From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 02/19] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped
Date: Wed, 30 Oct 2019 01:00:02 +0300 [thread overview]
Message-ID: <20191029220019.26773-3-digetx@gmail.com> (raw)
In-Reply-To: <20191029220019.26773-1-digetx@gmail.com>
There is no real need to keep interrupt always-enabled, will be nicer
to keep it disabled while governor is inactive.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/devfreq/tegra30-devfreq.c | 47 ++++++++++++++++---------------
1 file changed, 24 insertions(+), 23 deletions(-)
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index a27300f40b0b..8be6a33beb9c 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -11,6 +11,7 @@
#include <linux/devfreq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
@@ -416,8 +417,6 @@ static void tegra_actmon_start(struct tegra_devfreq *tegra)
{
unsigned int i;
- disable_irq(tegra->irq);
-
actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
ACTMON_GLB_PERIOD_CTRL);
@@ -442,8 +441,6 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra)
}
actmon_write_barrier(tegra);
-
- enable_irq(tegra->irq);
}
static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
@@ -552,6 +549,12 @@ static int tegra_governor_event_handler(struct devfreq *devfreq,
{
struct tegra_devfreq *tegra = dev_get_drvdata(devfreq->dev.parent);
+ /*
+ * Couple device with the governor early as it is needed at
+ * the moment of governor's start (used by ISR).
+ */
+ tegra->devfreq = devfreq;
+
switch (event) {
case DEVFREQ_GOV_START:
devfreq_monitor_start(devfreq);
@@ -586,10 +589,11 @@ static struct devfreq_governor tegra_devfreq_governor = {
static int tegra_devfreq_probe(struct platform_device *pdev)
{
- struct tegra_devfreq *tegra;
struct tegra_devfreq_device *dev;
- unsigned int i;
+ struct tegra_devfreq *tegra;
+ struct devfreq *devfreq;
unsigned long rate;
+ unsigned int i;
int err;
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
@@ -625,6 +629,16 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
}
tegra->irq = err;
+ irq_set_status_flags(tegra->irq, IRQ_NOAUTOEN);
+
+ err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
+ actmon_thread_isr, IRQF_ONESHOT,
+ "tegra-devfreq", tegra);
+ if (err) {
+ dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
+ return err;
+ }
+
reset_control_assert(tegra->reset);
err = clk_prepare_enable(tegra->clock);
@@ -672,28 +686,15 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
}
tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
- tegra->devfreq = devfreq_add_device(&pdev->dev,
- &tegra_devfreq_profile,
- "tegra_actmon",
- NULL);
- if (IS_ERR(tegra->devfreq)) {
- err = PTR_ERR(tegra->devfreq);
+ devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
+ "tegra_actmon", NULL);
+ if (IS_ERR(devfreq)) {
+ err = PTR_ERR(devfreq);
goto remove_governor;
}
- err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
- actmon_thread_isr, IRQF_ONESHOT,
- "tegra-devfreq", tegra);
- if (err) {
- dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
- goto remove_devfreq;
- }
-
return 0;
-remove_devfreq:
- devfreq_remove_device(tegra->devfreq);
-
remove_governor:
devfreq_remove_governor(&tegra_devfreq_governor);
--
2.23.0
next prev parent reply other threads:[~2019-10-29 22:06 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 22:00 [PATCH v7 00/19] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 01/19] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-10-29 22:00 ` Dmitry Osipenko [this message]
2019-10-29 22:00 ` [PATCH v7 03/19] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 04/19] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 05/19] PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 06/19] PM / devfreq: tegra30: Use kHz units uniformly in the code Dmitry Osipenko
2019-10-31 4:44 ` Chanwoo Choi
2019-10-31 23:08 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 07/19] PM / devfreq: tegra30: Use CPUFreq notifier Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 08/19] PM / devfreq: tegra30: Move clk-notifier's registration to governor's start Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 09/19] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 10/19] PM / devfreq: tegra30: Don't enable consecutive-down interrupt " Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 11/19] PM / devfreq: tegra30: Constify structs Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 12/19] PM / devfreq: tegra30: Include appropriate header Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 13/19] PM / devfreq: tegra30: Increase sampling period to 16ms Dmitry Osipenko
2019-11-01 21:53 ` Michał Mirosław
2019-10-29 22:00 ` [PATCH v7 14/19] PM / devfreq: tegra30: Don't enable already enabled consecutive interrupts Dmitry Osipenko
2019-11-01 7:00 ` Chanwoo Choi
2019-10-29 22:00 ` [PATCH v7 15/19] PM / devfreq: tegra30: Disable consecutive interrupts when appropriate Dmitry Osipenko
2019-11-01 7:01 ` Chanwoo Choi
2019-10-29 22:00 ` [PATCH v7 16/19] PM / devfreq: Add new interrupt_driven flag for governors Dmitry Osipenko
2019-11-01 7:32 ` Chanwoo Choi
2019-11-01 13:56 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 17/19] PM / devfreq: tegra30: Support variable polling interval Dmitry Osipenko
2019-11-01 7:41 ` Chanwoo Choi
2019-11-01 13:55 ` Dmitry Osipenko
2019-11-01 21:58 ` Michał Mirosław
2019-11-01 22:23 ` Dmitry Osipenko
2019-11-03 15:25 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 18/19] PM / devfreq: tegra30: Tune up MCCPU boost-down coefficient Dmitry Osipenko
2019-11-01 7:45 ` Chanwoo Choi
2019-11-01 14:14 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 19/19] PM / devfreq: tegra20/30: Add Dmitry as a maintainer Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029220019.26773-3-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=cw00.choi@samsung.com \
--cc=jonathanh@nvidia.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.