From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [CI v12 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master
Date: Fri, 18 Oct 2019 16:13:04 -0700 [thread overview]
Message-ID: <20191018231304.GF13211@intel.com> (raw)
In-Reply-To: <20191018172725.1338-6-manasi.d.navare@intel.com>
Pushed to dinq, thanks for reviews
manasi
On Fri, Oct 18, 2019 at 10:27:25AM -0700, Manasi Navare wrote:
> In the transcoder port sync mode, the slave transcoders mask their vblanks
> until master transcoder's vblank so while disabling them, make
> sure slaves are disabled first and then the masters.
>
> v5:
> * Dont pass dev priv to get_slave_crtc (Ville)
> v4:
> * Obtain slave state from master (Maarten)
> v3:
> * Rebase
> v2:
> * Use the intel_old_crtc_state_disables() helper
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 58 ++++++++++++++++++--
> 1 file changed, 52 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 22f5b213b80b..b57c9806b585 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14130,6 +14130,37 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> new_crtc_state);
> }
>
> +static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
> + struct intel_crtc *crtc,
> + struct intel_crtc_state *old_crtc_state,
> + struct intel_crtc_state *new_crtc_state)
> +{
> + struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
> + struct intel_crtc_state *new_slave_crtc_state =
> + intel_atomic_get_new_crtc_state(state, slave_crtc);
> + struct intel_crtc_state *old_slave_crtc_state =
> + intel_atomic_get_old_crtc_state(state, slave_crtc);
> +
> + WARN_ON(!slave_crtc || !new_slave_crtc_state ||
> + !old_slave_crtc_state);
> +
> + /* Disable Slave first */
> + intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
> + if (old_slave_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_slave_crtc_state,
> + new_slave_crtc_state,
> + slave_crtc);
> +
> + /* Disable Master */
> + intel_pre_plane_update(old_crtc_state, new_crtc_state);
> + if (old_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_crtc_state,
> + new_crtc_state,
> + crtc);
> +}
> +
> static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> {
> struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> @@ -14148,13 +14179,28 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> if (!needs_modeset(new_crtc_state))
> continue;
>
> - intel_pre_plane_update(old_crtc_state, new_crtc_state);
> + /* In case of Transcoder port Sync master slave CRTCs can be
> + * assigned in any order and we need to make sure that
> + * slave CRTCs are disabled first and then master CRTC since
> + * Slave vblanks are masked till Master Vblanks.
> + */
> + if (is_trans_port_sync_mode(new_crtc_state)) {
> + if (is_trans_port_sync_master(new_crtc_state))
> + intel_trans_port_sync_modeset_disables(state,
> + crtc,
> + old_crtc_state,
> + new_crtc_state);
> + else
> + continue;
> + } else {
> + intel_pre_plane_update(old_crtc_state, new_crtc_state);
>
> - if (old_crtc_state->base.active)
> - intel_old_crtc_state_disables(state,
> - old_crtc_state,
> - new_crtc_state,
> - crtc);
> + if (old_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_crtc_state,
> + new_crtc_state,
> + crtc);
> + }
> }
> }
>
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-10-18 23:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 17:27 [CI v12 1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Manasi Navare
2019-10-18 17:27 ` [CI v12 2/6] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports Manasi Navare
2019-10-18 23:11 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 3/6] drm/i915/display/icl: HW state readout for transcoder port sync config Manasi Navare
2019-10-18 23:11 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 4/6] drm/i915/display/icl: Enable master-slaves in trans port sync Manasi Navare
2019-10-18 23:12 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 5/6] drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence Manasi Navare
2019-10-18 23:12 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master Manasi Navare
2019-10-18 23:13 ` Manasi Navare [this message]
2019-10-18 18:47 ` ✓ Fi.CI.BAT: success for series starting with [CI,v12,1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Patchwork
2019-10-18 21:41 ` ✓ Fi.CI.IGT: " Patchwork
2019-10-18 23:10 ` [CI v12 1/6] " Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191018231304.GF13211@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.