From: linux-kernel-dev at beckhoff.com <linux-kernel-dev@beckhoff.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
Date: Wed, 23 Oct 2019 07:40:40 +0200 [thread overview]
Message-ID: <20191023054043.22984-2-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20191023054043.22984-1-linux-kernel-dev@beckhoff.com>
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
arch/arm/dts/imx53-cx9020.dts | 31 ++++++++++++++++++++-----------
configs/mx53cx9020_defconfig | 2 ++
include/configs/mx53cx9020.h | 4 ----
3 files changed, 22 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts
index 36ceae36aa9..2b7f7288088 100644
--- a/arch/arm/dts/imx53-cx9020.dts
+++ b/arch/arm/dts/imx53-cx9020.dts
@@ -99,17 +99,6 @@
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- MX53_PAD_FEC_MDC__FEC_MDC 0x4
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
-
MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
@@ -148,6 +137,21 @@
>;
};
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ >;
+ };
+
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
@@ -209,5 +213,10 @@
pinctrl-names = "default";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
+ pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
+ fixed-link { /* RMII fixed link to KZ8863 */
+ speed = <100>;
+ full-duplex;
+ };
};
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 4ed38250f31..17c44bd070a 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -28,7 +28,9 @@ CONFIG_FPGA_CYCLON2=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC_IMX=y
+CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
+CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index bbe05740330..f1007915118 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -35,10 +35,6 @@
/* bootz: zImage/initrd.img support */
-/* Eth Configs */
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_FEC_MXC_PHYADDR 0x1F
/* USB Configs */
#define CONFIG_MXC_USB_PORT 1
--
2.23.0
next prev parent reply other threads:[~2019-10-23 5:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 5:40 [U-Boot] [PATCH 0/4] Migrate cx9020 to DM_ETH, DM_USB and distro boot linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` linux-kernel-dev at beckhoff.com [this message]
2019-10-23 5:40 ` [U-Boot] [PATCH 2/4] imx: cx9020: migrate cx9020 to CONFIG_DM_USB linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 3/4] imx: cx9020: enable vidconsole by default linux-kernel-dev at beckhoff.com
2019-10-23 5:40 ` [U-Boot] [PATCH 4/4] imx: cx9020: use distro boot linux-kernel-dev at beckhoff.com
-- strict thread matches above, loose matches on Subject: below --
2019-12-29 10:26 [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191023054043.22984-2-linux-kernel-dev@beckhoff.com \
--to=linux-kernel-dev@beckhoff.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.