All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 4.19 16/46] drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
Date: Tue, 14 Jan 2020 11:01:33 +0100	[thread overview]
Message-ID: <20200114094343.835349007@linuxfoundation.org> (raw)
In-Reply-To: <20200114094339.608068818@linuxfoundation.org>

From: Chen-Yu Tsai <wens@csie.org>

commit 4396393fb96449c56423fb4b351f76e45a6bcaf6 upstream.

In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.

However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.

Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.

This fixes the scrolling artifacts seen on my A13 tablet.

Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c |   15 ++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h |    1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -423,7 +423,7 @@ static void sun4i_tcon0_mode_set_rgb(str
 
 	WARN_ON(!tcon->quirks->has_channel_0);
 
-	tcon->dclk_min_div = 1;
+	tcon->dclk_min_div = tcon->quirks->dclk_min_div;
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
@@ -1249,12 +1249,14 @@ static int sun6i_tcon_set_mux(struct sun
 static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun5i_a13_tcon_set_mux,
 };
 
@@ -1263,6 +1265,7 @@ static const struct sun4i_tcon_quirks su
 	.has_channel_1		= true,
 	.has_lvds_alt		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 	.set_mux		= sun6i_tcon_set_mux,
 };
 
@@ -1270,11 +1273,13 @@ static const struct sun4i_tcon_quirks su
 	.has_channel_0		= true,
 	.has_channel_1		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	/* Same display pipeline structure as A10 */
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
@@ -1282,11 +1287,13 @@ static const struct sun4i_tcon_quirks su
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
 	.has_channel_0		= true,
 	.has_lvds_alt		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
 	.supports_lvds		= true,
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
@@ -1295,11 +1302,13 @@ static const struct sun4i_tcon_quirks su
 
 static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
-	.has_channel_0	= true,
-	.needs_edp_reset = true,
+	.has_channel_0		= true,
+	.needs_edp_reset	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -224,6 +224,7 @@ struct sun4i_tcon_quirks {
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 	bool    needs_edp_reset; /* a80 edp reset needed for tcon0 access */
 	bool	supports_lvds;   /* Does the TCON support an LVDS output? */
+	u8	dclk_min_div;	/* minimum divider for TCON0 DCLK */
 
 	/* callback to handle tcon muxing options */
 	int	(*set_mux)(struct sun4i_tcon *, const struct drm_encoder *);



  parent reply	other threads:[~2020-01-14 10:07 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14 10:01 [PATCH 4.19 00/46] 4.19.96-stable review Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 01/46] chardev: Avoid potential use-after-free in chrdev_open() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 02/46] i2c: fix bus recovery stop mode timing Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 03/46] usb: chipidea: host: Disable port power only if previously enabled Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 04/46] ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 05/46] ALSA: hda/realtek - Add new codec supported for ALCS1200A Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 06/46] ALSA: hda/realtek - Set EAPD control to default for ALC222 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 07/46] ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 08/46] kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 09/46] tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 10/46] tracing: Change offset type to s32 in preempt/irq tracepoints Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 11/46] HID: Fix slab-out-of-bounds read in hid_field_extract Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 12/46] HID: uhid: Fix returning EPOLLOUT from uhid_char_poll Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 13/46] HID: hid-input: clear unmapped usages Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 14/46] Input: add safety guards to input_set_keycode() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 15/46] Input: input_event - fix struct padding on sparc64 Greg Kroah-Hartman
2020-01-14 10:01 ` Greg Kroah-Hartman [this message]
2020-01-14 10:01 ` [PATCH 4.19 17/46] drm/fb-helper: Round up bits_per_pixel if possible Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 18/46] drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 19/46] can: kvaser_usb: fix interface sanity check Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 20/46] can: gs_usb: gs_usb_probe(): use descriptors of current altsetting Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 21/46] can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 22/46] can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 23/46] gpiolib: acpi: Turn dmi_system_id table into a generic quirk table Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 24/46] gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 25/46] staging: vt6656: set usb_set_intfdata on driver fail Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 26/46] USB: serial: option: add ZLP support for 0x1bc7/0x9010 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 27/46] usb: musb: fix idling for suspend after disconnect interrupt Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 28/46] usb: musb: Disable pullup at init Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 29/46] usb: musb: dma: Correct parameter passed to IRQ handler Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 30/46] staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 31/46] staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 32/46] serdev: Dont claim unsupported ACPI serial devices Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 33/46] tty: link tty and port before configuring it as console Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 34/46] tty: always relink the port Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 35/46] mwifiex: fix possible heap overflow in mwifiex_process_country_ie() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 36/46] mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 37/46] scsi: bfa: release allocated memory in case of error Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 38/46] rtl8xxxu: prevent leaking urb Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 39/46] ath10k: fix memory leak Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 40/46] HID: hiddev: fix mess in hiddev_open() Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 41/46] USB: Fix: Dont skip endpoint descriptors with maxpacket=0 Greg Kroah-Hartman
2020-01-14 10:01 ` [PATCH 4.19 42/46] phy: cpcap-usb: Fix error path when no host driver is loaded Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 43/46] phy: cpcap-usb: Fix flakey host idling and enumerating of devices Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 44/46] netfilter: arp_tables: init netns pointer in xt_tgchk_param struct Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 45/46] netfilter: conntrack: dccp, sctp: handle null timeout argument Greg Kroah-Hartman
2020-01-14 10:02 ` [PATCH 4.19 46/46] netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present Greg Kroah-Hartman
2020-01-14 15:02 ` [PATCH 4.19 00/46] 4.19.96-stable review Jon Hunter
2020-01-14 15:02   ` Jon Hunter
2020-01-14 18:15 ` Guenter Roeck
2020-01-14 20:22 ` shuah
2020-01-15  2:09 ` Daniel Díaz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200114094343.835349007@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime@cerno.tech \
    --cc=stable@vger.kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.