All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: lorenzo.bianconi@redhat.com, linux-iio@vger.kernel.org, sean@geanix.com
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
Date: Sun, 1 Dec 2019 21:20:25 +0000	[thread overview]
Message-ID: <20191201212025.1c7dc713@archlinux> (raw)
In-Reply-To: <20191201210727.GB11638@localhost.localdomain>

On Sun, 1 Dec 2019 23:07:27 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> > On Fri, 29 Nov 2019 11:37:24 +0200
> > Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> >   
> > > Do not power-off accel unconditionally if wake-up events are enabled
> > > powering off the hw FIFO. At the same time do not power-off the accel
> > > sensor if it is 'batched' in the hw FIFO disabling sensor events
> > > 
> > > Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events")
> > > Tested-by: Sean Nyekjaer <sean@geanix.com>
> > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>  
> > Not applied as this seems to be dependent on one of the earlier patches.
> > Please put them in a series and resend.  
> 
> Hi Jonathan,
> 
> Sorry for the noise, but I discovered the issue after I have already sent
> the other patch out. I will post them together in v2.
I've picked it up given I now have the other one anyway.

Applied to the fixes-togreg branch of iio.git

Thanks,

Jonathan

> 
> Regards,
> Lorenzo
> 
> > 
> > Thanks,
> > 
> > Jonathan  
> > > ---
> > > This patch is based on https://patchwork.kernel.org/patch/11266301/
> > > ---
> > >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 30 +++++++++++++++++---
> > >  1 file changed, 26 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > index 13590c041d22..990643da9f4e 100644
> > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > @@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
> > >  	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> > >  }
> > >  
> > > -int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > > -				 bool enable)
> > > +static int
> > > +__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > > +			       bool enable)
> > >  {
> > >  	struct st_lsm6dsx_hw *hw = sensor->hw;
> > >  	u32 odr = enable ? sensor->odr : 0;
> > > @@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > >  	return 0;
> > >  }
> > >  
> > > +static int
> > > +st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
> > > +{
> > > +	struct st_lsm6dsx_hw *hw = sensor->hw;
> > > +
> > > +	if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
> > > +		return 0;
> > > +
> > > +	return hw->enable_event;
> > > +}
> > > +
> > > +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
> > > +				 bool enable)
> > > +{
> > > +	if (st_lsm6dsx_check_events(sensor, enable))
> > > +		return 0;
> > > +
> > > +	return __st_lsm6dsx_sensor_set_enable(sensor, enable);
> > > +}
> > > +
> > >  static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
> > >  				   u8 addr, int *val)
> > >  {
> > > @@ -1662,7 +1683,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> > >  	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
> > >  	struct st_lsm6dsx_hw *hw = sensor->hw;
> > >  	u8 enable_event;
> > > -	int err = 0;
> > > +	int err;
> > >  
> > >  	if (type != IIO_EV_TYPE_THRESH)
> > >  		return -EINVAL;
> > > @@ -1690,7 +1711,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
> > >  		return err;
> > >  
> > >  	mutex_lock(&hw->conf_lock);
> > > -	err = st_lsm6dsx_sensor_set_enable(sensor, state);
> > > +	if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
> > > +		err = __st_lsm6dsx_sensor_set_enable(sensor, state);
> > >  	mutex_unlock(&hw->conf_lock);
> > >  	if (err < 0)
> > >  		return err;  
> >   


      reply	other threads:[~2019-12-01 21:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29  9:37 [PATCH] iio: imu: st_lsm6dsx: do not power-off accel if events are enabled Lorenzo Bianconi
2019-12-01 21:01 ` Jonathan Cameron
2019-12-01 21:07   ` Lorenzo Bianconi
2019-12-01 21:20     ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191201212025.1c7dc713@archlinux \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=lorenzo@kernel.org \
    --cc=sean@geanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.