From: Guenter Roeck <linux@roeck-us.net>
To: "Nuno Sá" <nuno.sa@analog.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
Jean Delvare <jdelvare@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation
Date: Sun, 20 Oct 2019 09:12:56 -0700 [thread overview]
Message-ID: <20191020161256.GA27823@roeck-us.net> (raw)
In-Reply-To: <20191009102806.262241-2-nuno.sa@analog.com>
On Wed, Oct 09, 2019 at 12:28:06PM +0200, Nuno Sá wrote:
> Document the AXI FAN Control IP core devicetree bindings.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> Changes in v2:
> * Set the correct license for new bindings;
> * Fix wrong compatible in the example;
> * Wrap long line;
> * Update adi,pulses-per-revolution with accepted values.
>
> .../bindings/hwmon/adi,axi-fan-control.yaml | 62 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> new file mode 100644
> index 000000000000..dc82b9748c9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2019 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AXI FAN Control Device Tree Bindings
> +
> +maintainers:
> + - Nuno Sá <nuno.sa@analog.com>
> +
> +description: |+
> + Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
> + core can be found in:
> +
> + https://wiki.analog.com/resources/fpga/docs/axi_fan_control
> +
> +properties:
> + compatible:
> + enum:
> + - adi,axi-fan-control-1.00.a
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + adi,pulses-per-revolution:
> + description:
> + Value specifying the number of pulses per revolution of the controlled
> + FAN.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4]
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - interrupts
> + - adi,pulses-per-revolution
> +
> +examples:
> + - |
> + fpga_axi: fpga-axi@0 {
> + #address-cells = <0x2>;
> + #size-cells = <0x1>;
> +
> + axi_fan_control: axi-fan-control@80000000 {
> + compatible = "adi,axi-fan-control-1.00.a";
> + reg = <0x0 0x80000000 0x10000>;
> + clocks = <&clk 71>;
> + interrupts = <0 110 0>;
> + adi,pulses-per-revolution = <2>;
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index caa80ae1925e..74ddcb3e1fd9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2879,6 +2879,7 @@ W: http://ez.analog.com/community/linux-device-drivers
> L: linux-hwmon@vger.kernel.org
> S: Supported
> F: drivers/hwmon/axi-fan-control.c
> +F: Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
>
> AXXIA I2C CONTROLLER
> M: Krzysztof Adamski <krzysztof.adamski@nokia.com>
next prev parent reply other threads:[~2019-10-20 16:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 10:28 [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Nuno Sá
2019-10-09 10:28 ` [PATCH v2 2/2] dt-bindings: hwmon: Add AXI FAN Control documentation Nuno Sá
2019-10-11 16:59 ` Rob Herring
2019-10-20 16:12 ` Guenter Roeck [this message]
2019-10-20 16:12 ` [PATCH v2 1/2] hwmon: Support ADI Fan Control IP Guenter Roeck
2020-02-05 8:11 ` Sa, Nuno
2020-02-05 16:03 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191020161256.GA27823@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nuno.sa@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.