All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
	Michael Jamet <michael.jamet@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	Rajmohan Mani <rajmohan.mani@intel.com>,
	Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>,
	Lukas Wunner <lukas@wunner.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Mario.Limonciello@dell.com,
	Anthony Wong <anthony.wong@canonical.com>,
	Oliver Neukum <oneukum@suse.com>,
	Christian Kellner <ckellner@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 19/25] thunderbolt: Call tb_eeprom_get_drom_offset() from tb_eeprom_read_n()
Date: Wed, 23 Oct 2019 14:21:48 +0300	[thread overview]
Message-ID: <20191023112154.64235-20-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20191023112154.64235-1-mika.westerberg@linux.intel.com>

We are going to re-use tb_drom_read() for USB4 DROM reading as well.
USB4 has separate router operations for this which does not need the
drom_offset. Therefore we move call to tb_eeprom_get_drom_offset() into
tb_eeprom_read_n() where it is needed.

While there change return -ENOSYS to -ENODEV because the former is only
supposed to be used with system calls (invalid syscall nr).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/eeprom.c | 88 ++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 45 deletions(-)

diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c
index 8dd7de0cc826..540e0105bcc0 100644
--- a/drivers/thunderbolt/eeprom.c
+++ b/drivers/thunderbolt/eeprom.c
@@ -130,13 +130,52 @@ static int tb_eeprom_in(struct tb_switch *sw, u8 *val)
 	return 0;
 }
 
+/**
+ * tb_eeprom_get_drom_offset - get drom offset within eeprom
+ */
+static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset)
+{
+	struct tb_cap_plug_events cap;
+	int res;
+
+	if (!sw->cap_plug_events) {
+		tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n");
+		return -ENODEV;
+	}
+	res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events,
+			     sizeof(cap) / 4);
+	if (res)
+		return res;
+
+	if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) {
+		tb_sw_warn(sw, "no NVM\n");
+		return -ENODEV;
+	}
+
+	if (cap.drom_offset > 0xffff) {
+		tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n",
+				cap.drom_offset);
+		return -ENXIO;
+	}
+	*offset = cap.drom_offset;
+	return 0;
+}
+
 /**
  * tb_eeprom_read_n - read count bytes from offset into val
  */
 static int tb_eeprom_read_n(struct tb_switch *sw, u16 offset, u8 *val,
 		size_t count)
 {
+	u16 drom_offset;
 	int i, res;
+
+	res = tb_eeprom_get_drom_offset(sw, &drom_offset);
+	if (res)
+		return res;
+
+	offset += drom_offset;
+
 	res = tb_eeprom_active(sw, true);
 	if (res)
 		return res;
@@ -238,36 +277,6 @@ struct tb_drom_entry_port {
 } __packed;
 
 
-/**
- * tb_eeprom_get_drom_offset - get drom offset within eeprom
- */
-static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset)
-{
-	struct tb_cap_plug_events cap;
-	int res;
-	if (!sw->cap_plug_events) {
-		tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n");
-		return -ENOSYS;
-	}
-	res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events,
-			     sizeof(cap) / 4);
-	if (res)
-		return res;
-
-	if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) {
-		tb_sw_warn(sw, "no NVM\n");
-		return -ENOSYS;
-	}
-
-	if (cap.drom_offset > 0xffff) {
-		tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n",
-				cap.drom_offset);
-		return -ENXIO;
-	}
-	*offset = cap.drom_offset;
-	return 0;
-}
-
 /**
  * tb_drom_read_uid_only - read uid directly from drom
  *
@@ -277,17 +286,11 @@ static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset)
 int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid)
 {
 	u8 data[9];
-	u16 drom_offset;
 	u8 crc;
-	int res = tb_eeprom_get_drom_offset(sw, &drom_offset);
-	if (res)
-		return res;
-
-	if (drom_offset == 0)
-		return -ENODEV;
+	int res;
 
 	/* read uid */
-	res = tb_eeprom_read_n(sw, drom_offset, data, 9);
+	res = tb_eeprom_read_n(sw, 0, data, 9);
 	if (res)
 		return res;
 
@@ -489,7 +492,6 @@ static int tb_drom_copy_nvm(struct tb_switch *sw, u16 *size)
  */
 int tb_drom_read(struct tb_switch *sw)
 {
-	u16 drom_offset;
 	u16 size;
 	u32 crc;
 	struct tb_drom_header *header;
@@ -517,11 +519,7 @@ int tb_drom_read(struct tb_switch *sw)
 		return 0;
 	}
 
-	res = tb_eeprom_get_drom_offset(sw, &drom_offset);
-	if (res)
-		return res;
-
-	res = tb_eeprom_read_n(sw, drom_offset + 14, (u8 *) &size, 2);
+	res = tb_eeprom_read_n(sw, 14, (u8 *) &size, 2);
 	if (res)
 		return res;
 	size &= 0x3ff;
@@ -535,7 +533,7 @@ int tb_drom_read(struct tb_switch *sw)
 	sw->drom = kzalloc(size, GFP_KERNEL);
 	if (!sw->drom)
 		return -ENOMEM;
-	res = tb_eeprom_read_n(sw, drom_offset, sw->drom, size);
+	res = tb_eeprom_read_n(sw, 0, sw->drom, size);
 	if (res)
 		goto err;
 
-- 
2.23.0


  parent reply	other threads:[~2019-10-23 11:22 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-23 11:21 [PATCH 00/25] thunderbolt: Add support for USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 01/25] thunderbolt: Introduce tb_switch_is_icm() Mika Westerberg
2019-10-23 11:21 ` [PATCH 02/25] thunderbolt: Log switch route string on config read/write timeout Mika Westerberg
2019-10-23 11:21 ` [PATCH 03/25] thunderbolt: Log error if adding switch fails Mika Westerberg
2019-10-23 11:21 ` [PATCH 04/25] thunderbolt: Convert basic adapter register names to follow the USB4 spec Mika Westerberg
2019-10-23 11:21 ` [PATCH 05/25] thunderbolt: Convert PCIe " Mika Westerberg
2019-10-23 11:21 ` [PATCH 06/25] thunderbolt: Convert DP " Mika Westerberg
2019-10-23 11:21 ` [PATCH 07/25] thunderbolt: Make tb_sw_write() take const parameter Mika Westerberg
2019-10-23 11:21 ` [PATCH 08/25] thunderbolt: Add helper macro to iterate over switch ports Mika Westerberg
2019-10-23 11:21 ` [PATCH 09/25] thunderbolt: Refactor add_switch() into two functions Mika Westerberg
2019-10-23 11:21 ` [PATCH 10/25] thunderbolt: Add support for lane bonding Mika Westerberg
2019-10-23 11:21 ` [PATCH 11/25] thunderbolt: Add default linking between lane adapters if not provided by DROM Mika Westerberg
2019-10-23 11:21 ` [PATCH 12/25] thunderbolt: Expand controller name in tb_switch_is_xy() Mika Westerberg
2019-10-23 11:21 ` [PATCH 13/25] thunderbolt: Add downstream PCIe port mappings for Alpine and Titan Ridge Mika Westerberg
2019-10-23 11:21 ` [PATCH 14/25] thunderbolt: Add Display Port CM handshake for Titan Ridge devices Mika Westerberg
2019-10-23 11:21 ` [PATCH 15/25] thunderbolt: Add Display Port adapter pairing and resource management Mika Westerberg
2019-10-23 11:21 ` [PATCH 16/25] thunderbolt: Add bandwidth management for Display Port tunnels Mika Westerberg
2019-10-23 11:21 ` [PATCH 17/25] thunderbolt: Do not start firmware unless asked by the user Mika Westerberg
2019-10-23 11:21 ` [PATCH 18/25] thunderbolt: Make tb_find_port() available to other files Mika Westerberg
2019-10-23 11:21 ` Mika Westerberg [this message]
2019-10-23 11:21 ` [PATCH 20/25] thunderbolt: Add initial support for USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 21/25] thunderbolt: Update Kconfig entry to USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 22/25] thunderbolt: Make tb_switch_find_cap() available to other files Mika Westerberg
2019-10-23 11:21 ` [PATCH 23/25] thunderbolt: Add support for Time Management Unit Mika Westerberg
2019-10-23 11:21 ` [PATCH 24/25] thunderbolt: Add support for USB 3.x tunnels Mika Westerberg
2019-10-23 11:21 ` [PATCH 25/25] thunderbolt: Update documentation with the USB4 information Mika Westerberg
2019-10-23 15:55 ` [PATCH 00/25] thunderbolt: Add support for USB4 Mario.Limonciello
2019-10-23 16:18   ` Mika Westerberg
2019-11-01 11:43 ` Mika Westerberg
2019-11-04 14:31   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191023112154.64235-20-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=Mario.Limonciello@dell.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=anthony.wong@canonical.com \
    --cc=ckellner@redhat.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    --cc=nicholas.johnson-opensource@outlook.com.au \
    --cc=oneukum@suse.com \
    --cc=rajmohan.mani@intel.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.