All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: linux-usb@vger.kernel.org, stable <stable@vger.kernel.org>,
	Felipe Balbi <balbi@kernel.org>
Subject: [PATCH 2/5] USB: serial: ir-usb: fix link-speed handling
Date: Wed, 22 Jan 2020 11:15:27 +0100	[thread overview]
Message-ID: <20200122101530.29176-3-johan@kernel.org> (raw)
In-Reply-To: <20200122101530.29176-1-johan@kernel.org>

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org>     # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ir-usb.c | 20 ++++++++++----------
 include/linux/usb/irda.h    | 13 ++++++++++++-
 2 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index c3b06fc5a7f0..26eab1307165 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -335,34 +335,34 @@ static void ir_set_termios(struct tty_struct *tty,
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
index 396d2b043e64..556a801efce3 100644
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *
-- 
2.24.1


  parent reply	other threads:[~2020-01-22 10:15 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-22 10:15 [PATCH 0/5] USB: serial: ir-usb fixes and cleanups Johan Hovold
2020-01-22 10:15 ` [PATCH 1/5] USB: serial: ir-usb: add missing endpoint sanity check Johan Hovold
2020-01-22 13:25   ` Greg KH
2020-01-22 10:15 ` Johan Hovold [this message]
2020-01-22 13:24   ` [PATCH 2/5] USB: serial: ir-usb: fix link-speed handling Greg KH
2020-01-22 13:35     ` Johan Hovold
2020-01-22 10:15 ` [PATCH 3/5] USB: serial: ir-usb: fix IrLAP framing Johan Hovold
2020-01-22 13:25   ` Greg KH
2020-01-22 13:37     ` Johan Hovold
2020-01-22 10:15 ` [PATCH 4/5] USB: serial: ir-usb: make set_termios synchronous Johan Hovold
2020-01-22 13:26   ` Greg KH
2020-01-22 10:15 ` [PATCH 5/5] USB: serial: ir-usb: simplify endpoint check Johan Hovold
2020-01-22 13:26   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200122101530.29176-3-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=balbi@kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.