From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [libgpiod] [PATCH 07/19] bindings: cxx: add support for bias flags
Date: Fri, 15 Nov 2019 22:43:43 +0800 [thread overview]
Message-ID: <20191115144355.975-8-warthog618@gmail.com> (raw)
In-Reply-To: <20191115144355.975-1-warthog618@gmail.com>
Add support for bias flags in line requests and returning the line bias
setting via a bias accessor.
Based on initial work by Drew Fustini <drew@pdp7.com>.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
bindings/cxx/gpiod.hpp | 26 ++++++++++++++++++++++++++
bindings/cxx/line.cpp | 19 +++++++++++++++++++
bindings/cxx/line_bulk.cpp | 6 ++++++
3 files changed, 51 insertions(+)
diff --git a/bindings/cxx/gpiod.hpp b/bindings/cxx/gpiod.hpp
index b5a9401..2b1a6ab 100644
--- a/bindings/cxx/gpiod.hpp
+++ b/bindings/cxx/gpiod.hpp
@@ -233,6 +233,12 @@ struct line_request
/**< The line is an open-source port. */
GPIOD_API static const ::std::bitset<32> FLAG_OPEN_DRAIN;
/**< The line is an open-drain port. */
+ GPIOD_API static const ::std::bitset<32> FLAG_BIAS_DISABLE;
+ /**< The line has neither pull-up nor pull-down resistor enabled */
+ GPIOD_API static const ::std::bitset<32> FLAG_BIAS_PULL_DOWN;
+ /**< The line has a configurable pull-down resistor enabled */
+ GPIOD_API static const ::std::bitset<32> FLAG_BIAS_PULL_UP;
+ /**< The line has a configurable pull-up resistor enabled */
::std::string consumer;
/**< Consumer name to pass to the request. */
@@ -320,6 +326,12 @@ public:
*/
GPIOD_API int active_state(void) const;
+ /**
+ * @brief Get current bias of this line.
+ * @return Current bias setting.
+ */
+ GPIOD_API int bias(void) const;
+
/**
* @brief Check if this line is used by the kernel or other user space
* process.
@@ -456,6 +468,20 @@ public:
/**< Line's active state is high. */
};
+ /**
+ * @brief Possible bias settings.
+ */
+ enum : int {
+ BIAS_AS_IS = 1,
+ /**< Line's bias state is unknown. */
+ BIAS_DISABLE,
+ /**< Line's internal bias is disabled. */
+ BIAS_PULL_UP,
+ /**< Line's internal pull-up bias is enabled. */
+ BIAS_PULL_DOWN,
+ /**< Line's internal pull-down bias is enabled. */
+ };
+
private:
line(::gpiod_line* line, const chip& owner);
diff --git a/bindings/cxx/line.cpp b/bindings/cxx/line.cpp
index df6eada..dd6bb6a 100644
--- a/bindings/cxx/line.cpp
+++ b/bindings/cxx/line.cpp
@@ -67,6 +67,25 @@ int line::active_state(void) const
return active == GPIOD_LINE_ACTIVE_STATE_HIGH ? ACTIVE_HIGH : ACTIVE_LOW;
}
+int line::bias(void) const
+{
+ this->throw_if_null();
+
+ int bias = ::gpiod_line_bias(this->_m_line);
+
+ switch (bias) {
+ case GPIOD_LINE_BIAS_PULL_UP:
+ return BIAS_PULL_UP;
+ case GPIOD_LINE_BIAS_PULL_DOWN:
+ return BIAS_PULL_DOWN;
+ case GPIOD_LINE_BIAS_DISABLE:
+ return BIAS_DISABLE;
+ case GPIOD_LINE_BIAS_AS_IS:
+ default:
+ return BIAS_AS_IS;
+ }
+}
+
bool line::is_used(void) const
{
this->throw_if_null();
diff --git a/bindings/cxx/line_bulk.cpp b/bindings/cxx/line_bulk.cpp
index c708c8b..5f1cac4 100644
--- a/bindings/cxx/line_bulk.cpp
+++ b/bindings/cxx/line_bulk.cpp
@@ -14,6 +14,9 @@ namespace gpiod {
const ::std::bitset<32> line_request::FLAG_ACTIVE_LOW(GPIOD_BIT(0));
const ::std::bitset<32> line_request::FLAG_OPEN_SOURCE(GPIOD_BIT(1));
const ::std::bitset<32> line_request::FLAG_OPEN_DRAIN(GPIOD_BIT(2));
+const ::std::bitset<32> line_request::FLAG_BIAS_DISABLE(GPIOD_BIT(3));
+const ::std::bitset<32> line_request::FLAG_BIAS_PULL_DOWN(GPIOD_BIT(4));
+const ::std::bitset<32> line_request::FLAG_BIAS_PULL_UP(GPIOD_BIT(5));
namespace {
@@ -38,6 +41,9 @@ const ::std::map<::std::bitset<32>, int, bitset_cmp> reqflag_mapping = {
{ line_request::FLAG_ACTIVE_LOW, GPIOD_LINE_REQUEST_FLAG_ACTIVE_LOW, },
{ line_request::FLAG_OPEN_DRAIN, GPIOD_LINE_REQUEST_FLAG_OPEN_DRAIN, },
{ line_request::FLAG_OPEN_SOURCE, GPIOD_LINE_REQUEST_FLAG_OPEN_SOURCE, },
+ { line_request::FLAG_BIAS_DISABLE, GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE, },
+ { line_request::FLAG_BIAS_PULL_DOWN, GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN, },
+ { line_request::FLAG_BIAS_PULL_UP, GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP, },
};
} /* namespace */
--
2.24.0
next prev parent reply other threads:[~2019-11-15 14:45 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-15 14:43 [libgpiod] [PATCH 00/19] Add support for bias flags and SET_CONFIG Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 01/19] core: move request flag to handle flag conversion into a separate function Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 02/19] API: add support for bias flags Kent Gibson
2019-11-18 13:51 ` Bartosz Golaszewski
2019-11-18 14:12 ` Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 03/19] core: fix misspelling of parameter Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 04/19] tests: add tests for bias flags Kent Gibson
2019-11-18 13:51 ` Bartosz Golaszewski
2019-11-18 14:14 ` Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 05/19] bindings: cxx: drop noexcept from direction and active_state Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 06/19] bindings: cxx: initialise bitset with integer instead of string Kent Gibson
2019-11-18 13:51 ` Bartosz Golaszewski
2019-11-18 14:17 ` Kent Gibson
2019-11-15 14:43 ` Kent Gibson [this message]
2019-11-15 14:43 ` [libgpiod] [PATCH 08/19] bindings: cxx: tests: add tests for bias flags Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 09/19] bindings: python: add support " Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 10/19] bindings: python: tests: add tests " Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 11/19] API: add support for SET_CONFIG Kent Gibson
2019-11-18 13:52 ` Bartosz Golaszewski
2019-11-18 14:48 ` Kent Gibson
2019-11-19 15:52 ` Kent Gibson
2019-11-20 11:00 ` Bartosz Golaszewski
2019-11-20 13:58 ` Kent Gibson
2019-11-20 14:08 ` Bartosz Golaszewski
2019-11-20 14:13 ` Kent Gibson
2019-11-20 14:18 ` Bartosz Golaszewski
2019-11-20 14:36 ` Kent Gibson
2019-11-20 15:18 ` Bartosz Golaszewski
2019-11-21 0:34 ` Kent Gibson
2019-11-21 7:13 ` Bartosz Golaszewski
2019-11-21 7:46 ` Kent Gibson
2019-11-21 8:46 ` Bartosz Golaszewski
2019-11-21 9:30 ` Kent Gibson
2019-11-21 10:03 ` Bartosz Golaszewski
2019-11-21 10:18 ` Kent Gibson
2019-11-21 10:27 ` Bartosz Golaszewski
2019-11-21 10:31 ` Bartosz Golaszewski
2019-11-21 11:07 ` Kent Gibson
2019-11-21 15:22 ` Bartosz Golaszewski
2019-11-21 10:59 ` Kent Gibson
2019-11-21 15:20 ` Bartosz Golaszewski
2019-11-15 14:43 ` [libgpiod] [PATCH 12/19] tests: add tests " Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 13/19] core: allow gpiod_line_set_value_bulk to accept null values Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 14/19] bindings: cxx: add support for SET_CONFIG Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 15/19] bindings: cxx: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 16/19] bindings: python: add support for SET_CONFIG Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 17/19] bindings: python: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 18/19] tools: add support for bias flags Kent Gibson
2019-11-16 15:40 ` Kent Gibson
2019-11-17 12:18 ` Bartosz Golaszewski
2019-11-17 12:28 ` Kent Gibson
2019-11-17 13:12 ` Kent Gibson
2019-11-15 14:43 ` [libgpiod] [PATCH 19/19] treewide: change "correspond with" to "correspond to" Kent Gibson
2019-11-18 13:52 ` Bartosz Golaszewski
2019-11-18 15:01 ` Kent Gibson
2019-11-18 13:50 ` [libgpiod] [PATCH 00/19] Add support for bias flags and SET_CONFIG Bartosz Golaszewski
2019-11-18 14:09 ` Kent Gibson
2019-11-18 14:55 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191115144355.975-8-warthog618@gmail.com \
--to=warthog618@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.