From: Jesper Dangaard Brouer <brouer@redhat.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: netdev@vger.kernel.org, lorenzo.bianconi@redhat.com,
davem@davemloft.net, thomas.petazzoni@bootlin.com,
ilias.apalodimas@linaro.org, matteo.croce@redhat.com,
mw@semihalf.com, brouer@redhat.com
Subject: Re: [PATCH v2 net-next 4/8] net: mvneta: sync dma buffers before refilling hw queues
Date: Thu, 10 Oct 2019 09:08:31 +0200 [thread overview]
Message-ID: <20191010090831.5d6c41f2@carbon> (raw)
In-Reply-To: <744e01ea2c93200765ba8a77f0e6b0ca6baca513.1570662004.git.lorenzo@kernel.org>
On Thu, 10 Oct 2019 01:18:34 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> mvneta driver can run on not cache coherent devices so it is
> necessary to sync dma buffers before sending them to the device
> in order to avoid memory corruption. This patch introduce a performance
> penalty and it is necessary to introduce a more sophisticated logic
> in order to avoid dma sync as much as we can
Report with benchmarks here:
https://github.com/xdp-project/xdp-project/blob/master/areas/arm64/board_espressobin08_bench_xdp.org
We are testing this on an Espressobin board, and do see a huge
performance cost associated with this DMA-sync. Regardless we still
want to get this patch merged, to move forward with XDP support for
this driver.
We promised each-other (on IRC freenode #xdp) that we will follow-up
with a solution/mitigation, after this patchset is merged. There are
several ideas, that likely should get separate upstream review.
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
> ---
> drivers/net/ethernet/marvell/mvneta.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 79a6bac0192b..ba4aa9bbc798 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -1821,6 +1821,7 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
> struct mvneta_rx_queue *rxq,
> gfp_t gfp_mask)
> {
> + enum dma_data_direction dma_dir;
> dma_addr_t phys_addr;
> struct page *page;
>
> @@ -1830,6 +1831,9 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
> return -ENOMEM;
>
> phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
> + dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> + dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
> + MVNETA_MAX_RX_BUF_SIZE, dma_dir);
> mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
>
> return 0;
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
next prev parent reply other threads:[~2019-10-10 7:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 23:18 [PATCH v2 net-next 0/8] add XDP support to mvneta driver Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 1/8] net: mvneta: introduce mvneta_update_stats routine Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 2/8] net: mvneta: introduce page pool API for sw buffer manager Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 3/8] net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine Lorenzo Bianconi
2019-10-10 7:16 ` Ilias Apalodimas
2019-10-10 9:58 ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 4/8] net: mvneta: sync dma buffers before refilling hw queues Lorenzo Bianconi
2019-10-10 7:08 ` Jesper Dangaard Brouer [this message]
2019-10-10 7:21 ` Ilias Apalodimas
2019-10-10 9:18 ` Lorenzo Bianconi
2019-10-10 9:20 ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 5/8] net: mvneta: add basic XDP support Lorenzo Bianconi
2019-10-10 8:50 ` Jesper Dangaard Brouer
2019-10-10 9:57 ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 6/8] net: mvneta: move header prefetch in mvneta_swbm_rx_frame Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 7/8] net: mvneta: make tx buffer array agnostic Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 8/8] net: mvneta: add XDP_TX support Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010090831.5d6c41f2@carbon \
--to=brouer@redhat.com \
--cc=davem@davemloft.net \
--cc=ilias.apalodimas@linaro.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=matteo.croce@redhat.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.