All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frederic Weisbecker <frederic@kernel.org>
To: Ingo Molnar <mingo@kernel.org>, Peter Zijlstra <peterz@infradead.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Chris Wilson <chris@chris-wilson.co.uk>,
	Frederic Weisbecker <frederic@kernel.org>
Subject: [PATCH] sched/vtime: Prevent unstable evaluation of WARN(vtime->state)
Date: Thu, 23 Jan 2020 19:08:49 +0100	[thread overview]
Message-ID: <20200123180849.28486-1-frederic@kernel.org> (raw)

From: Chris Wilson <chris@chris-wilson.co.uk>

As the vtime is sampled under loose seqcount protection by kcpustat, the
vtime fields may change as the code flows. Where logic dictates a field
has a static value, use a READ_ONCE.

Fixes: 74722bb223d0 ("sched/vtime: Bring up complete kcpustat accessor")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
---
 kernel/sched/cputime.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index d43318a489f2..df3577149d2e 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -912,8 +912,10 @@ void task_cputime(struct task_struct *t, u64 *utime, u64 *stime)
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 }
 
-static int vtime_state_check(struct vtime *vtime, int cpu)
+static int vtime_state_fetch(struct vtime *vtime, int cpu)
 {
+	int state = READ_ONCE(vtime->state);
+
 	/*
 	 * We raced against a context switch, fetch the
 	 * kcpustat task again.
@@ -930,10 +932,10 @@ static int vtime_state_check(struct vtime *vtime, int cpu)
 	 *
 	 * Case 1) is ok but 2) is not. So wait for a safe VTIME state.
 	 */
-	if (vtime->state == VTIME_INACTIVE)
+	if (state == VTIME_INACTIVE)
 		return -EAGAIN;
 
-	return 0;
+	return state;
 }
 
 static u64 kcpustat_user_vtime(struct vtime *vtime)
@@ -952,14 +954,15 @@ static int kcpustat_field_vtime(u64 *cpustat,
 {
 	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
-	int err;
 
 	do {
+		int state;
+
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		err = vtime_state_check(vtime, cpu);
-		if (err < 0)
-			return err;
+		state = vtime_state_fetch(vtime, cpu);
+		if (state < 0)
+			return state;
 
 		*val = cpustat[usage];
 
@@ -972,7 +975,7 @@ static int kcpustat_field_vtime(u64 *cpustat,
 		 */
 		switch (usage) {
 		case CPUTIME_SYSTEM:
-			if (vtime->state == VTIME_SYS)
+			if (state == VTIME_SYS)
 				*val += vtime->stime + vtime_delta(vtime);
 			break;
 		case CPUTIME_USER:
@@ -984,11 +987,11 @@ static int kcpustat_field_vtime(u64 *cpustat,
 				*val += kcpustat_user_vtime(vtime);
 			break;
 		case CPUTIME_GUEST:
-			if (vtime->state == VTIME_GUEST && task_nice(tsk) <= 0)
+			if (state == VTIME_GUEST && task_nice(tsk) <= 0)
 				*val += vtime->gtime + vtime_delta(vtime);
 			break;
 		case CPUTIME_GUEST_NICE:
-			if (vtime->state == VTIME_GUEST && task_nice(tsk) > 0)
+			if (state == VTIME_GUEST && task_nice(tsk) > 0)
 				*val += vtime->gtime + vtime_delta(vtime);
 			break;
 		default:
@@ -1039,23 +1042,23 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 {
 	struct vtime *vtime = &tsk->vtime;
 	unsigned int seq;
-	int err;
 
 	do {
 		u64 *cpustat;
 		u64 delta;
+		int state;
 
 		seq = read_seqcount_begin(&vtime->seqcount);
 
-		err = vtime_state_check(vtime, cpu);
-		if (err < 0)
-			return err;
+		state = vtime_state_fetch(vtime, cpu);
+		if (state < 0)
+			return state;
 
 		*dst = *src;
 		cpustat = dst->cpustat;
 
 		/* Task is sleeping, dead or idle, nothing to add */
-		if (vtime->state < VTIME_SYS)
+		if (state < VTIME_SYS)
 			continue;
 
 		delta = vtime_delta(vtime);
@@ -1064,15 +1067,15 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		 * Task runs either in user (including guest) or kernel space,
 		 * add pending nohz time to the right place.
 		 */
-		if (vtime->state == VTIME_SYS) {
+		if (state == VTIME_SYS) {
 			cpustat[CPUTIME_SYSTEM] += vtime->stime + delta;
-		} else if (vtime->state == VTIME_USER) {
+		} else if (state == VTIME_USER) {
 			if (task_nice(tsk) > 0)
 				cpustat[CPUTIME_NICE] += vtime->utime + delta;
 			else
 				cpustat[CPUTIME_USER] += vtime->utime + delta;
 		} else {
-			WARN_ON_ONCE(vtime->state != VTIME_GUEST);
+			WARN_ON_ONCE(state != VTIME_GUEST);
 			if (task_nice(tsk) > 0) {
 				cpustat[CPUTIME_GUEST_NICE] += vtime->gtime + delta;
 				cpustat[CPUTIME_NICE] += vtime->gtime + delta;
@@ -1083,7 +1086,7 @@ static int kcpustat_cpu_fetch_vtime(struct kernel_cpustat *dst,
 		}
 	} while (read_seqcount_retry(&vtime->seqcount, seq));
 
-	return err;
+	return 0;
 }
 
 void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu)
-- 
2.25.0


             reply	other threads:[~2020-01-23 18:08 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-23 18:08 Frederic Weisbecker [this message]
2020-02-14 16:23 ` [PATCH] sched/vtime: Prevent unstable evaluation of WARN(vtime->state) Frederic Weisbecker
2020-02-27 13:34 ` Frederic Weisbecker
2020-03-06 14:42 ` [tip: sched/core] " tip-bot2 for Chris Wilson
  -- strict thread matches above, loose matches on Subject: below --
2019-12-30  1:08 [PATCH 2/6] sched/vtime: Bring up complete kcpustat accessor Frederic Weisbecker
2019-12-30  9:04 ` [PATCH] sched/vtime: Prevent unstable evaluation of WARN(vtime->state) Chris Wilson
2019-12-30 17:39   ` Frederic Weisbecker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200123180849.28486-1-frederic@kernel.org \
    --to=frederic@kernel.org \
    --cc=chris@chris-wilson.co.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.