From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-iio@vger.kernel.org, lorenzo.bianconi@redhat.com
Subject: Re: [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page
Date: Mon, 23 Dec 2019 16:51:40 +0000 [thread overview]
Message-ID: <20191223165140.1da5632c@archlinux> (raw)
In-Reply-To: <9301949c51a78df2c818619c3be634274f13a790.1576341963.git.lorenzo@kernel.org>
On Sat, 14 Dec 2019 17:52:55 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Check if the master enable register is located in the primary or in the
> secondary memory page. This is a preliminary patch to support i2c master
> controller on lsm6dsm devices
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 6 +++++-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 2 ++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 +++++++----
> 3 files changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index fb76e0d6770d..0f8f3fbde67a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -184,7 +184,11 @@ struct st_lsm6dsx_hw_ts_settings {
> */
> struct st_lsm6dsx_shub_settings {
> struct st_lsm6dsx_reg page_mux;
> - struct st_lsm6dsx_reg master_en;
> + struct {
> + bool sec_page;
> + u8 addr;
> + u8 mask;
> + } master_en;
> struct st_lsm6dsx_reg pullup_en;
> struct st_lsm6dsx_reg aux_sens;
> struct st_lsm6dsx_reg wr_once;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index bf995b58c333..fe1aaaf68a9b 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -867,6 +867,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .mask = BIT(6),
> },
> .master_en = {
> + .sec_page = true,
> .addr = 0x14,
> .mask = BIT(2),
> },
> @@ -1242,6 +1243,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .mask = BIT(6),
> },
> .master_en = {
> + .sec_page = true,
> .addr = 0x14,
> .mask = BIT(2),
> },
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index 5684e663d0aa..767482e61a1e 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -185,15 +185,18 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
> mutex_lock(&hw->page_lock);
>
> hub_settings = &hw->settings->shub_settings;
> - err = st_lsm6dsx_set_page(hw, true);
> - if (err < 0)
> - goto out;
> + if (hub_settings->master_en.sec_page) {
> + err = st_lsm6dsx_set_page(hw, true);
> + if (err < 0)
> + goto out;
> + }
>
> data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
> err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
> hub_settings->master_en.mask, data);
>
> - st_lsm6dsx_set_page(hw, false);
> + if (hub_settings->master_en.sec_page)
> + st_lsm6dsx_set_page(hw, false);
> out:
> mutex_unlock(&hw->page_lock);
>
next prev parent reply other threads:[~2019-12-23 17:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-14 16:52 [PATCH 0/6] introduce i2c master controller support for LSM6DSM Lorenzo Bianconi
2019-12-14 16:52 ` [PATCH 1/6] iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings Lorenzo Bianconi
2019-12-23 16:50 ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page Lorenzo Bianconi
2019-12-23 16:51 ` Jonathan Cameron [this message]
2019-12-14 16:52 ` [PATCH 3/6] iio: imu: st_lsm6dsx: check if pull_up " Lorenzo Bianconi
2019-12-23 16:51 ` Jonathan Cameron
2019-12-23 16:59 ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 4/6] iio: imu: st_lsm6dsx: check if shub_output reg " Lorenzo Bianconi
2019-12-23 17:00 ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 5/6] iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output Lorenzo Bianconi
2019-12-23 17:01 ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 6/6] iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm Lorenzo Bianconi
2019-12-23 16:49 ` Jonathan Cameron
2019-12-23 17:25 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191223165140.1da5632c@archlinux \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.