From: Matthias Kaehlcke <mka@chromium.org>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amit.kucheria@verdurent.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set frequency limits
Date: Tue, 14 Jan 2020 10:51:02 -0800 [thread overview]
Message-ID: <20200114185102.GJ89495@google.com> (raw)
In-Reply-To: <bae154ef-cbe6-de24-26c7-a7d4338bd55e@samsung.com>
On Mon, Jan 13, 2020 at 04:25:17PM +0900, Chanwoo Choi wrote:
> Hi,
>
> On 1/11/20 2:49 AM, Matthias Kaehlcke wrote:
> > Now that devfreq supports limiting the frequency range of a device
> > through PM QoS make use of it instead of disabling OPPs that should
> > not be used.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > ---
> >
> > drivers/thermal/devfreq_cooling.c | 66 ++++++++++---------------------
> > 1 file changed, 20 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
> > index ef59256887ff..3a63603afcf2 100644
> > --- a/drivers/thermal/devfreq_cooling.c
> > +++ b/drivers/thermal/devfreq_cooling.c
> > @@ -24,11 +24,13 @@
> > #include <linux/idr.h>
> > #include <linux/slab.h>
> > #include <linux/pm_opp.h>
> > +#include <linux/pm_qos.h>
> > #include <linux/thermal.h>
> >
> > #include <trace/events/thermal.h>
> >
> > -#define SCALE_ERROR_MITIGATION 100
> > +#define HZ_PER_KHZ 1000
> > +#define SCALE_ERROR_MITIGATION 100
> >
> > static DEFINE_IDA(devfreq_ida);
> >
> > @@ -65,49 +67,9 @@ struct devfreq_cooling_device {
> > struct devfreq_cooling_power *power_ops;
> > u32 res_util;
> > int capped_state;
> > + struct dev_pm_qos_request req_max_freq;
>
> Need to add the description of 'req_max_freq'.
will add the description
> > };
> >
> > -/**
> > - * partition_enable_opps() - disable all opps above a given state
> > - * @dfc: Pointer to devfreq we are operating on
> > - * @cdev_state: cooling device state we're setting
> > - *
> > - * Go through the OPPs of the device, enabling all OPPs until
> > - * @cdev_state and disabling those frequencies above it.
> > - */
> > -static int partition_enable_opps(struct devfreq_cooling_device *dfc,
> > - unsigned long cdev_state)
> > -{
> > - int i;
> > - struct device *dev = dfc->devfreq->dev.parent;
> > -
> > - for (i = 0; i < dfc->freq_table_size; i++) {
> > - struct dev_pm_opp *opp;
> > - int ret = 0;
> > - unsigned int freq = dfc->freq_table[i];
> > - bool want_enable = i >= cdev_state ? true : false;
> > -
> > - opp = dev_pm_opp_find_freq_exact(dev, freq, !want_enable);
> > -
> > - if (PTR_ERR(opp) == -ERANGE)
> > - continue;
> > - else if (IS_ERR(opp))
> > - return PTR_ERR(opp);
> > -
> > - dev_pm_opp_put(opp);
> > -
> > - if (want_enable)
> > - ret = dev_pm_opp_enable(dev, freq);
> > - else
> > - ret = dev_pm_opp_disable(dev, freq);
> > -
> > - if (ret)
> > - return ret;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
> > unsigned long *state)
> > {
> > @@ -134,7 +96,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> > struct devfreq_cooling_device *dfc = cdev->devdata;
> > struct devfreq *df = dfc->devfreq;
> > struct device *dev = df->dev.parent;
> > - int ret;
> > + unsigned long freq;
> >
> > if (state == dfc->cooling_state)
> > return 0;
> > @@ -144,9 +106,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> > if (state >= dfc->freq_table_size)
> > return -EINVAL;
> >
> > - ret = partition_enable_opps(dfc, state);
> > - if (ret)
> > - return ret;
> > + freq = dfc->freq_table[state];
> > +
> > + dev_pm_qos_update_request(&dfc->req_max_freq,
> > + DIV_ROUND_UP(freq, HZ_PER_KHZ));
> >
> > dfc->cooling_state = state;
> >
> > @@ -529,6 +492,12 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
> > if (err)
> > goto free_dfc;
> >
> > + err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq,
> > + DEV_PM_QOS_MAX_FREQUENCY,
> > + PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
> > + if (err < 0)
> > + goto remove_qos_req;
>
> Jump 'free_table' instead of 'remove_qos_req'.
ack
> > +
> > err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
> > if (err < 0)
> > goto free_tables;
>
> Jump remove_qos_req.
ack
> > @@ -552,6 +521,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
> >
> > release_ida:
> > ida_simple_remove(&devfreq_ida, dfc->id);
> > +
> > +remove_qos_req:
> > + dev_pm_qos_remove_request(&dfc->req_max_freq);
> > +
> > free_tables:
> > kfree(dfc->power_table);
> > kfree(dfc->freq_table);
> > @@ -600,6 +573,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
> >
> > thermal_cooling_device_unregister(dfc->cdev);
> > ida_simple_remove(&devfreq_ida, dfc->id);
> > + dev_pm_qos_remove_request(&dfc->req_max_freq);
> > kfree(dfc->power_table);
> > kfree(dfc->freq_table);
next prev parent reply other threads:[~2020-01-14 18:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200110174931epcas1p49c79567945e125829188174293d99850@epcas1p4.samsung.com>
2020-01-10 17:49 ` [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set frequency limits Matthias Kaehlcke
2020-01-10 17:49 ` [PATCH 2/2] PM / devfreq: Use exclusively PM QoS to determine " Matthias Kaehlcke
2020-01-13 7:31 ` Chanwoo Choi
2020-01-14 16:08 ` Leonard Crestez
2020-01-14 17:35 ` Chanwoo Choi
2020-01-14 19:13 ` Matthias Kaehlcke
2020-01-13 7:25 ` [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set " Chanwoo Choi
2020-01-14 18:51 ` Matthias Kaehlcke [this message]
2020-01-14 16:08 ` Leonard Crestez
2020-01-14 19:07 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114185102.GJ89495@google.com \
--to=mka@chromium.org \
--cc=amit.kucheria@verdurent.com \
--cc=cw00.choi@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=kyungmin.park@samsung.com \
--cc=leonard.crestez@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.