[PATCH 1/4] USB: atm: ueagle-atm: add missing endpoint check

[Johan Hovold <johan@kernel.org>]

Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.

The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.

Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/atm/ueagle-atm.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 8b0ea8c70d73..635cf0466b59 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2124,10 +2124,11 @@ static void uea_intr(struct urb *urb)
 /*
  * Start the modem : init the data and start kernel thread
  */
-static int uea_boot(struct uea_softc *sc)
+static int uea_boot(struct uea_softc *sc, struct usb_interface *intf)
 {
-	int ret, size;
 	struct intr_pkt *intr;
+	int ret = -ENOMEM;
+	int size;
 
 	uea_enters(INS_TO_USBDEV(sc));
 
@@ -2152,6 +2153,11 @@ static int uea_boot(struct uea_softc *sc)
 	if (UEA_CHIP_VERSION(sc) == ADI930)
 		load_XILINX_firmware(sc);
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+		ret = -ENODEV;
+		goto err0;
+	}
+
 	intr = kmalloc(size, GFP_KERNEL);
 	if (!intr)
 		goto err0;
@@ -2163,8 +2169,7 @@ static int uea_boot(struct uea_softc *sc)
 	usb_fill_int_urb(sc->urb_int, sc->usb_dev,
 			 usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
 			 intr, size, uea_intr, sc,
-			 sc->usb_dev->actconfig->interface[0]->altsetting[0].
-			 endpoint[0].desc.bInterval);
+			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
 	if (ret < 0) {
@@ -2179,6 +2184,7 @@ static int uea_boot(struct uea_softc *sc)
 	sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
 	if (IS_ERR(sc->kthread)) {
 		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+		ret = PTR_ERR(sc->kthread);
 		goto err2;
 	}
 
@@ -2193,7 +2199,7 @@ static int uea_boot(struct uea_softc *sc)
 	kfree(intr);
 err0:
 	uea_leaves(INS_TO_USBDEV(sc));
-	return -ENOMEM;
+	return ret;
 }
 
 /*
@@ -2548,7 +2554,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 		}
 	}
 
-	ret = uea_boot(sc);
+	ret = uea_boot(sc, intf);
 	if (ret < 0)
 		goto error;
 
-- 
2.24.0