From: ruantu <mtwget@gmail.com>
To: jic23@kernel.org
Cc: mtwget@gmail.com, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
Date: Tue, 10 Dec 2019 13:37:44 +0800 [thread overview]
Message-ID: <20191210053744.732093-1-mtwget@gmail.com> (raw)
Dynament Premier series single gas sensor.
Signed-off-by: ruantu <mtwget@gmail.com>
---
.../iio/chemical/dynament,premier.yaml | 43 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 1 +
3 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml
diff --git a/Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml b/Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml
new file mode 100644
index 000000000000..076ae9d90cee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/dynament,premier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dynament Premier series single gas sensor
+
+maintainers:
+ - ruantu <mtwget@gmail.com>
+
+description: |
+ single gas sensor capable of measuring gas concentration of dust
+ particles, multi-gas sensor are not supported.
+
+ Specifications about the sensor can be found at:
+ https://www.dynament.com/_webedit/uploaded-files/All%20Files/SIL%20Data/tds0045_1.44.pdf, read chapter 1.5.2 Read live data simple
+
+properties:
+ compatible:
+ enum:
+ - dynament,premier
+
+ vcc-supply:
+ description: regulator that provides power to the sensor
+
+ reset-gpios:
+ description: GPIO connected to the RESET line
+ maxItems: 1
+
+required:
+ - compatible
+
+examples:
+ - |
+ serial {
+ single-gas-sensor {
+ compatible = "dynament,premier";
+ vcc-supply = <®_vcc5v0>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6046f4555852..5afca0586c41 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -261,6 +261,8 @@ patternProperties:
description: Dragino Technology Co., Limited
"^dserve,.*":
description: dServe Technology B.V.
+ "^dynament,.*":
+ description: Dynament, Ltd.
"^ea,.*":
description: Embedded Artists AB
"^ebs-systart,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index 18c26558ddfe..84592789e01b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13137,6 +13137,7 @@ DYNAMENT PREMIER SERIES SINGLE GAS SENSOR DRIVER
M: ruantu <mtwget@gmail.com>
S: Maintained
F: drivers/iio/chemical/premier.c
+F: Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml
PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
M: Tomasz Duszynski <tduszyns@gmail.com>
--
2.24.0
next reply other threads:[~2019-12-10 5:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 5:37 ruantu [this message]
2019-12-15 17:19 ` [PATCH 2/2] dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210053744.732093-1-mtwget@gmail.com \
--to=mtwget@gmail.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.