From: Fredrik Noring <noring@nocrew.org>
To: Christoph Hellwig <hch@lst.de>, linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH] USB: Fix incorrect DMA allocations for local memory pool drivers
Date: Sat, 30 Nov 2019 17:50:55 +0100 [thread overview]
Message-ID: <20191130165055.GA46622@sx9> (raw)
Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of
guestimating DMA capabilities") where local memory USB drivers
erroneously allocate DMA memory instead of pool memory, causing
OHCI Unrecoverable Error, disabled
HC died; cleaning up
The order between hcd_uses_dma() and hcd->localmem_pool is now
arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the
test for hcd->localmem_pool placed first.
As an alternative, one might consider adjusting hcd_uses_dma() with
static inline bool hcd_uses_dma(struct usb_hcd *hcd)
{
- return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
+ return IS_ENABLED(CONFIG_HAS_DMA) &&
+ (hcd->driver->flags & HCD_DMA) &&
+ (hcd->localmem_pool == NULL);
}
One can also consider unsetting HCD_DMA for local memory pool drivers.
Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") where local memory USB drivers
Signed-off-by: Fredrik Noring <noring@nocrew.org>
---
drivers/usb/core/hcd.c | 42 +++++++++++++++++-----------------
drivers/usb/storage/scsiglue.c | 3 ++-
2 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f225eaa98ff8..d0f45600b669 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1409,7 +1409,17 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
if (hcd->self.uses_pio_for_control)
return ret;
- if (hcd_uses_dma(hcd)) {
+ if (hcd->localmem_pool) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ if (ret)
+ return ret;
+ urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+ } else if (hcd_uses_dma(hcd)) {
if (is_vmalloc_addr(urb->setup_packet)) {
WARN_ONCE(1, "setup packet is not dma capable\n");
return -EAGAIN;
@@ -1427,23 +1437,22 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
urb->setup_dma))
return -EAGAIN;
urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
- } else if (hcd->localmem_pool) {
- ret = hcd_alloc_coherent(
- urb->dev->bus, mem_flags,
- &urb->setup_dma,
- (void **)&urb->setup_packet,
- sizeof(struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (ret)
- return ret;
- urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
}
}
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
if (urb->transfer_buffer_length != 0
&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
- if (hcd_uses_dma(hcd)) {
+ if (hcd->localmem_pool) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
+ if (ret == 0)
+ urb->transfer_flags |= URB_MAP_LOCAL;
+ } else if (hcd_uses_dma(hcd)) {
if (urb->num_sgs) {
int n;
@@ -1497,15 +1506,6 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
else
urb->transfer_flags |= URB_DMA_MAP_SINGLE;
}
- } else if (hcd->localmem_pool) {
- ret = hcd_alloc_coherent(
- urb->dev->bus, mem_flags,
- &urb->transfer_dma,
- &urb->transfer_buffer,
- urb->transfer_buffer_length,
- dir);
- if (ret == 0)
- urb->transfer_flags |= URB_MAP_LOCAL;
}
if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
URB_SETUP_MAP_LOCAL)))
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 54a3c8195c96..2adcabe060c5 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,7 +135,8 @@ static int slave_configure(struct scsi_device *sdev)
* For such controllers we need to make sure the block layer sets
* up bounce buffers in addressable memory.
*/
- if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)))
+ if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+ (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
/*
--
2.23.0
next reply other threads:[~2019-11-30 16:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-30 16:50 Fredrik Noring [this message]
2019-12-03 7:39 ` [PATCH] USB: Fix incorrect DMA allocations for local memory pool drivers Christoph Hellwig
2019-12-03 16:54 ` Fredrik Noring
2019-12-03 8:12 ` Johan Hovold
2019-12-03 16:55 ` Fredrik Noring
2019-12-10 11:22 ` Greg Kroah-Hartman
2019-12-10 17:29 ` [PATCH v2] " Fredrik Noring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191130165055.GA46622@sx9 \
--to=noring@nocrew.org \
--cc=gregkh@linuxfoundation.org \
--cc=hch@lst.de \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.