From: Bjorn Helgaas <helgaas@kernel.org>
To: Logan Gunthorpe <logang@deltatee.com>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Kelvin.Cao@microchip.com, Eric Pilmore <epilmore@gigaio.com>,
Doug Meyer <dmeyer@gigaio.com>
Subject: Re: [PATCH 00/12] Switchtec Fixes and Gen4 Support
Date: Wed, 8 Jan 2020 15:47:28 -0600 [thread overview]
Message-ID: <20200108214728.GA209478@google.com> (raw)
In-Reply-To: <20200106190337.2428-1-logang@deltatee.com>
On Mon, Jan 06, 2020 at 12:03:25PM -0700, Logan Gunthorpe wrote:
> Hi,
>
> Please find a bunch of patches for the switchtec driver collected over the
> last few months.
>
> The first 2 patches fix a couple of minor bugs. Patch 3 adds support for
> a new event that is available in specific firmware versions. Patches 4 and
> 5 are some code cleanup changes to simplify the logic. And the last 6
> patches implement support for the new Gen4 hardware.
>
> This patchset is based on v5.5-rc5 and a git branch is available here:
>
> https://github.com/sbates130272/linux-p2pmem switchtec-next
>
> Thanks,
>
> Logan
>
> --
>
> Kelvin Cao (3):
> PCI/switchtec: Add gen4 support in struct flash_info_regs
> PCI/switchtec: Add permission check for the GAS access MRPC commands
> PCI/switchtec: Introduce gen4 variant IDS in the device ID table
>
> Logan Gunthorpe (6):
> PCI/switchtec: Fix vep_vector_number ioread width
> PCI/switchtec: Add support for new events
> PCI/switchtec: Introduce Generation Variable
> PCI/switchtec: Separate out gen3 specific fields in the sys_info_regs
> structure
> PCI/switchtec: Add gen4 support in struct sys_info_regs
> PCI: Apply switchtec DMA aliasing quirk to GEN4 devices
>
> Wesley Sheng (3):
> PCI/switchtec: Use dma_set_mask_and_coherent()
> PCI/switchtec: Remove redundant valid PFF number count
> PCI/switchtec: Move check event id from mask_event() to
> switchtec_event_isr()
Current order is:
[PATCH 01/12] PCI/switchtec: Use dma_set_mask_and_coherent()
[PATCH 02/12] PCI/switchtec: Fix vep_vector_number ioread width
[PATCH 03/12] PCI/switchtec: Add support for new events
[PATCH 04/12] PCI/switchtec: Remove redundant valid PFF number count
[PATCH 05/12] PCI/switchtec: Move check event id from mask_event() to switchtec_event_isr()
[PATCH 06/12] PCI/switchtec: Introduce Generation Variable
[PATCH 07/12] PCI/switchtec: Separate out gen3 specific fields in the sys_info_regs structure
[PATCH 08/12] PCI/switchtec: Add gen4 support in struct sys_info_regs
[PATCH 09/12] PCI/switchtec: Add gen4 support in struct flash_info_regs
[PATCH 10/12] PCI/switchtec: Add permission check for the GAS access MRPC commands
10/12 looks lonely in the middle of the gen4 stuff, and it looks like
it's unrelated to gen3/gen4? Maybe it could be moved up after 05/12?
[PATCH 11/12] PCI/switchtec: Introduce gen4 variant IDS in the device ID table
[PATCH 12/12] PCI: Apply switchtec DMA aliasing quirk to GEN4 devices
I speculatively reordered the permission check patch and applied these
to my pci/switchtec branch for v5.6 (reverse order from "git log"):
b96abab6314f ("PCI/switchtec: Add permission check for the GAS access MRPC commands")
5f23367bd4df ("PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr()")
6722d609bc82 ("PCI/switchtec: Remove redundant valid PFF number count")
3f3a521ecc81 ("PCI/switchtec: Add support for intercom notify and UEC Port")
9375646b4cf0 ("PCI/switchtec: Fix vep_vector_number ioread width")
aa82130a22f7 ("PCI/switchtec: Use dma_set_mask_and_coherent()")
If you rework any of the subsequent ones, you can just post those
without reposting these first six.
Bjorn
next prev parent reply other threads:[~2020-01-08 21:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 19:03 [PATCH 00/12] Switchtec Fixes and Gen4 Support Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 01/12] PCI/switchtec: Use dma_set_mask_and_coherent() Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 02/12] PCI/switchtec: Fix vep_vector_number ioread width Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 03/12] PCI/switchtec: Add support for new events Logan Gunthorpe
2020-01-08 21:33 ` Bjorn Helgaas
2020-01-08 21:47 ` Logan Gunthorpe
2020-01-14 2:07 ` Kelvin.Cao
2020-01-14 18:21 ` Logan Gunthorpe
2020-01-14 19:07 ` Bjorn Helgaas
2020-01-06 19:03 ` [PATCH 04/12] PCI/switchtec: Remove redundant valid PFF number count Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 05/12] PCI/switchtec: Move check event id from mask_event() to switchtec_event_isr() Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 06/12] PCI/switchtec: Introduce Generation Variable Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 07/12] PCI/switchtec: Separate out gen3 specific fields in the sys_info_regs structure Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 08/12] PCI/switchtec: Add gen4 support in struct sys_info_regs Logan Gunthorpe
2020-01-08 21:21 ` Bjorn Helgaas
2020-01-06 19:03 ` [PATCH 09/12] PCI/switchtec: Add gen4 support in struct flash_info_regs Logan Gunthorpe
2020-01-08 21:23 ` Bjorn Helgaas
2020-01-08 21:34 ` Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 10/12] PCI/switchtec: Add permission check for the GAS access MRPC commands Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 11/12] PCI/switchtec: Introduce gen4 variant IDS in the device ID table Logan Gunthorpe
2020-01-06 19:03 ` [PATCH 12/12] PCI: Apply switchtec DMA aliasing quirk to GEN4 devices Logan Gunthorpe
2020-01-08 21:47 ` Bjorn Helgaas [this message]
2020-01-08 21:53 ` [PATCH 00/12] Switchtec Fixes and Gen4 Support Logan Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200108214728.GA209478@google.com \
--to=helgaas@kernel.org \
--cc=Kelvin.Cao@microchip.com \
--cc=dmeyer@gigaio.com \
--cc=epilmore@gigaio.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=logang@deltatee.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.