From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 5/5] staging: rtl8188eu: cleanup whitespace in rtl8188e_dm.c
Date: Tue, 14 Jan 2020 14:44:22 +0100 [thread overview]
Message-ID: <20200114134422.13598-5-straube.linux@gmail.com> (raw)
In-Reply-To: <20200114134422.13598-1-straube.linux@gmail.com>
Replace tabs with spaces and/or remove spaces to use typical kernel
horizontal whitespace.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/rtl8188eu/hal/rtl8188e_dm.c | 44 ++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
index 5348db2725a1..241f55b92808 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
@@ -21,7 +21,7 @@
/* Initialize GPIO setting registers */
static void dm_InitGPIOSetting(struct adapter *Adapter)
{
- u8 tmp1byte;
+ u8 tmp1byte;
tmp1byte = usb_read8(Adapter, REG_GPIO_MUXCFG);
tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
@@ -35,7 +35,7 @@ static void dm_InitGPIOSetting(struct adapter *Adapter)
static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
{
struct hal_data_8188e *hal_data = Adapter->HalData;
- struct dm_priv *pdmpriv = &hal_data->dmpriv;
+ struct dm_priv *pdmpriv = &hal_data->dmpriv;
struct odm_dm_struct *dm_odm = &hal_data->odmpriv;
/* Init Value */
@@ -59,38 +59,38 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
dm_odm->BbSwingIdxOfdmCurrent = 12;
dm_odm->BbSwingFlagOfdm = false;
- pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
dm_odm->SupportAbility = pdmpriv->InitODMFlag;
}
static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
{
- struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
- struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
struct hal_data_8188e *hal_data = Adapter->HalData;
struct odm_dm_struct *dm_odm = &hal_data->odmpriv;
- struct dm_priv *pdmpriv = &hal_data->dmpriv;
+ struct dm_priv *pdmpriv = &hal_data->dmpriv;
int i;
- pdmpriv->InitODMFlag = ODM_BB_DIG |
- ODM_BB_RA_MASK |
- ODM_BB_DYNAMIC_TXPWR |
- ODM_BB_FA_CNT |
- ODM_BB_RSSI_MONITOR |
- ODM_BB_CCK_PD |
- ODM_BB_PWR_SAVE |
- ODM_MAC_EDCA_TURBO |
- ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_BB_DIG |
+ ODM_BB_RA_MASK |
+ ODM_BB_DYNAMIC_TXPWR |
+ ODM_BB_FA_CNT |
+ ODM_BB_RSSI_MONITOR |
+ ODM_BB_CCK_PD |
+ ODM_BB_PWR_SAVE |
+ ODM_MAC_EDCA_TURBO |
+ ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
if (hal_data->AntDivCfg)
pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;
if (Adapter->registrypriv.mp_mode == 1) {
- pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
}
dm_odm->SupportAbility = pdmpriv->InitODMFlag;
@@ -123,7 +123,7 @@ static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
void rtl8188e_InitHalDm(struct adapter *Adapter)
{
- struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
+ struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
struct odm_dm_struct *dm_odm = &Adapter->HalData->odmpriv;
dm_InitGPIOSetting(Adapter);
@@ -167,7 +167,7 @@ void rtw_hal_dm_watchdog(struct adapter *Adapter)
void rtw_hal_dm_init(struct adapter *Adapter)
{
- struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
+ struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
struct odm_dm_struct *podmpriv = &Adapter->HalData->odmpriv;
memset(pdmpriv, 0, sizeof(struct dm_priv));
@@ -185,7 +185,7 @@ void rtw_hal_antdiv_rssi_compared(struct adapter *Adapter,
/* select optimum_antenna for before linked => For antenna
* diversity
*/
- if (dst->Rssi >= src->Rssi) {/* keep org parameter */
+ if (dst->Rssi >= src->Rssi) {/* keep org parameter */
src->Rssi = dst->Rssi;
src->PhyInfo.Optimum_antenna =
dst->PhyInfo.Optimum_antenna;
--
2.24.1
prev parent reply other threads:[~2020-01-14 13:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 13:44 [PATCH 1/5] staging: rtl8188eu: refactor rtw_hal_antdiv_before_linked() Michael Straube
2020-01-14 13:44 ` [PATCH 2/5] staging: rtl8188eu: convert rtw_hal_antdiv_before_linked() to bool Michael Straube
2020-01-14 13:44 ` [PATCH 3/5] staging: rtl8188eu: cleanup long lines in rtl8188e_dm.c Michael Straube
2020-01-14 13:44 ` [PATCH 4/5] staging: rtl8188eu: remove unnecessary parentheses " Michael Straube
2020-01-14 13:44 ` Michael Straube [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114134422.13598-5-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.