[PATCH 1/2] arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT

[nikitos.tr@gmail.com]

From: Nikita Travkin <nikitos.tr@gmail.com>

WCNSS is used on L8150 for WiFi and BT.
Its firmware isn't relocatable and must be loaded at specific address.

Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
---
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 2b28e383fd0b..e4d467e7dedb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -18,6 +18,16 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		// wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
+		/delete-node/ wcnss@89300000;
+
+		wcnss_mem: wcnss@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
 	soc {
 		sdhci@7824000 {
 			status = "okay";
@@ -68,6 +78,10 @@
 			};
 		};
 
+		wcnss@a21b000 {
+			status = "okay";
+		};
+
 		/*
 		 * Attempting to enable these devices causes a "synchronous
 		 * external abort". Suspected cause is that the debug power
-- 
2.19.1