From: Thierry Reding <thierry.reding@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Vidya Sagar <vidyas@nvidia.com>,
linux-gpio@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH 3/3] gpio: tegra186: Add debounce support
Date: Fri, 8 Nov 2019 16:33:53 +0100 [thread overview]
Message-ID: <20191108153353.3149078-3-thierry.reding@gmail.com> (raw)
In-Reply-To: <20191108153353.3149078-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
The GPIO controller found on Tegra186 and later supports debouncing for
inputs for up to 255 ms.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/gpio/gpio-tegra186.c | 38 ++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 404ebb82bfa2..c4e23f530664 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -32,6 +32,7 @@
#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE (0x3 << 2)
#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK (0x3 << 2)
#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL BIT(4)
+#define TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE BIT(5)
#define TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT BIT(6)
#define TEGRA186_GPIO_DEBOUNCE_CONTROL 0x04
@@ -217,6 +218,42 @@ static void tegra186_gpio_set(struct gpio_chip *chip, unsigned int offset,
writel(value, base + TEGRA186_GPIO_OUTPUT_VALUE);
}
+static int tegra186_gpio_set_config(struct gpio_chip *chip,
+ unsigned int offset,
+ unsigned long config)
+{
+ struct tegra_gpio *gpio = gpiochip_get_data(chip);
+ u32 debounce, value;
+ void __iomem *base;
+
+ base = tegra186_gpio_get_base(gpio, offset);
+ if (base == NULL)
+ return -ENXIO;
+
+ if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+ return -ENOTSUPP;
+
+ debounce = pinconf_to_config_argument(config);
+
+ /*
+ * The Tegra186 GPIO controller supports a maximum of 255 ms debounce
+ * time.
+ */
+ if (debounce > 255000)
+ return -EINVAL;
+
+ debounce = DIV_ROUND_UP(debounce, USEC_PER_MSEC);
+
+ value = TEGRA186_GPIO_DEBOUNCE_CONTROL_THRESHOLD(debounce);
+ writel(value, base + TEGRA186_GPIO_DEBOUNCE_CONTROL);
+
+ value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE;
+ writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+ return 0;
+}
+
static int tegra186_gpio_of_xlate(struct gpio_chip *chip,
const struct of_phandle_args *spec,
u32 *flags)
@@ -539,6 +576,7 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
gpio->gpio.direction_output = tegra186_gpio_direction_output;
gpio->gpio.get = tegra186_gpio_get,
gpio->gpio.set = tegra186_gpio_set;
+ gpio->gpio.set_config = tegra186_gpio_set_config;
gpio->gpio.base = -1;
--
2.23.0
next prev parent reply other threads:[~2019-11-08 15:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-08 15:33 [PATCH 1/3] gpio: tegra186: Derive register offsets from bank/port Thierry Reding
2019-11-08 15:33 ` [PATCH 2/3] gpio: tegra186: Program interrupt route mapping Thierry Reding
2019-11-12 10:11 ` Bartosz Golaszewski
2019-11-12 14:10 ` Greg KH
2019-11-12 15:33 ` Bartosz Golaszewski
2019-11-08 15:33 ` Thierry Reding [this message]
2019-11-12 15:33 ` [PATCH 1/3] gpio: tegra186: Derive register offsets from bank/port Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191108153353.3149078-3-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=jonathanh@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.