All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: u-boot@lists.denx.de
Subject: [RFC PATCH 0/5] arm: Restore minimal support for ST-Ericsson U8500 SoC
Date: Wed, 22 Jan 2020 17:47:07 +0100	[thread overview]
Message-ID: <20200122164707.GA883@gerhold.net> (raw)
In-Reply-To: <20200104174519.19238-1-stephan@gerhold.net>

Hi Tom,

On Sat, Jan 04, 2020 at 06:45:14PM +0100, Stephan Gerhold wrote:
> This patch series restores minimal U-Boot support for
> the ST-Ericsson NovaThor U8500 SoC.
> 
> Previous support for U8500 was removed in
> commit 68282f55b846 ("arm: Remove unused ST-Ericsson u8500 arch")
> since none of the boards were converted to generic boards
> before the deadline.
> 
> The motivation for adding the SoC and board is explained in
>   - Patch 3 ("arm: Add support for ST-Ericsson U8500 SoC") and
>   - Patch 5 ("board: Add new Samsung "stemmy" board based on ST-Ericsson U8500")
> 
> I have additional patches for MMC, USB, display and the "stemmy"
> board, that configure it to provide an Android fastboot interface
> with similar functionality as the original Samsung bootloader.
> Some of the patches require some additional work, so I thought
> it is easier to start with some minimal changes first (only UART).
> 
> I think this makes the patch series quite straightforward,
> with only ~225 new lines of C code, plus device tree and documentation.
> The only patch that stands out with ~1.8k lines is the device tree
> import, directly copied (without modification) from the Linux kernel.
> 

Since we are approaching the end of the merge window,
I was wondering if there is anything I can do to get this patch set
applied for v2020.04?

Thanks,
Stephan

> 
> Stephan Gerhold (5):
>   timer: Add driver for Nomadik Multi Timer Unit (MTU)
>   arm: dts: Import device tree for ST-Ericsson Ux500
>   arm: Add support for ST-Ericsson U8500 SoC
>   MAINTAINERS: Add ARM U8500
>   board: Add new Samsung "stemmy" board based on ST-Ericsson U8500
> 
>  MAINTAINERS                                |    8 +
>  arch/arm/Kconfig                           |   20 +
>  arch/arm/Makefile                          |    1 +
>  arch/arm/dts/Makefile                      |    2 +
>  arch/arm/dts/ste-ab8500.dtsi               |  328 ++++++
>  arch/arm/dts/ste-ab8505.dtsi               |  275 +++++
>  arch/arm/dts/ste-dbx5x0-u-boot.dtsi        |   29 +
>  arch/arm/dts/ste-dbx5x0.dtsi               | 1144 ++++++++++++++++++++
>  arch/arm/dts/ste-ux500-samsung-stemmy.dts  |   20 +
>  arch/arm/include/asm/gpio.h                |    2 +-
>  arch/arm/mach-u8500/Kconfig                |   27 +
>  arch/arm/mach-u8500/Makefile               |    4 +
>  arch/arm/mach-u8500/cache.c                |   37 +
>  arch/arm/mach-u8500/cpuinfo.c              |   25 +
>  board/ste/stemmy/Kconfig                   |   12 +
>  board/ste/stemmy/MAINTAINERS               |    6 +
>  board/ste/stemmy/Makefile                  |    2 +
>  board/ste/stemmy/README                    |   49 +
>  board/ste/stemmy/stemmy.c                  |   18 +
>  configs/stemmy_defconfig                   |   18 +
>  drivers/timer/Kconfig                      |    9 +
>  drivers/timer/Makefile                     |    1 +
>  drivers/timer/nomadik-mtu-timer.c          |  114 ++
>  include/configs/stemmy.h                   |   29 +
>  include/dt-bindings/arm/ux500_pm_domains.h |   15 +
>  include/dt-bindings/clock/ste-ab8500.h     |   12 +
>  include/dt-bindings/mfd/dbx500-prcmu.h     |   84 ++
>  27 files changed, 2290 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/ste-ab8500.dtsi
>  create mode 100644 arch/arm/dts/ste-ab8505.dtsi
>  create mode 100644 arch/arm/dts/ste-dbx5x0-u-boot.dtsi
>  create mode 100644 arch/arm/dts/ste-dbx5x0.dtsi
>  create mode 100644 arch/arm/dts/ste-ux500-samsung-stemmy.dts
>  create mode 100644 arch/arm/mach-u8500/Kconfig
>  create mode 100644 arch/arm/mach-u8500/Makefile
>  create mode 100644 arch/arm/mach-u8500/cache.c
>  create mode 100644 arch/arm/mach-u8500/cpuinfo.c
>  create mode 100644 board/ste/stemmy/Kconfig
>  create mode 100644 board/ste/stemmy/MAINTAINERS
>  create mode 100644 board/ste/stemmy/Makefile
>  create mode 100644 board/ste/stemmy/README
>  create mode 100644 board/ste/stemmy/stemmy.c
>  create mode 100644 configs/stemmy_defconfig
>  create mode 100644 drivers/timer/nomadik-mtu-timer.c
>  create mode 100644 include/configs/stemmy.h
>  create mode 100644 include/dt-bindings/arm/ux500_pm_domains.h
>  create mode 100644 include/dt-bindings/clock/ste-ab8500.h
>  create mode 100644 include/dt-bindings/mfd/dbx500-prcmu.h
> 
> -- 
> 2.24.1
> 

  parent reply	other threads:[~2020-01-22 16:47 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-04 17:45 [RFC PATCH 0/5] arm: Restore minimal support for ST-Ericsson U8500 SoC Stephan Gerhold
2020-01-04 17:45 ` [RFC PATCH 1/5] timer: Add driver for Nomadik Multi Timer Unit (MTU) Stephan Gerhold
2020-01-06  1:48   ` Linus Walleij
2020-01-23 21:58   ` Tom Rini
2020-01-04 17:45 ` [RFC PATCH 2/5] arm: dts: Import device tree for ST-Ericsson Ux500 Stephan Gerhold
2020-01-06  1:48   ` Linus Walleij
2020-01-23 21:58   ` Tom Rini
2020-01-04 17:45 ` [RFC PATCH 3/5] arm: Add support for ST-Ericsson U8500 SoC Stephan Gerhold
2020-01-06  1:49   ` Linus Walleij
2020-01-23 21:58   ` Tom Rini
2020-01-04 17:45 ` [RFC PATCH 4/5] MAINTAINERS: Add ARM U8500 Stephan Gerhold
2020-01-06  1:50   ` Linus Walleij
2020-01-23 21:58   ` Tom Rini
2020-01-04 17:45 ` [RFC PATCH 5/5] board: Add new Samsung "stemmy" board based on ST-Ericsson U8500 Stephan Gerhold
2020-01-06  1:50   ` Linus Walleij
2020-01-23 21:58   ` Tom Rini
2020-01-22 16:47 ` Stephan Gerhold [this message]
2020-01-22 18:03   ` [RFC PATCH 0/5] arm: Restore minimal support for ST-Ericsson U8500 SoC Tom Rini
2020-01-23 17:56     ` Stephan Gerhold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200122164707.GA883@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.