From: Antoine Tenart <antoine.tenart@bootlin.com>
To: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
maxime.chevallier@bootlin.com, Willy Tarreau <w@1wt.eu>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH net-next] net: mvpp2: cycle comphy to power it down
Date: Tue, 17 Dec 2019 19:04:23 +0100 [thread overview]
Message-ID: <20191217180423.GI3160@kwain> (raw)
In-Reply-To: <E1ihF4S-0000gt-1B@rmk-PC.armlinux.org.uk>
Hi Russell,
On Tue, Dec 17, 2019 at 03:47:36PM +0000, Russell King wrote:
> Presently, at boot time, the comphys are enabled. For firmware
> compatibility reasons, the comphy driver does not power down the
> comphys at boot. Consequently, the ethernet comphys are left active
> until the network interfaces are brought through an up/down cycle.
>
> If the port is never used, the port wastes power needlessly. Arrange
> for the ethernet comphys to be cycled by the mvpp2 driver as if the
> interface went through an up/down cycle during driver probe, thereby
> powering them down.
>
> This saves:
> 270mW per 10G SFP+ port on the Macchiatobin Single Shot (eth0/eth1)
> 370mW per 10G PHY port on the Macchiatobin Double Shot (eth0/eth1)
> 160mW on the SFP port on either Macchiatobin flavour (eth3)
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Thanks!
Antoine
> ---
> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index c17b6cafef07..88a475606f19 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -5546,6 +5546,16 @@ static int mvpp2_port_probe(struct platform_device *pdev,
> port->phylink = NULL;
> }
>
> + /* Cycle the comphy to power it down, saving 270mW per port -
> + * don't worry about an error powering it up. When the comphy
> + * driver does this, we can remove this code.
> + */
> + if (port->comphy) {
> + err = mvpp22_comphy_init(port);
> + if (err == 0)
> + phy_power_off(port->comphy);
> + }
> +
> err = register_netdev(dev);
> if (err < 0) {
> dev_err(&pdev->dev, "failed to register netdev\n");
> --
> 2.20.1
>
--
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-12-17 18:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-17 15:47 [PATCH net-next] net: mvpp2: cycle comphy to power it down Russell King
2019-12-17 18:04 ` Antoine Tenart [this message]
2019-12-20 1:27 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191217180423.GI3160@kwain \
--to=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.