From: Jens Axboe <axboe@kernel.dk>
To: io-uring@vger.kernel.org
Cc: Brian Gianforcaro <b.gianfo@gmail.com>, Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 01/13] io_uring: fix stale comment and a few typos
Date: Wed, 18 Dec 2019 10:18:23 -0700 [thread overview]
Message-ID: <20191218171835.13315-2-axboe@kernel.dk> (raw)
In-Reply-To: <20191218171835.13315-1-axboe@kernel.dk>
From: Brian Gianforcaro <b.gianfo@gmail.com>
- Fix a few typos found while reading the code.
- Fix stale io_get_sqring comment referencing s->sqe, the 's' parameter
was renamed to 'req', but the comment still holds.
Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
fs/io-wq.c | 2 +-
fs/io_uring.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 90c4978781fb..11e80b7252a8 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -948,7 +948,7 @@ static enum io_wq_cancel io_wqe_cancel_work(struct io_wqe *wqe,
/*
* Now check if a free (going busy) or busy worker has the work
* currently running. If we find it there, we'll return CANCEL_RUNNING
- * as an indication that we attempte to signal cancellation. The
+ * as an indication that we attempt to signal cancellation. The
* completion will run normally in this case.
*/
rcu_read_lock();
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 9b1833fedc5c..04cff3870b3b 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -1178,7 +1178,7 @@ static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
}
/*
- * Poll for a mininum of 'min' events. Note that if min == 0 we consider that a
+ * Poll for a minimum of 'min' events. Note that if min == 0 we consider that a
* non-spinning poll check - we'll still enter the driver poll loop, but only
* as a non-spinning completion check.
*/
@@ -2573,7 +2573,7 @@ static enum hrtimer_restart io_timeout_fn(struct hrtimer *timer)
/*
* Adjust the reqs sequence before the current one because it
- * will consume a slot in the cq_ring and the the cq_tail
+ * will consume a slot in the cq_ring and the cq_tail
* pointer will be increased, otherwise other timeout reqs may
* return in advance without waiting for enough wait_nr.
*/
@@ -3430,7 +3430,7 @@ static void io_commit_sqring(struct io_ring_ctx *ctx)
}
/*
- * Fetch an sqe, if one is available. Note that s->sqe will point to memory
+ * Fetch an sqe, if one is available. Note that req->sqe will point to memory
* that is mapped by userspace. This means that care needs to be taken to
* ensure that reads are stable, as we cannot rely on userspace always
* being a good citizen. If members of the sqe are validated and then later
@@ -3694,7 +3694,7 @@ static inline bool io_should_wake(struct io_wait_queue *iowq, bool noflush)
struct io_ring_ctx *ctx = iowq->ctx;
/*
- * Wake up if we have enough events, or if a timeout occured since we
+ * Wake up if we have enough events, or if a timeout occurred since we
* started waiting. For timeouts, we always want to return to userspace,
* regardless of event count.
*/
--
2.24.1
next prev parent reply other threads:[~2019-12-18 17:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 17:18 [PATCHSET v3] io_uring fixes for 5.5-rc3 Jens Axboe
2019-12-18 17:18 ` Jens Axboe [this message]
2019-12-18 17:18 ` [PATCH 02/13] io_uring: fix sporadic -EFAULT from IORING_OP_RECVMSG Jens Axboe
2019-12-18 17:18 ` [PATCH 03/13] io-wq: re-add io_wq_current_is_worker() Jens Axboe
2019-12-18 17:18 ` [PATCH 04/13] io_uring: fix pre-prepped issue with force_nonblock == true Jens Axboe
2019-12-18 17:18 ` [PATCH 05/13] io_uring: remove 'sqe' parameter to the OP helpers that take it Jens Axboe
2019-12-18 17:18 ` [PATCH 06/13] io_uring: any deferred command must have stable sqe data Jens Axboe
2019-12-18 17:18 ` [PATCH 07/13] io_uring: make HARDLINK imply LINK Jens Axboe
2019-12-18 17:18 ` [PATCH 08/13] io_uring: make IORING_POLL_ADD and IORING_POLL_REMOVE deferrable Jens Axboe
2019-12-18 17:18 ` [PATCH 09/13] io_uring: make IORING_OP_CANCEL_ASYNC deferrable Jens Axboe
2019-12-18 17:18 ` [PATCH 10/13] io_uring: make IORING_OP_TIMEOUT_REMOVE deferrable Jens Axboe
2019-12-18 17:18 ` [PATCH 11/13] io_uring: read opcode and user_data from SQE exactly once Jens Axboe
2019-12-18 17:18 ` [PATCH 12/13] io_uring: warn about unhandled opcode Jens Axboe
2019-12-18 17:18 ` [PATCH 13/13] io_uring: don't wait when under-submitting Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218171835.13315-2-axboe@kernel.dk \
--to=axboe@kernel.dk \
--cc=b.gianfo@gmail.com \
--cc=io-uring@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.