Re: [PATCH v4 00/16] libqos: add VIRTIO PCI 1.0 support

["Michael S. Tsirkin" <mst@redhat.com>]

On Wed, Oct 23, 2019 at 11:04:09AM +0100, Stefan Hajnoczi wrote:
> v4:
>  * Introduce bool d->features_negotiated so that tests can negotiate a
>    0 feature bit set in Legacy mode [Thomas]
>  * Make the FEATURES_OK code change in qvirtio_set_driver_ok() clearer and
>    mention it in the commit description [Thomas]
>  * Fix indentation in qvring_init() [Thomas]
> v3:
>  * Now implements VIRTIO 1.0 fully (vring, device initialization).
>    This required several new patches to address the following issues:
>    1. Tests that do not negotiate features (non-compliant!)
>    2. Tests that access configuration space before feature negotiation
>       (non-compliant!)
>    3. Tests that set up virtqueues before feature negotiation (non-compliant!)
>    4. vring accesses require byte-swapping when VIRTIO 1.0 is used with a
>       big-endian guest because the qtest_readX/writeX() API automatically
>       converts to guest-endian
>    5. VIRTIO 1.0 has an additional FEATURES_OK step during Device
>       Initialization
>  * Change uint8_t bar_idx to int [Thomas]
>  * Document qpci_find_capability() [Thomas]
>  * Every commit tested with arm, ppc64, and x86_64 targets using:
>    git rebase -i origin/master -x 'make tests/qos-test &&
>    QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 tests/qos-test &&
>    QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/qos-test'
>    QTEST_QEMU_BINARY=arm-softmmu/qemu-system-arm tests/qos-test'
> v2:
>  * Fix checkpatch.pl issues, except MAINTAINERS file warning.  libqos already
>    has maintainers and the new virtio-pci-modern.[ch] files don't need extra
>    entries since they are already covered by the existing libqos/ entry.
> 
> New VIRTIO devices are Non-Transitional.  This means they only expose the
> VIRTIO 1.0 interface, not the Legacy interface.
> 
> The libqos only supports Legacy and Transitional devices (in Legacy mode).
> This patch series adds VIRTIO 1.0 support so that tests can run against
> Non-Transitional devices too.

Very nice, thanks!
I'll queue this up in my tree.

> The virtio-fs device is Non-Transitional, so this is a prerequisite for
> virtio-fs qos tests.
> 
> Stefan Hajnoczi (16):
>   tests/virtio-blk-test: read config space after feature negotiation
>   libqos: read QVIRTIO_MMIO_VERSION register
>   libqos: extend feature bits to 64-bit
>   virtio-scsi-test: add missing feature negotiation
>   tests/virtio-blk-test: set up virtqueue after feature negotiation
>   libqos: add missing virtio-9p feature negotiation
>   libqos: enforce Device Initialization order
>   libqos: implement VIRTIO 1.0 FEATURES_OK step
>   libqos: access VIRTIO 1.0 vring in little-endian
>   libqos: add iteration support to qpci_find_capability()
>   libqos: pass full QVirtQueue to set_queue_address()
>   libqos: add MSI-X callbacks to QVirtioPCIDevice
>   libqos: expose common virtqueue setup/cleanup functions
>   libqos: make the virtio-pci BAR index configurable
>   libqos: extract Legacy virtio-pci.c code
>   libqos: add VIRTIO PCI 1.0 support
> 
>  tests/Makefile.include           |   1 +
>  tests/libqos/pci.h               |   2 +-
>  tests/libqos/virtio-mmio.h       |   1 +
>  tests/libqos/virtio-pci-modern.h |  17 ++
>  tests/libqos/virtio-pci.h        |  34 ++-
>  tests/libqos/virtio.h            |  19 +-
>  tests/libqos/pci.c               |  30 ++-
>  tests/libqos/virtio-9p.c         |   6 +
>  tests/libqos/virtio-mmio.c       |  38 ++-
>  tests/libqos/virtio-net.c        |   6 +-
>  tests/libqos/virtio-pci-modern.c | 443 +++++++++++++++++++++++++++++++
>  tests/libqos/virtio-pci.c        | 105 +++++---
>  tests/libqos/virtio.c            | 160 ++++++++---
>  tests/virtio-blk-test.c          |  66 +++--
>  tests/virtio-scsi-test.c         |   8 +
>  15 files changed, 802 insertions(+), 134 deletions(-)
>  create mode 100644 tests/libqos/virtio-pci-modern.h
>  create mode 100644 tests/libqos/virtio-pci-modern.c
> 
> -- 
> 2.21.0