From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sat, 19 Oct 2019 10:25:07 -0400 Subject: [U-Boot] [PATCH] spl: mmc: make eMMC HW boot partition configuration optional In-Reply-To: <20191018193833.8481-1-agust@denx.de> References: <20191018193833.8481-1-agust@denx.de> Message-ID: <20191019142507.GG11173@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Oct 18, 2019 at 09:38:33PM +0200, Anatolij Gustschin wrote: > Loading U-Boot on i.MX8QXP MEK board is broken since recent changes > in spl_mmc: > > U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) > Normal Boot > WDT: Not found! > Trying to boot from MMC2_2 > Load image from MMC/SD 0x46400 > spl: mmc partition switch failed > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option > is selected automatically and overrides the EXT_CSC_PART_CONFIG > configurations with default value, always selecting the eMMC boot > partition 1. Boards which place U-Boot image in other partitions > became not bootable. > > Fix this by making the eMMC HW boot partition selection optional. > > Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) > Reviewed-by: Lukasz Majewski > Signed-off-by: Anatolij Gustschin Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: