From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 1/2] staging: rtl8188eu: cleanup comparsions to NULL in rtw_mlme_ext.c
Date: Sat, 14 Dec 2019 11:09:54 +0100 [thread overview]
Message-ID: <20191214100955.16670-1-straube.linux@gmail.com> (raw)
Cleanup comparsions to NULL reported by checkpatch.
if (x == NULL) -> if (!x)
if (x != NULL) -> if (x)
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c | 38 +++++++++----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
index e984b4605e91..e122ef165085 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
@@ -751,7 +751,7 @@ static void issue_auth(struct adapter *padapter, struct sta_info *psta,
struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network;
pmgntframe = alloc_mgtxmitframe(pxmitpriv);
- if (pmgntframe == NULL)
+ if (!pmgntframe)
return;
/* update attribute */
@@ -980,7 +980,7 @@ static void issue_asocrsp(struct adapter *padapter, unsigned short status,
break;
}
- if ((pbuf == NULL) || (ie_len == 0))
+ if (!pbuf || ie_len == 0)
break;
}
}
@@ -1120,7 +1120,7 @@ static void issue_assocreq(struct adapter *padapter)
/* HT caps */
if (padapter->mlmepriv.htpriv.ht_option) {
p = rtw_get_ie((pmlmeinfo->network.ies + sizeof(struct ndis_802_11_fixed_ie)), _HT_CAPABILITY_IE_, &ie_len, (pmlmeinfo->network.ie_length - sizeof(struct ndis_802_11_fixed_ie)));
- if ((p != NULL) && (!(is_ap_in_tkip(padapter)))) {
+ if (p && !is_ap_in_tkip(padapter)) {
memcpy(&pmlmeinfo->HT_caps, p + 2, sizeof(struct ieee80211_ht_cap));
/* to disable 40M Hz support while gd_bw_40MHz_en = 0 */
@@ -1263,7 +1263,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da,
struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network;
/* da == NULL, assume it's null data for sta to ap*/
- if (da == NULL)
+ if (!da)
da = pnetwork->MacAddress;
do {
@@ -1392,7 +1392,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da,
struct wlan_bssid_ex *pnetwork = &pmlmeinfo->network;
/* da == NULL, assume it's null data for sta to ap*/
- if (da == NULL)
+ if (!da)
da = pnetwork->MacAddress;
do {
@@ -1444,7 +1444,7 @@ static int _issue_deauth(struct adapter *padapter, unsigned char *da,
__le16 le_tmp;
pmgntframe = alloc_mgtxmitframe(pxmitpriv);
- if (pmgntframe == NULL)
+ if (!pmgntframe)
goto exit;
/* update attribute */
@@ -1780,7 +1780,7 @@ static void issue_action_BSSCoexistPacket(struct adapter *padapter)
pbss_network = (struct wlan_bssid_ex *)&pnetwork->network;
p = rtw_get_ie(pbss_network->ies + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, pbss_network->ie_length - _FIXED_IE_LENGTH_);
- if ((p == NULL) || (len == 0)) { /* non-HT */
+ if (!p || len == 0) { /* non-HT */
if ((pbss_network->Configuration.DSConfig <= 0) || (pbss_network->Configuration.DSConfig > 14))
continue;
@@ -1833,7 +1833,7 @@ unsigned int send_delba(struct adapter *padapter, u8 initiator, u8 *addr)
return _SUCCESS;
psta = rtw_get_stainfo(pstapriv, addr);
- if (psta == NULL)
+ if (!psta)
return _SUCCESS;
if (initiator == 0) { /* recipient */
@@ -2082,7 +2082,7 @@ static u8 collect_bss_info(struct adapter *padapter,
/* checking rate info... */
i = 0;
p = rtw_get_ie(bssid->ies + ie_offset, _SUPPORTEDRATES_IE_, &len, bssid->ie_length - ie_offset);
- if (p != NULL) {
+ if (p) {
if (len > NDIS_802_11_LENGTH_RATES_EX) {
DBG_88E("%s()-%d: IE too long (%d) for survey event\n", __func__, __LINE__, len);
return _FAIL;
@@ -2596,7 +2596,7 @@ static unsigned int OnBeacon(struct adapter *padapter,
if (((pmlmeinfo->state & 0x03) == WIFI_FW_STATION_STATE) && (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) {
psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
- if (psta != NULL) {
+ if (psta) {
ret = rtw_check_bcn_info(padapter, pframe, len);
if (!ret) {
DBG_88E_LEVEL(_drv_info_, "ap has changed, disconnect now\n ");
@@ -2610,7 +2610,7 @@ static unsigned int OnBeacon(struct adapter *padapter,
}
} else if ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) {
psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
- if (psta != NULL) {
+ if (psta) {
/* update WMM, ERP in the beacon */
/* todo: the timer is used instead of the number of the beacon received */
if ((sta_rx_pkts(psta) & 0xf) == 0)
@@ -2761,7 +2761,7 @@ static unsigned int OnAuth(struct adapter *padapter,
p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + 4 + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, &ie_len,
len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_ - 4);
- if ((p == NULL) || (ie_len <= 0)) {
+ if (!p || ie_len <= 0) {
DBG_88E("auth rejected because challenge failure!(1)\n");
status = _STATS_CHALLENGE_FAIL_;
goto auth_fail;
@@ -2855,7 +2855,7 @@ static unsigned int OnAuthClient(struct adapter *padapter,
p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, &len,
pkt_len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_);
- if (p == NULL)
+ if (!p)
goto authclnt_fail;
memcpy((void *)(pmlmeinfo->chg_txt), (void *)(p + 2), len);
@@ -2987,7 +2987,7 @@ static unsigned int OnAssocReq(struct adapter *padapter,
/* check if the supported rate is ok */
p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _SUPPORTEDRATES_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset);
- if (p == NULL) {
+ if (!p) {
DBG_88E("Rx a sta assoc-req which supported rate is empty!\n");
/* use our own rate set as statoin used */
/* memcpy(supportRate, AP_BSSRATE, AP_BSSRATE_LEN); */
@@ -3001,7 +3001,7 @@ static unsigned int OnAssocReq(struct adapter *padapter,
p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _EXT_SUPPORTEDRATES_IE_, &ie_len,
pkt_len - WLAN_HDR_A3_LEN - ie_offset);
- if (p != NULL) {
+ if (p) {
if (supportRateNum <= sizeof(supportRate)) {
memcpy(supportRate+supportRateNum, p+2, ie_len);
supportRateNum += ie_len;
@@ -3146,7 +3146,7 @@ static unsigned int OnAssocReq(struct adapter *padapter,
p = pframe + WLAN_HDR_A3_LEN + ie_offset; ie_len = 0;
for (;;) {
p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset);
- if (p != NULL) {
+ if (p) {
if (!memcmp(p+2, WMM_IE, 6)) {
pstat->flags |= WLAN_STA_WME;
@@ -3245,7 +3245,7 @@ static unsigned int OnAssocReq(struct adapter *padapter,
DBG_88E(" old AID %d\n", pstat->aid);
} else {
for (pstat->aid = 1; pstat->aid <= NUM_STA; pstat->aid++)
- if (pstapriv->sta_aid[pstat->aid - 1] == NULL)
+ if (!pstapriv->sta_aid[pstat->aid - 1])
break;
/* if (pstat->aid > NUM_STA) { */
@@ -3958,7 +3958,7 @@ static void init_channel_list(struct adapter *padapter,
((o->bw == BW40MINUS) || (o->bw == BW40PLUS)))
continue;
- if (reg == NULL) {
+ if (!reg) {
reg = &channel_list->reg_class[cla];
cla++;
reg->reg_class = o->op_class;
@@ -5333,7 +5333,7 @@ u8 set_tx_beacon_cmd(struct adapter *padapter)
ptxBeacon_parm = kmemdup(&pmlmeinfo->network,
sizeof(struct wlan_bssid_ex), GFP_ATOMIC);
- if (ptxBeacon_parm == NULL) {
+ if (!ptxBeacon_parm) {
kfree(ph2c);
res = _FAIL;
goto exit;
--
2.24.0
next reply other threads:[~2019-12-14 10:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-14 10:09 Michael Straube [this message]
2019-12-14 10:09 ` [PATCH 2/2] staging: rtl8188eu: add spaces around operators in rtw_mlme_ext.c Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191214100955.16670-1-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.