From: mingming lee <mingming.lee@mediatek.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 0/8] Add support for MediaTek MT8512 Soc
Date: Tue, 31 Dec 2019 11:29:18 +0800 [thread overview]
Message-ID: <20191231032926.2194-1-mingming.lee@mediatek.com> (raw)
This patch series adds basic boot support on eMMC for the MediaTek
MT8512 SoC based boards. This series add the clock, pinctrl drivers
and the SoC initializaton code.
---
Changes for v2:
- Sort device nodes reg address order and alphabetically.
- Split the changes in mtk clk for 8512 into two patchs.
- Delete fix patch for clock-rate overflow in mtk clk
since have been included in changelist 1207053
mingming lee (8):
ARM: MediaTek: Add support for MediaTek MT8512 SoC
clk: mediatek: add driver support for MT8512
clk: mediatek: add set_clr_upd mux type flow
clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll
pinctrl: mediatek: add driver for MT8512
mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
mmc: mtk-sd: fix hang when data read quickly
ARM: MediaTek: add basic support for MT8512 boards
arch/arm/dts/Makefile | 1 +
arch/arm/dts/mt8512-bm1-emmc.dts | 106 +++
arch/arm/dts/mt8512.dtsi | 115 +++
arch/arm/mach-mediatek/Kconfig | 15 +
arch/arm/mach-mediatek/Makefile | 1 +
arch/arm/mach-mediatek/mt8512/Makefile | 4 +
arch/arm/mach-mediatek/mt8512/init.c | 78 ++
arch/arm/mach-mediatek/mt8512/lowlevel_init.S | 32 +
board/mediatek/mt8512/Kconfig | 14 +
board/mediatek/mt8512/MAINTAINERS | 6 +
board/mediatek/mt8512/Makefile | 3 +
board/mediatek/mt8512/mt8512.c | 19 +
configs/mt8512_bm1_emmc_defconfig | 44 +
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8512.c | 873 ++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 68 +-
drivers/clk/mediatek/clk-mtk.h | 26 +
drivers/mmc/mtk-sd.c | 140 ++-
drivers/pinctrl/mediatek/Kconfig | 4 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt8512.c | 387 ++++++++
include/configs/mt8512.h | 60 ++
include/dt-bindings/clock/mt8512-clk.h | 197 ++++
23 files changed, 2138 insertions(+), 57 deletions(-)
create mode 100644 arch/arm/dts/mt8512-bm1-emmc.dts
create mode 100644 arch/arm/dts/mt8512.dtsi
create mode 100644 arch/arm/mach-mediatek/mt8512/Makefile
create mode 100644 arch/arm/mach-mediatek/mt8512/init.c
create mode 100644 arch/arm/mach-mediatek/mt8512/lowlevel_init.S
create mode 100644 board/mediatek/mt8512/Kconfig
create mode 100644 board/mediatek/mt8512/MAINTAINERS
create mode 100644 board/mediatek/mt8512/Makefile
create mode 100644 board/mediatek/mt8512/mt8512.c
create mode 100644 configs/mt8512_bm1_emmc_defconfig
create mode 100644 drivers/clk/mediatek/clk-mt8512.c
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt8512.c
create mode 100644 include/configs/mt8512.h
create mode 100644 include/dt-bindings/clock/mt8512-clk.h
--
2.24.1
next reply other threads:[~2019-12-31 3:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-31 3:29 mingming lee [this message]
2019-12-31 3:29 ` [PATCH v2 1/8] ARM: MediaTek: Add support for MediaTek MT8512 SoC mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 2/8] clk: mediatek: add driver support for MT8512 mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 3/8] clk: mediatek: add set_clr_upd mux type flow mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 4/8] clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll mingming lee
2020-01-16 14:41 ` Tom Rini
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 5/8] pinctrl: mediatek: add driver for MT8512 mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 6/8] mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 7/8] mmc: mtk-sd: fix hang when data read quickly mingming lee
2020-01-16 14:41 ` Tom Rini
2019-12-31 3:29 ` [PATCH v2 8/8] ARM: MediaTek: add basic support for MT8512 boards mingming lee
2020-01-16 14:41 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191231032926.2194-1-mingming.lee@mediatek.com \
--to=mingming.lee@mediatek.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.