Re: [PATCH V6 net-next 08/11] dt-bindings: ptp: Introduce MII time stamping devices.

[Andrew Lunn <andrew@lunn.ch>]

On Mon, Dec 16, 2019 at 08:13:23AM -0800, Richard Cochran wrote:
> This patch add a new binding that allows non-PHY MII time stamping
> devices to find their buses.  The new documentation covers both the
> generic binding and one upcoming user.
> 
> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Rob might want YAML?

    



> ---
>  .../devicetree/bindings/ptp/ptp-ines.txt      | 35 ++++++++++++++++
>  .../devicetree/bindings/ptp/timestamper.txt   | 41 +++++++++++++++++++
>  2 files changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ptp/ptp-ines.txt
>  create mode 100644 Documentation/devicetree/bindings/ptp/timestamper.txt
> 
> diff --git a/Documentation/devicetree/bindings/ptp/ptp-ines.txt b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
> new file mode 100644
> index 000000000000..4c242bd1ce9c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
> @@ -0,0 +1,35 @@
> +ZHAW InES PTP time stamping IP core
> +
> +The IP core needs two different kinds of nodes.  The control node
> +lives somewhere in the memory map and specifies the address of the
> +control registers.  There can be up to three port handles placed as
> +attributes of PHY nodes.  These associate a particular MII bus with a
> +port index within the IP core.
> +
> +Required properties of the control node:
> +
> +- compatible:		"ines,ptp-ctrl"
> +- reg:			physical address and size of the register bank
> +
> +Required format of the port handle within the PHY node:
> +
> +- timestamper:		provides control node reference and
> +			the port channel within the IP core
> +
> +Example:
> +
> +	tstamper: timestamper@60000000 {
> +		compatible = "ines,ptp-ctrl";
> +		reg = <0x60000000 0x80>;
> +	};
> +
> +	ethernet@80000000 {
> +		...
> +		mdio {
> +			...
> +			ethernet-phy@3 {
> +				...
> +				timestamper = <&tstamper 0>;

You should also add this to Documentation/devicetree/bindings/net/ethernet-phy.yaml

    Andrew