From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Taehee Yoo <ap420073@gmail.com>,
Jon Maloy <jon.maloy@ericsson.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.14 07/36] tipc: fix ordering of tipc module init and exit routine
Date: Thu, 19 Dec 2019 19:34:24 +0100 [thread overview]
Message-ID: <20191219182855.680654180@linuxfoundation.org> (raw)
In-Reply-To: <20191219182848.708141124@linuxfoundation.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 9cf1cd8ee3ee09ef2859017df2058e2f53c5347f ]
In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.
Test commands:
#SHELL1
while :
do
modprobe tipc
modprobe -rv tipc
done
#SHELL2
while :
do
tipc link list
done
Splat looks like:
[ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[ 59.622550][ T2780] NET: Registered protocol family 30
[ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 59.625875][ T2780] tipc: Started in single node mode
[ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 59.636478][ T2788] Call Trace:
[ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0
[ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380
[ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270
[ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0
[ 59.643050][ T2788] netlink_dump+0x49c/0xed0
[ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0
[ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800
[ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670
[ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800
[ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90
[ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0
[ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0
[ 59.647821][ T2788] ? genl_unlock+0x20/0x20
[ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0
[ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0
[ 59.649276][ T2788] ? genl_rcv+0x15/0x40
[ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0
[ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350
[ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[ 59.651491][ T2788] ? netlink_ack+0x940/0x940
[ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0
[ 59.652449][ T2788] genl_rcv+0x24/0x40
[ 59.652841][ T2788] netlink_unicast+0x421/0x600
[ ... ]
Fixes: 7e4369057806 ("tipc: fix a slab object leak")
Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/core.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -116,14 +116,6 @@ static int __init tipc_init(void)
sysctl_tipc_rmem[1] = RCVBUF_DEF;
sysctl_tipc_rmem[2] = RCVBUF_MAX;
- err = tipc_netlink_start();
- if (err)
- goto out_netlink;
-
- err = tipc_netlink_compat_start();
- if (err)
- goto out_netlink_compat;
-
err = tipc_register_sysctl();
if (err)
goto out_sysctl;
@@ -144,8 +136,21 @@ static int __init tipc_init(void)
if (err)
goto out_bearer;
+ err = tipc_netlink_start();
+ if (err)
+ goto out_netlink;
+
+ err = tipc_netlink_compat_start();
+ if (err)
+ goto out_netlink_compat;
+
pr_info("Started in single node mode\n");
return 0;
+
+out_netlink_compat:
+ tipc_netlink_stop();
+out_netlink:
+ tipc_bearer_cleanup();
out_bearer:
unregister_pernet_device(&tipc_topsrv_net_ops);
out_pernet_topsrv:
@@ -155,22 +160,18 @@ out_socket:
out_pernet:
tipc_unregister_sysctl();
out_sysctl:
- tipc_netlink_compat_stop();
-out_netlink_compat:
- tipc_netlink_stop();
-out_netlink:
pr_err("Unable to start in single node mode\n");
return err;
}
static void __exit tipc_exit(void)
{
+ tipc_netlink_compat_stop();
+ tipc_netlink_stop();
tipc_bearer_cleanup();
unregister_pernet_device(&tipc_topsrv_net_ops);
tipc_socket_stop();
unregister_pernet_device(&tipc_net_ops);
- tipc_netlink_stop();
- tipc_netlink_compat_stop();
tipc_unregister_sysctl();
pr_info("Deactivated\n");
next prev parent reply other threads:[~2019-12-19 18:50 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 18:34 [PATCH 4.14 00/36] 4.14.160-stable review Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 01/36] net: bridge: deny dev_set_mac_address() when unregistering Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 02/36] net: dsa: fix flow dissection on Tx path Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 03/36] net: ethernet: ti: cpsw: fix extra rx interrupt Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 04/36] net: thunderx: start phy before starting autonegotiation Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 05/36] openvswitch: support asymmetric conntrack Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 06/36] tcp: md5: fix potential overestimation of TCP option space Greg Kroah-Hartman
2019-12-19 18:34 ` Greg Kroah-Hartman [this message]
2019-12-19 18:34 ` [PATCH 4.14 08/36] tcp: fix rejected syncookies due to stale timestamps Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 09/36] tcp: tighten acceptance of ACKs not matching a child socket Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 10/36] tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 11/36] inet: protect against too small mtu values Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 12/36] nvme: host: core: fix precedence of ternary operator Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 13/36] Revert "regulator: Defer init completion for a while after late_initcall" Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 14/36] PCI/PM: Always return devices to D0 when thawing Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 15/36] PCI: Fix Intel ACS quirk UPDCR register address Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 16/36] PCI/MSI: Fix incorrect MSI-X masking on resume Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 17/36] PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 18/36] xtensa: fix TLB sanity checker Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 19/36] rpmsg: glink: Set tail pointer to 0 at end of FIFO Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 20/36] rpmsg: glink: Fix reuse intents memory leak issue Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 21/36] rpmsg: glink: Fix use after free in open_ack TIMEOUT case Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 22/36] rpmsg: glink: Put an extra reference during cleanup Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 23/36] rpmsg: glink: Fix rpmsg_register_device err handling Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 24/36] rpmsg: glink: Dont send pending rx_done during remove Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 25/36] rpmsg: glink: Free pending deferred work on remove Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 26/36] CIFS: Respect O_SYNC and O_DIRECT flags during reconnect Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 27/36] ARM: dts: s3c64xx: Fix init order of clock providers Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 28/36] ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 29/36] vfio/pci: call irq_bypass_unregister_producer() before freeing irq Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 30/36] dma-buf: Fix memory leak in sync_file_merge() Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 31/36] dm btree: increase rebalance threshold in __rebalance2() Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 32/36] scsi: iscsi: Fix a potential deadlock in the timeout handler Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 33/36] drm/radeon: fix r1xx/r2xx register checker for POT textures Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 34/36] xhci: fix USB3 device initiated resume race with roothub autosuspend Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 35/36] net: stmmac: use correct DMA buffer size in the RX descriptor Greg Kroah-Hartman
2019-12-19 18:34 ` [PATCH 4.14 36/36] net: stmmac: dont stop NAPI processing when dropping a packet Greg Kroah-Hartman
2019-12-20 4:39 ` [PATCH 4.14 00/36] 4.14.160-stable review shuah
2019-12-20 5:34 ` Naresh Kamboju
2019-12-20 10:29 ` Jon Hunter
2019-12-20 10:29 ` Jon Hunter
2019-12-20 18:48 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219182855.680654180@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=ap420073@gmail.com \
--cc=davem@davemloft.net \
--cc=jon.maloy@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.