Re: [dpdk-dev] [PATCH v4] net/ice: add flow mark hint support

[Ye Xiaolong <xiaolong.ye@intel.com>]

On 11/19, Qi Zhang wrote:
>Since not all data paths support flow mark, the driver needs
>a hint from application to select the correct data path if
>flow mark is required. The patch introduces a devarg
>"flow-mark-support" as a workaround solution, since a standard
>way is still ongoing.
>
>Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
>Acked-by: Qiming Yang <qiming.yang@intel.com>
>---
>
>v4:
>- remove debug code, fix typos
>
>v3:
>- add "experimental notification" in ice.rst
>
>v2:
>- fix typos
>
> doc/guides/nics/ice.rst               | 12 ++++++++++++
> drivers/net/ice/ice_ethdev.c          | 12 +++++++++++-
> drivers/net/ice/ice_ethdev.h          |  1 +
> drivers/net/ice/ice_rxtx_vec_common.h |  6 ++++++
> 4 files changed, 30 insertions(+), 1 deletion(-)
>
>diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
>index 7ff33d7f0..652620d16 100644
>--- a/doc/guides/nics/ice.rst
>+++ b/doc/guides/nics/ice.rst
>@@ -98,6 +98,18 @@ Runtime Config Options
> 
>     -w 80:00.0,pipeline-mode-support=1
> 
>+- ``Flow Mark Support`` (default ``0``)
>+
>+  This is a hint to the driver to select the data path that supports flow mark extraction
>+  by default.
>+  NOTE: This is an experimental devarg, it will be removed when any of below conditions
>+  is ready.
>+  1) all data paths support flow mark (currently vPMD does not)
>+  2) a new offload like RTE_DEV_RX_OFFLOAD_FLOW_MARK be introduced as a standard way to hint.
>+  Example::
>+
>+    -w 80:00.0,flow-mark-support=1
>+
> - ``Protocol extraction for per queue``
> 
>   Configure the RX queues to do protocol extraction into mbuf for protocol
>diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
>index ecfc6c9e8..de189daba 100644
>--- a/drivers/net/ice/ice_ethdev.c
>+++ b/drivers/net/ice/ice_ethdev.c
>@@ -23,11 +23,13 @@
> /* devargs */
> #define ICE_SAFE_MODE_SUPPORT_ARG "safe-mode-support"
> #define ICE_PIPELINE_MODE_SUPPORT_ARG  "pipeline-mode-support"
>+#define ICE_FLOW_MARK_SUPPORT_ARG	"flow-mark-support"
> #define ICE_PROTO_XTR_ARG         "proto_xtr"
> 
> static const char * const ice_valid_args[] = {
> 	ICE_SAFE_MODE_SUPPORT_ARG,
> 	ICE_PIPELINE_MODE_SUPPORT_ARG,
>+	ICE_FLOW_MARK_SUPPORT_ARG,
> 	ICE_PROTO_XTR_ARG,
> 	NULL
> };
>@@ -1987,6 +1989,13 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
> 
> 	ret = rte_kvargs_process(kvlist, ICE_PIPELINE_MODE_SUPPORT_ARG,
> 				 &parse_bool, &ad->devargs.pipe_mode_support);
>+	if (ret)
>+		goto bail;
>+
>+	ret = rte_kvargs_process(kvlist, ICE_FLOW_MARK_SUPPORT_ARG,
>+				 &parse_bool, &ad->devargs.flow_mark_support);
>+	if (ret)
>+		goto bail;
> 
> bail:
> 	rte_kvargs_free(kvlist);
>@@ -4562,7 +4571,8 @@ RTE_PMD_REGISTER_KMOD_DEP(net_ice, "* igb_uio | uio_pci_generic | vfio-pci");
> RTE_PMD_REGISTER_PARAM_STRING(net_ice,
> 			      ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp>"
> 			      ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
>-			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
>+			      ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
>+			      ICE_FLOW_MARK_SUPPORT_ARG "=<0|1>");
> 
> RTE_INIT(ice_init_log)
> {
>diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
>index 510f6869d..f2186e1ff 100644
>--- a/drivers/net/ice/ice_ethdev.h
>+++ b/drivers/net/ice/ice_ethdev.h
>@@ -391,6 +391,7 @@ struct ice_devargs {
> 	int safe_mode_support;
> 	uint8_t proto_xtr_dflt;
> 	int pipe_mode_support;
>+	int flow_mark_support;
> 	uint8_t proto_xtr[ICE_MAX_QUEUE_NUM];
> };
> 
>diff --git a/drivers/net/ice/ice_rxtx_vec_common.h b/drivers/net/ice/ice_rxtx_vec_common.h
>index 080ca4175..5e6f89642 100644
>--- a/drivers/net/ice/ice_rxtx_vec_common.h
>+++ b/drivers/net/ice/ice_rxtx_vec_common.h
>@@ -268,6 +268,12 @@ ice_rx_vec_dev_check_default(struct rte_eth_dev *dev)
> {
> 	int i;
> 	struct ice_rx_queue *rxq;
>+	struct ice_adapter *ad =
>+		ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
>+
>+	/* vPMD does not support flow mark. */
>+	if (ad->devargs.flow_mark_support)
>+		return -1;
> 
> 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
> 		rxq = dev->data->rx_queues[i];
>-- 
>2.13.6
>

Applied to dpdk-next-net-intel, Thanks.