[U-Boot] [PATCH v1 3/4] dfu: Add optional timeout parameter

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

When the `dfu` command is called from the U-Boot environment,
it now accepts an optional parameter that specifies a timeout (in seconds).
If a DFU connection is not made within that time the `dfu` command exits
(as it would if Ctrl+C was pressed). If the timeout is left empty or being
zero the `dfu` command behaves as it does now.

This is useful for allowing U-Boot to check to see if anything wants to
upload new firmware before continuing to boot.

The patch is based on the commit
https://github.com/01org/edison-u-boot/commit/5e966ccc3c65c18c9783741fa04e0c45e021780c
which has been heavily reworked due to U-Boot changes in the past.

Signed-off-by: Sebastien Colleur <sebastienx.colleur@intel.com>
Signed-off-by: Brad Campbell <bradjc5@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 cmd/dfu.c           | 15 +++++++++++++--
 common/dfu.c        | 17 +++++++++++++++++
 drivers/dfu/Kconfig |  6 ++++++
 drivers/dfu/dfu.c   | 15 +++++++++++++++
 include/dfu.h       |  5 +++++
 5 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/cmd/dfu.c b/cmd/dfu.c
index 14a8ec879e..b30f8a5667 100644
--- a/cmd/dfu.c
+++ b/cmd/dfu.c
@@ -30,7 +30,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #if defined(CONFIG_DFU_OVER_USB) || defined(CONFIG_DFU_OVER_TFTP)
 	char *interface = NULL;
 	char *devstring = NULL;
-#if defined(CONFIG_DFU_OVER_TFTP)
+#if defined(CONFIG_DFU_TIMEOUT) || defined(CONFIG_DFU_OVER_TFTP)
 	unsigned long value = 0;
 #endif
 
@@ -39,7 +39,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		devstring = argv[3];
 	}
 
-#if defined(CONFIG_DFU_OVER_TFTP)
+#if defined(CONFIG_DFU_TIMEOUT) || defined(CONFIG_DFU_OVER_TFTP)
 	if (argc == 5 || argc == 3)
 		value = simple_strtoul(argv[argc - 1], NULL, 0);
 #endif
@@ -55,6 +55,10 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (ret)
 		goto done;
 
+#ifdef CONFIG_DFU_TIMEOUT
+	dfu_set_timeout(value * 1000);
+#endif
+
 	ret = CMD_RET_SUCCESS;
 	if (strcmp(argv[argc - 1], "list") == 0) {
 		dfu_show_entities();
@@ -75,10 +79,17 @@ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
 	"Device Firmware Upgrade",
 	""
 #ifdef CONFIG_DFU_OVER_USB
+#ifdef CONFIG_DFU_TIMEOUT
+	"<USB_controller> [<interface> <dev>] [<timeout>] [list]\n"
+#else
 	"<USB_controller> [<interface> <dev>] [list]\n"
+#endif
 	"  - device firmware upgrade via <USB_controller>\n"
 	"    on device <dev>, attached to interface\n"
 	"    <interface>\n"
+#ifdef CONFIG_DFU_TIMEOUT
+	"    [<timeout>] - specify inactivity timeout in seconds\n"
+#endif
 	"    [list] - list available alt settings\n"
 #endif
 #ifdef CONFIG_DFU_OVER_TFTP
diff --git a/common/dfu.c b/common/dfu.c
index 44d1484d3d..da6289b218 100644
--- a/common/dfu.c
+++ b/common/dfu.c
@@ -35,6 +35,10 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget)
 		return CMD_RET_FAILURE;
 	}
 
+#ifdef CONFIG_DFU_TIMEOUT
+	unsigned long start_time = get_timer(0);
+#endif
+
 	while (1) {
 		if (g_dnl_detach()) {
 			/*
@@ -79,6 +83,19 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget)
 			}
 		}
 
+#ifdef CONFIG_DFU_TIMEOUT
+		unsigned long wait_time = dfu_get_timeout();
+
+		if (wait_time) {
+			unsigned long current_time = get_timer(start_time);
+
+			if (current_time > wait_time) {
+				debug("Inactivity timeout, abort DFU\n");
+				goto exit;
+			}
+		}
+#endif
+
 		WATCHDOG_RESET();
 		usb_gadget_handle_interrupts(usbctrl_index);
 	}
diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index 9fe5bc0f58..e070130b5a 100644
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -23,6 +23,12 @@ config DFU_TFTP
 
 	  Detailed description of this feature can be found at ./doc/README.dfutftp
 
+config DFU_TIMEOUT
+	bool "Timeout waiting for DFU"
+	help
+	  This option adds an optional timeout parameter for DFU which, if set,
+	  will cause DFU to only wait for that many seconds before exiting.
+
 config DFU_MMC
 	bool "MMC back end for DFU"
 	help
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 38aecd3a05..df50196dfd 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -21,6 +21,9 @@ static LIST_HEAD(dfu_list);
 static int dfu_alt_num;
 static int alt_num_cnt;
 static struct hash_algo *dfu_hash_algo;
+#ifdef CONFIG_DFU_TIMEOUT
+static unsigned long dfu_timeout = 0;
+#endif
 
 /*
  * The purpose of the dfu_flush_callback() function is to
@@ -58,6 +61,18 @@ __weak bool dfu_usb_get_reset(void)
 #endif
 }
 
+#ifdef CONFIG_DFU_TIMEOUT
+void dfu_set_timeout(unsigned long timeout)
+{
+	dfu_timeout = timeout;
+}
+
+unsigned long dfu_get_timeout(void)
+{
+	return dfu_timeout;
+}
+#endif
+
 static int dfu_find_alt_num(const char *s)
 {
 	int i = 0;
diff --git a/include/dfu.h b/include/dfu.h
index 2e3e91c8d2..fb5260d903 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -178,6 +178,11 @@ unsigned char *dfu_free_buf(void);
 unsigned long dfu_get_buf_size(void);
 bool dfu_usb_get_reset(void);
 
+#ifdef CONFIG_DFU_TIMEOUT
+unsigned long dfu_get_timeout(void);
+void dfu_set_timeout(unsigned long);
+#endif
+
 int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
-- 
2.24.0