From: Joris Offouga <offougajoris@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH] pico-imx7d: Convert to DM_ETH
Date: Sun, 8 Dec 2019 18:02:29 +0100 [thread overview]
Message-ID: <20191208170232.24803-2-offougajoris@gmail.com> (raw)
In-Reply-To: <20191208170232.24803-1-offougajoris@gmail.com>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
---
board/technexion/pico-imx7d/pico-imx7d.c | 46 ------------------------
configs/pico-dwarf-imx7d_defconfig | 5 +++
configs/pico-hobbit-imx7d_defconfig | 5 +++
configs/pico-imx7d_bl33_defconfig | 5 +++
configs/pico-imx7d_defconfig | 5 +++
configs/pico-nymph-imx7d_defconfig | 5 +++
configs/pico-pi-imx7d_defconfig | 5 +++
include/configs/pico-imx7d.h | 11 ------
8 files changed, 30 insertions(+), 57 deletions(-)
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index bcfc7d361e..b7ca2e1315 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -16,7 +16,6 @@
#include <common.h>
#include <i2c.h>
#include <miiphy.h>
-#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
#include "../../freescale/common/pfuze.h"
@@ -26,11 +25,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \
PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
-#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM)
-
-#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
-
#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
@@ -123,44 +117,6 @@ static iomux_v3_cfg_t const uart5_pads[] = {
};
#ifdef CONFIG_FEC_MXC
-static iomux_v3_cfg_t const fec1_pads[] = {
- MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX7D_PAD_SD3_STROBE__GPIO6_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-#define FEC1_RST_GPIO IMX_GPIO_NR(6, 11)
-
-static void setup_iomux_fec(void)
-{
- imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
- gpio_request(FEC1_RST_GPIO, "phy_rst");
- gpio_direction_output(FEC1_RST_GPIO, 0);
- udelay(500);
- gpio_set_value(FEC1_RST_GPIO, 1);
-}
-
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_fec();
-
- return fecmxc_initialize_multi(bis, 0,
- CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
-}
-
static int setup_fec(void)
{
struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
@@ -235,9 +191,7 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_DM_VIDEO
-
setup_lcd();
-
#endif
#ifdef CONFIG_FEC_MXC
setup_fec();
diff --git a/configs/pico-dwarf-imx7d_defconfig b/configs/pico-dwarf-imx7d_defconfig
index 94d73ee051..2437a64dd0 100644
--- a/configs/pico-dwarf-imx7d_defconfig
+++ b/configs/pico-dwarf-imx7d_defconfig
@@ -59,6 +59,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
index ef86b0cd66..3467d4c2e4 100644
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@@ -59,6 +59,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig
index 51d3514072..49a4e1b0c1 100644
--- a/configs/pico-imx7d_bl33_defconfig
+++ b/configs/pico-imx7d_bl33_defconfig
@@ -50,6 +50,11 @@ CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
index bf4d56ec2c..a1975b9d56 100644
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@@ -59,6 +59,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig
index 94d73ee051..2437a64dd0 100644
--- a/configs/pico-nymph-imx7d_defconfig
+++ b/configs/pico-nymph-imx7d_defconfig
@@ -59,6 +59,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index c6f5b872c3..f1e439602b 100644
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@@ -59,6 +59,11 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 1d0df9dd44..4dc206566e 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -29,17 +29,6 @@
#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-
-#define CONFIG_PHY_ATHEROS
-
-/* ENET1 */
-#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
-
/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
--
2.20.1
next prev parent reply other threads:[~2019-12-08 17:02 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 17:02 [PATCH 1/3] mx7dsabre: Remove warning about DM_SPI_FLASH Joris Offouga
2019-12-08 17:02 ` Joris Offouga [this message]
2019-12-08 17:44 ` [PATCH] pico-imx7d: Convert to DM_ETH Otavio Salvador
2019-12-28 10:49 ` sbabic at denx.de
2019-12-28 11:31 ` Stefano Babic
2020-01-04 12:03 ` Joris Offouga
2020-01-05 10:31 ` Stefano Babic
2020-01-05 17:36 ` Otavio Salvador
2019-12-08 17:02 ` [PATCH 2/3] mx7dsabre: Enable DM_ETH Joris Offouga
2019-12-29 10:27 ` sbabic at denx.de
2020-01-20 18:48 ` Fabio Estevam
2020-01-20 20:20 ` Joris Offouga
2020-01-20 20:22 ` Fabio Estevam
2020-01-20 20:26 ` Joris Offouga
2020-01-20 20:28 ` Fabio Estevam
2020-01-20 20:32 ` Joris Offouga
2020-01-20 20:37 ` Fabio Estevam
2020-01-27 15:57 ` Fabio Estevam
2020-01-27 16:16 ` Joris OFFOUGA
2020-01-27 17:57 ` Fabio Estevam
2020-01-27 18:31 ` Fabio Estevam
2020-01-29 14:43 ` Fabio Estevam
2020-01-29 14:48 ` Joris OFFOUGA
2019-12-08 17:02 ` [PATCH 3/3] mx7dsabre: Convert to distroboot support Joris Offouga
2019-12-29 10:25 ` sbabic at denx.de
2019-12-29 10:25 ` [PATCH 1/3] mx7dsabre: Remove warning about DM_SPI_FLASH sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191208170232.24803-2-offougajoris@gmail.com \
--to=offougajoris@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.