Re: [RESEND PATCH v1 08/15] dt-bindings: phy: phy-cadence-torrent: Add clock bindings

[Rob Herring <robh@kernel.org>]

On Wed, Dec 11, 2019 at 02:09:13PM +0100, Yuti Amonkar wrote:
> Add Torrent PHY reference clock bindings.
> 
> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
> ---
>  .../devicetree/bindings/phy/phy-cadence-torrent.yaml         | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> index 4fa9d0a..8069498 100644
> --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> @@ -17,6 +17,14 @@ properties:
>    compatible:
>      const: cdns,torrent-phy
>  
> +  clocks:
> +    maxItems: 1
> +    description:
> +      PHY reference clock. Must contain an entry in clock-names.
> +
> +  clock-names:
> +    const: "refclk"

Don't need quotes. You don't really need *-names when there's only one 
entry.

> +
>    reg:
>      items:
>        - description: Offset of the DPTX PHY configuration registers.
> @@ -41,6 +49,8 @@ properties:
>  
>  required:
>    - compatible
> +  - clocks
> +  - clock-names

ABI again. You can't add new required properties.

>    - reg
>    - "#phy-cells"
>  
> @@ -53,5 +63,7 @@ examples:
>            num_lanes = <4>;
>            max_bit_rate = <8100>;
>            #phy-cells = <0>;
> +          clocks = <&ref_clk>;
> +          clock-names = "refclk";
>      };
>  ...
> -- 
> 2.7.4
>