From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v2 11/21] clk: imx: add i.IMXRT1050 clk driver
Date: Tue, 28 Jan 2020 09:23:34 +0100 [thread overview]
Message-ID: <20200128092334.62e094fc@jawa> (raw)
In-Reply-To: <20200110144711.81938-12-giulio.benetti@benettiengineering.com>
Hi Giulio,
> Add i.MXRT1050 clk driver support.
>
Acked-by: Lukasz Majewski <lukma@denx.de>
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> ---
> drivers/clk/imx/Kconfig | 16 ++
> drivers/clk/imx/Makefile | 2 +
> drivers/clk/imx/clk-imxrt1050.c | 292
> ++++++++++++++++++++ include/dt-bindings/clock/imxrt1050-clock.h |
> 65 +++++ 4 files changed, 375 insertions(+)
> create mode 100644 drivers/clk/imx/clk-imxrt1050.c
> create mode 100644 include/dt-bindings/clock/imxrt1050-clock.h
>
> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> index 2f149ff6f8..059bc2fbb9 100644
> --- a/drivers/clk/imx/Kconfig
> +++ b/drivers/clk/imx/Kconfig
> @@ -68,3 +68,19 @@ config CLK_IMX8MP
> select CLK_CCF
> help
> This enables support clock driver for i.MX8MP platforms.
> +
> +config SPL_CLK_IMXRT1050
> + bool "SPL clock support for i.MXRT1050"
> + depends on ARCH_IMXRT && SPL
> + select SPL_CLK
> + select SPL_CLK_CCF
> + help
> + This enables SPL DM/DTS support for clock driver in
> i.MXRT1050 +
> +config CLK_IMXRT1050
> + bool "Clock support for i.MXRT1050"
> + depends on ARCH_IMXRT
> + select CLK
> + select CLK_CCF
> + help
> + This enables support clock driver for i.MXRT1050 platforms.
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
> index 255a87b18e..1e8a49d0f3 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -16,3 +16,5 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o
> clk-pll14xx.o \ clk-composite-8m.o
> obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \
> clk-composite-8m.o
> +
> +obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o
> diff --git a/drivers/clk/imx/clk-imxrt1050.c
> b/drivers/clk/imx/clk-imxrt1050.c new file mode 100644
> index 0000000000..44ca52c013
> --- /dev/null
> +++ b/drivers/clk/imx/clk-imxrt1050.c
> @@ -0,0 +1,292 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright(C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/imx-regs.h>
> +#include <dt-bindings/clock/imxrt1050-clock.h>
> +
> +#include "clk.h"
> +
> +static ulong imxrt1050_clk_get_rate(struct clk *clk)
> +{
> + struct clk *c;
> + int ret;
> +
> + debug("%s(#%lu)\n", __func__, clk->id);
> +
> + ret = clk_get_by_id(clk->id, &c);
> + if (ret)
> + return ret;
> +
> + return clk_get_rate(c);
> +}
> +
> +static ulong imxrt1050_clk_set_rate(struct clk *clk, ulong rate)
> +{
> + struct clk *c;
> + int ret;
> +
> + debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
> +
> + ret = clk_get_by_id(clk->id, &c);
> + if (ret)
> + return ret;
> +
> + return clk_set_rate(c, rate);
> +}
> +
> +static int __imxrt1050_clk_enable(struct clk *clk, bool enable)
> +{
> + struct clk *c;
> + int ret;
> +
> + debug("%s(#%lu) en: %d\n", __func__, clk->id, enable);
> +
> + ret = clk_get_by_id(clk->id, &c);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + ret = clk_enable(c);
> + else
> + ret = clk_disable(c);
> +
> + return ret;
> +}
> +
> +static int imxrt1050_clk_disable(struct clk *clk)
> +{
> + return __imxrt1050_clk_enable(clk, 0);
> +}
> +
> +static int imxrt1050_clk_enable(struct clk *clk)
> +{
> + return __imxrt1050_clk_enable(clk, 1);
> +}
> +
> +static struct clk_ops imxrt1050_clk_ops = {
> + .set_rate = imxrt1050_clk_set_rate,
> + .get_rate = imxrt1050_clk_get_rate,
> + .enable = imxrt1050_clk_enable,
> + .disable = imxrt1050_clk_disable,
> +};
> +
> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
> +static const char * const pll1_bypass_sels[] = {"pll1_arm",
> "pll1_arm_ref_sel", }; +static const char * const pll2_bypass_sels[]
> = {"pll2_sys", "pll2_sys_ref_sel", }; +static const char * const
> pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
> +static const char * const pll5_bypass_sels[] = {"pll5_video",
> "pll5_video_ref_sel", }; + +static const char *const
> pre_periph_sels[] = { "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m",
> "arm_podf", }; +static const char *const periph_sels[] = {
> "pre_periph_sel", "todo", }; +static const char *const usdhc_sels[] =
> { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *const
> lpuart_sels[] = { "pll3_80m", "osc", }; +static const char *const
> semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; +static
> const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
> +static const char *const lcdif_sels[] = { "pll2_sys",
> "pll3_pfd3_454_74m", "pll5_video:", "pll2_pfd0_352m",
> "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; + +static int
> imxrt1050_clk_probe(struct udevice *dev) +{
> + void *base;
> +
> + /* Anatop clocks */
> + base = (void *)ANATOP_BASE_ADDR;
> +
> + clk_dm(IMXRT1050_CLK_PLL1_REF_SEL,
> + imx_clk_mux("pll1_arm_ref_sel", base + 0x0, 14, 2,
> + pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> + clk_dm(IMXRT1050_CLK_PLL2_REF_SEL,
> + imx_clk_mux("pll2_sys_ref_sel", base + 0x30, 14, 2,
> + pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> + clk_dm(IMXRT1050_CLK_PLL3_REF_SEL,
> + imx_clk_mux("pll3_usb_otg_ref_sel", base + 0x10, 14,
> 2,
> + pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> + clk_dm(IMXRT1050_CLK_PLL5_REF_SEL,
> + imx_clk_mux("pll5_video_ref_sel", base + 0xa0, 14, 2,
> + pll_ref_sels, ARRAY_SIZE(pll_ref_sels)));
> +
> + clk_dm(IMXRT1050_CLK_PLL1_ARM,
> + imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm",
> "pll1_arm_ref_sel",
> + base + 0x0, 0x7f));
> + clk_dm(IMXRT1050_CLK_PLL2_SYS,
> + imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
> "pll2_sys_ref_sel",
> + base + 0x30, 0x1));
> + clk_dm(IMXRT1050_CLK_PLL3_USB_OTG,
> + imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
> + "pll3_usb_otg_ref_sel",
> + base + 0x10, 0x1));
> + clk_dm(IMXRT1050_CLK_PLL5_VIDEO,
> + imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video",
> "pll5_video_ref_sel",
> + base + 0xa0, 0x7f));
> +
> + /* PLL bypass out */
> + clk_dm(IMXRT1050_CLK_PLL1_BYPASS,
> + imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1,
> + pll1_bypass_sels,
> + ARRAY_SIZE(pll1_bypass_sels),
> + CLK_SET_RATE_PARENT));
> + clk_dm(IMXRT1050_CLK_PLL2_BYPASS,
> + imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1,
> + pll2_bypass_sels,
> + ARRAY_SIZE(pll2_bypass_sels),
> + CLK_SET_RATE_PARENT));
> + clk_dm(IMXRT1050_CLK_PLL3_BYPASS,
> + imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1,
> + pll3_bypass_sels,
> + ARRAY_SIZE(pll3_bypass_sels),
> + CLK_SET_RATE_PARENT));
> + clk_dm(IMXRT1050_CLK_PLL5_BYPASS,
> + imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
> + pll5_bypass_sels,
> + ARRAY_SIZE(pll5_bypass_sels),
> + CLK_SET_RATE_PARENT));
> +
> + clk_dm(IMXRT1050_CLK_VIDEO_POST_DIV_SEL,
> + imx_clk_divider("video_post_div_sel", "pll5_video",
> + base + 0xa0, 19, 2));
> + clk_dm(IMXRT1050_CLK_VIDEO_DIV,
> + imx_clk_divider("video_div", "video_post_div_sel",
> + base + 0x170, 30, 2));
> +
> + clk_dm(IMXRT1050_CLK_PLL3_80M,
> + imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg",
> 1, 6)); +
> + clk_dm(IMXRT1050_CLK_PLL2_PFD0_352M,
> + imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base +
> 0x100, 0));
> + clk_dm(IMXRT1050_CLK_PLL2_PFD1_594M,
> + imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base +
> 0x100, 1));
> + clk_dm(IMXRT1050_CLK_PLL2_PFD2_396M,
> + imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base +
> 0x100, 2));
> + clk_dm(IMXRT1050_CLK_PLL3_PFD1_664_62M,
> + imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base
> + 0xf0,
> + 1));
> + clk_dm(IMXRT1050_CLK_PLL3_PFD3_454_74M,
> + imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base
> + 0xf0,
> + 3));
> +
> + /* CCM clocks */
> + base = dev_read_addr_ptr(dev);
> + if (base == (void *)FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + clk_dm(IMXRT1050_CLK_ARM_PODF,
> + imx_clk_divider("arm_podf", "pll1_arm",
> + base + 0x10, 0, 3));
> +
> + clk_dm(IMXRT1050_CLK_PRE_PERIPH_SEL,
> + imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2,
> + pre_periph_sels,
> ARRAY_SIZE(pre_periph_sels)));
> + clk_dm(IMXRT1050_CLK_PERIPH_SEL,
> + imx_clk_mux("periph_sel", base + 0x14, 25, 1,
> + periph_sels, ARRAY_SIZE(periph_sels)));
> + clk_dm(IMXRT1050_CLK_USDHC1_SEL,
> + imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1,
> + usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> + clk_dm(IMXRT1050_CLK_USDHC2_SEL,
> + imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1,
> + usdhc_sels, ARRAY_SIZE(usdhc_sels)));
> + clk_dm(IMXRT1050_CLK_LPUART_SEL,
> + imx_clk_mux("lpuart_sel", base + 0x24, 6, 1,
> + lpuart_sels, ARRAY_SIZE(lpuart_sels)));
> + clk_dm(IMXRT1050_CLK_SEMC_ALT_SEL,
> + imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1,
> + semc_alt_sels,
> ARRAY_SIZE(semc_alt_sels)));
> + clk_dm(IMXRT1050_CLK_SEMC_SEL,
> + imx_clk_mux("semc_sel", base + 0x14, 6, 1,
> + semc_sels, ARRAY_SIZE(semc_sels)));
> + clk_dm(IMXRT1050_CLK_LCDIF_SEL,
> + imx_clk_mux("lcdif_sel", base + 0x38, 15, 3,
> + lcdif_sels, ARRAY_SIZE(lcdif_sels)));
> +
> + clk_dm(IMXRT1050_CLK_AHB_PODF,
> + imx_clk_divider("ahb_podf", "periph_sel",
> + base + 0x14, 10, 3));
> + clk_dm(IMXRT1050_CLK_USDHC1_PODF,
> + imx_clk_divider("usdhc1_podf", "usdhc1_sel",
> + base + 0x24, 11, 3));
> + clk_dm(IMXRT1050_CLK_USDHC2_PODF,
> + imx_clk_divider("usdhc2_podf", "usdhc2_sel",
> + base + 0x24, 16, 3));
> + clk_dm(IMXRT1050_CLK_LPUART_PODF,
> + imx_clk_divider("lpuart_podf", "lpuart_sel",
> + base + 0x24, 0, 6));
> + clk_dm(IMXRT1050_CLK_SEMC_PODF,
> + imx_clk_divider("semc_podf", "semc_sel",
> + base + 0x14, 16, 3));
> + clk_dm(IMXRT1050_CLK_LCDIF_PRED,
> + imx_clk_divider("lcdif_pred", "lcdif_sel",
> + base + 0x38, 12, 3));
> + clk_dm(IMXRT1050_CLK_LCDIF_PODF,
> + imx_clk_divider("lcdif_podf", "lcdif_pred",
> + base + 0x18, 23, 3));
> +
> + clk_dm(IMXRT1050_CLK_USDHC1,
> + imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80,
> 2));
> + clk_dm(IMXRT1050_CLK_USDHC2,
> + imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80,
> 4));
> + clk_dm(IMXRT1050_CLK_LPUART1,
> + imx_clk_gate2("lpuart1", "lpuart_podf", base + 0x7c,
> 24));
> + clk_dm(IMXRT1050_CLK_SEMC,
> + imx_clk_gate2("semc", "semc_podf", base + 0x74, 4));
> + clk_dm(IMXRT1050_CLK_LCDIF,
> + imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70,
> 28)); +
> +#ifdef CONFIG_SPL_BUILD
> + struct clk *clk, *clk1;
> +
> + /* bypass pll1 before setting its rate */
> + clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
> + clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> + clk_set_parent(clk1, clk);
> +
> + clk_get_by_id(IMXRT1050_CLK_PLL1_ARM, &clk);
> + clk_enable(clk);
> + clk_set_rate(clk, 1056000000UL);
> +
> + clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> + clk_set_parent(clk1, clk);
> +
> + clk_get_by_id(IMXRT1050_CLK_SEMC_SEL, &clk1);
> + clk_get_by_id(IMXRT1050_CLK_SEMC_ALT_SEL, &clk);
> + clk_set_parent(clk1, clk);
> +
> + clk_get_by_id(IMXRT1050_CLK_PLL2_SYS, &clk);
> + clk_enable(clk);
> + clk_set_rate(clk, 528000000UL);
> +
> + clk_get_by_id(IMXRT1050_CLK_PLL2_BYPASS, &clk1);
> + clk_set_parent(clk1, clk);
> +
> + /* Configure PLL3_USB_OTG to 480MHz */
> + clk_get_by_id(IMXRT1050_CLK_PLL3_USB_OTG, &clk);
> + clk_enable(clk);
> + clk_set_rate(clk, 480000000UL);
> +
> + clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1);
> + clk_set_parent(clk1, clk);
> +
> +#endif
> +
> + return 0;
> +}
> +
> +static const struct udevice_id imxrt1050_clk_ids[] = {
> + { .compatible = "fsl,imxrt1050-ccm" },
> + { },
> +};
> +
> +U_BOOT_DRIVER(imxrt1050_clk) = {
> + .name = "clk_imxrt1050",
> + .id = UCLASS_CLK,
> + .of_match = imxrt1050_clk_ids,
> + .ops = &imxrt1050_clk_ops,
> + .probe = imxrt1050_clk_probe,
> + .flags = DM_FLAG_PRE_RELOC,
> +};
> diff --git a/include/dt-bindings/clock/imxrt1050-clock.h
> b/include/dt-bindings/clock/imxrt1050-clock.h new file mode 100644
> index 0000000000..c174f90c1a
> --- /dev/null
> +++ b/include/dt-bindings/clock/imxrt1050-clock.h
> @@ -0,0 +1,65 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright(C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_IMXRT1050_H
> +#define __DT_BINDINGS_CLOCK_IMXRT1050_H
> +
> +#define IMXRT1050_CLK_DUMMY 0
> +#define IMXRT1050_CLK_CKIL 1
> +#define IMXRT1050_CLK_CKIH 2
> +#define IMXRT1050_CLK_OSC 3
> +#define IMXRT1050_CLK_PLL2_PFD0_352M 4
> +#define IMXRT1050_CLK_PLL2_PFD1_594M 5
> +#define IMXRT1050_CLK_PLL2_PFD2_396M 6
> +#define IMXRT1050_CLK_PLL3_PFD0_720M 7
> +#define IMXRT1050_CLK_PLL3_PFD1_664_62M 8
> +#define IMXRT1050_CLK_PLL3_PFD2_508_24M 9
> +#define IMXRT1050_CLK_PLL3_PFD3_454_74M 10
> +#define IMXRT1050_CLK_PLL2_198M 11
> +#define IMXRT1050_CLK_PLL3_120M 12
> +#define IMXRT1050_CLK_PLL3_80M 13
> +#define IMXRT1050_CLK_PLL3_60M 14
> +#define IMXRT1050_CLK_PLL1_BYPASS 15
> +#define IMXRT1050_CLK_PLL2_BYPASS 16
> +#define IMXRT1050_CLK_PLL3_BYPASS 17
> +#define IMXRT1050_CLK_PLL5_BYPASS 19
> +#define IMXRT1050_CLK_PLL1_REF_SEL 20
> +#define IMXRT1050_CLK_PLL2_REF_SEL 21
> +#define IMXRT1050_CLK_PLL3_REF_SEL 22
> +#define IMXRT1050_CLK_PLL5_REF_SEL 23
> +#define IMXRT1050_CLK_PRE_PERIPH_SEL 24
> +#define IMXRT1050_CLK_PERIPH_SEL 25
> +#define IMXRT1050_CLK_SEMC_ALT_SEL 26
> +#define IMXRT1050_CLK_SEMC_SEL 27
> +#define IMXRT1050_CLK_USDHC1_SEL 28
> +#define IMXRT1050_CLK_USDHC2_SEL 29
> +#define IMXRT1050_CLK_LPUART_SEL 30
> +#define IMXRT1050_CLK_LCDIF_SEL 31
> +#define IMXRT1050_CLK_VIDEO_POST_DIV_SEL 32
> +#define IMXRT1050_CLK_VIDEO_DIV 33
> +#define IMXRT1050_CLK_ARM_PODF 34
> +#define IMXRT1050_CLK_LPUART_PODF 35
> +#define IMXRT1050_CLK_USDHC1_PODF 36
> +#define IMXRT1050_CLK_USDHC2_PODF 37
> +#define IMXRT1050_CLK_SEMC_PODF 38
> +#define IMXRT1050_CLK_AHB_PODF 39
> +#define IMXRT1050_CLK_LCDIF_PRED 40
> +#define IMXRT1050_CLK_LCDIF_PODF 41
> +#define IMXRT1050_CLK_USDHC1 42
> +#define IMXRT1050_CLK_USDHC2 43
> +#define IMXRT1050_CLK_LPUART1 44
> +#define IMXRT1050_CLK_SEMC 45
> +#define IMXRT1050_CLK_LCDIF 46
> +#define IMXRT1050_CLK_PLL1_ARM 47
> +#define IMXRT1050_CLK_PLL2_SYS 48
> +#define IMXRT1050_CLK_PLL3_USB_OTG 49
> +#define IMXRT1050_CLK_PLL4_AUDIO 50
> +#define IMXRT1050_CLK_PLL5_VIDEO 51
> +#define IMXRT1050_CLK_PLL6_ENET 52
> +#define IMXRT1050_CLK_PLL7_USB_HOST 53
> +#define IMXRT1050_CLK_END 54
> +
> +#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200128/213fa25b/attachment.sig>
next prev parent reply other threads:[~2020-01-28 8:23 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-10 14:46 [PATCH v2 00/21] Add i.MXRT family support Giulio Benetti
2020-01-10 14:46 ` [PATCH v2 01/21] spl: fix entry_point equal to load_addr Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:09 ` Lukasz Majewski
2020-01-28 16:37 ` Giulio Benetti
2020-01-29 8:33 ` Lukasz Majewski
2020-01-10 14:46 ` [PATCH v2 02/21] armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibility Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:10 ` Lukasz Majewski
2020-01-28 16:50 ` Giulio Benetti
2020-01-29 8:36 ` Lukasz Majewski
2020-01-10 14:46 ` [PATCH v2 03/21] clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocks Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-10 14:46 ` [PATCH v2 04/21] clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USB Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-10 14:46 ` [PATCH v2 05/21] clk: imx: pllv3: add enable() support Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:14 ` Lukasz Majewski
2020-01-28 18:46 ` Giulio Benetti
2020-01-10 14:46 ` [PATCH v2 06/21] clk: imx: pllv3: add disable() support Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-10 14:46 ` [PATCH v2 07/21] clk: imx: pllv3: add set_rate() support Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-10 14:46 ` [PATCH v2 08/21] clk: imx: pllv3: add PLLV3_SYS support Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-10 14:46 ` [PATCH v2 09/21] clk: imx: pllv3: add support for PLLV3_AV type Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:20 ` Lukasz Majewski
2020-01-31 13:50 ` Giulio Benetti
2020-01-10 14:47 ` [PATCH v2 10/21] clk: imx: pfd: add set_rate() Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-10 14:47 ` [PATCH v2 11/21] clk: imx: add i.IMXRT1050 clk driver Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:23 ` Lukasz Majewski [this message]
2020-01-10 14:47 ` [PATCH v2 12/21] pinctrl: add i.MXRT driver Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-28 8:27 ` Lukasz Majewski
2020-01-10 14:47 ` [PATCH v2 13/21] gpio: mxc_gpio: add support for i.MXRT1050 Giulio Benetti
2020-01-15 12:46 ` sbabic at denx.de
2020-01-28 8:27 ` Lukasz Majewski
2020-01-10 14:47 ` [PATCH v2 14/21] ARM: dts: imxrt1050: add dtsi file Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-28 8:31 ` Lukasz Majewski
2020-01-28 18:48 ` Giulio Benetti
2020-01-10 14:47 ` [PATCH v2 15/21] serial_lpuart: add clock enable if CONFIG_CLK is defined Giulio Benetti
2020-01-15 12:47 ` sbabic at denx.de
2020-01-28 8:36 ` Lukasz Majewski
2020-01-28 18:49 ` Giulio Benetti
2020-01-31 13:39 ` [PATCH] serial_lpuart: make clock failure less verbose Giulio Benetti
2020-01-31 18:14 ` Simon Glass
2020-01-31 20:24 ` Giulio Benetti
2020-02-01 12:48 ` Lukasz Majewski
2020-02-10 22:17 ` Giulio Benetti
2020-03-10 15:31 ` sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200128092334.62e094fc@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.