From: Thomas Huth <thuth@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: "David Hildenbrand" <david@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>
Subject: [kvm-unit-test PATCH 1/5] travis.yml: Re-arrange the test matrix
Date: Wed, 13 Nov 2019 12:26:45 +0100 [thread overview]
Message-ID: <20191113112649.14322-2-thuth@redhat.com> (raw)
In-Reply-To: <20191113112649.14322-1-thuth@redhat.com>
We will soon need more control over the individual test matrix
entries, so we should not limit the matrix to "env" sections,
i.e. put the "matrix:" keyword on the top, not the "env:".
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
.travis.yml | 92 ++++++++++++++++++++++++++++++++---------------------
1 file changed, 56 insertions(+), 36 deletions(-)
diff --git a/.travis.yml b/.travis.yml
index 6c14953..611bbdc 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -16,44 +16,64 @@ addons:
- qemu-system
git:
submodules: false
-env:
- matrix:
- - CONFIG=""
- BUILD_DIR="."
- TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
+
+matrix:
+ include:
+ - env:
+ - CONFIG=""
+ - BUILD_DIR="."
+ - TESTS="vmexit_cpuid vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ipi
vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed"
- - CONFIG=""
- BUILD_DIR="x86-builddir"
- TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
+
+ - env:
+ - CONFIG=""
+ - BUILD_DIR="x86-builddir"
+ - TESTS="ioapic-split ioapic smptest smptest3 eventinj msr port80 syscall
tsc rmap_chain umip intel_iommu vmexit_inl_pmtimer vmexit_ipi_halt"
- - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
- BUILD_DIR="."
- TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
- - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
- BUILD_DIR="arm-buildir"
- TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
- - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
- BUILD_DIR="."
- TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
- - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
- BUILD_DIR="arm64-buildir"
- TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
- - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
- BUILD_DIR="."
- TESTS="spapr_hcall emulator rtas-set-time-of-day"
- ACCEL="tcg,cap-htm=off"
- - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
- BUILD_DIR="ppc64le-buildir"
- TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
- ACCEL="tcg,cap-htm=off"
- - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
- BUILD_DIR="."
- TESTS="diag10 diag308"
- ACCEL="tcg,firmware=s390x/run"
- - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
- BUILD_DIR="s390x-builddir"
- TESTS="sieve"
- ACCEL="tcg,firmware=s390x/run"
+
+ - env:
+ - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
+ - BUILD_DIR="."
+ - TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
+
+ - env:
+ - CONFIG="--arch=arm --cross-prefix=arm-linux-gnueabihf-"
+ - BUILD_DIR="arm-buildir"
+ - TESTS="pci-test pmu gicv2-active gicv3-active psci selftest-setup"
+
+ - env:
+ - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
+ - BUILD_DIR="."
+ - TESTS="selftest-vectors-kernel selftest-vectors-user selftest-smp"
+
+ - env:
+ - CONFIG="--arch=arm64 --cross-prefix=aarch64-linux-gnu-"
+ - BUILD_DIR="arm64-buildir"
+ - TESTS="pci-test pmu gicv2-active gicv3-active psci timer selftest-setup"
+
+ - env:
+ - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
+ - BUILD_DIR="."
+ - TESTS="spapr_hcall emulator rtas-set-time-of-day"
+ - ACCEL="tcg,cap-htm=off"
+
+ - env:
+ - CONFIG="--arch=ppc64 --endian=little --cross-prefix=powerpc64le-linux-gnu-"
+ - BUILD_DIR="ppc64le-buildir"
+ - TESTS="rtas-get-time-of-day rtas-get-time-of-day-base"
+ - ACCEL="tcg,cap-htm=off"
+
+ - env:
+ - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
+ - BUILD_DIR="."
+ - TESTS="diag10 diag308"
+ - ACCEL="tcg,firmware=s390x/run"
+
+ - env:
+ - CONFIG="--arch=s390x --cross-prefix=s390x-linux-gnu-"
+ - BUILD_DIR="s390x-builddir"
+ - TESTS="sieve"
+ - ACCEL="tcg,firmware=s390x/run"
before_script:
- mkdir -p $BUILD_DIR && cd $BUILD_DIR
--
2.23.0
next prev parent reply other threads:[~2019-11-13 11:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-13 11:26 [kvm-unit-test PATCH 0/5] Improvements for the Travis CI Thomas Huth
2019-11-13 11:26 ` Thomas Huth [this message]
2019-11-13 12:54 ` [kvm-unit-test PATCH 1/5] travis.yml: Re-arrange the test matrix Alex Bennée
2019-11-13 11:26 ` [kvm-unit-test PATCH 2/5] travis.yml: Install only the required packages for each entry in the matrix Thomas Huth
2019-11-13 12:54 ` Alex Bennée
2019-11-13 11:26 ` [kvm-unit-test PATCH 3/5] travis.yml: Test with KVM instead of TCG (on x86) Thomas Huth
2019-11-13 13:49 ` Alex Bennée
2019-11-13 16:07 ` Thomas Huth
2019-11-13 17:48 ` [kvm-unit-tests PATCH v2] " Thomas Huth
2019-11-13 11:26 ` [kvm-unit-test PATCH 4/5] travis.yml: Test the i386 build, too Thomas Huth
2019-11-13 15:05 ` Alex Bennée
2019-11-13 11:26 ` [kvm-unit-test PATCH 5/5] travis.yml: Expect that at least one test succeeds Thomas Huth
2019-11-13 15:06 ` Alex Bennée
2019-11-13 15:17 ` Thomas Huth
2019-11-13 16:03 ` Alex Bennée
2019-11-13 14:50 ` [kvm-unit-test PATCH 0/5] Improvements for the Travis CI Paolo Bonzini
2019-11-14 12:29 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191113112649.14322-2-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=david@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.