From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 5/9] drm/i915: split i915_driver_modeset_probe() to pre/post irq install
Date: Tue, 4 Feb 2020 16:53:41 +0200 [thread overview]
Message-ID: <20200204145341.GU13686@intel.com> (raw)
In-Reply-To: <2b2cba799bbab1b63f6fe342db3c5bdbacc1cebf.1580823606.git.jani.nikula@intel.com>
On Tue, Feb 04, 2020 at 03:42:24PM +0200, Jani Nikula wrote:
> Pair the irq install and uninstall in the same layer. There are no
> functional changes in the happy day scenario. The cleanup paths are
> currently a mess though.
>
> Note that modeset probe pre-irq + post-irq install are matched by
> modeset driver remove pre-irq + post-irq uninstall, together, but not
> independently. They are not symmetric pairs.
>
> v2: don't add a new probe failure point here
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 40 ++++++++++++++++++++++-----------
> 1 file changed, 27 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 2ef4b8fc5f4c..1243638506bc 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -272,7 +272,8 @@ intel_teardown_mchbar(struct drm_i915_private *dev_priv)
> release_resource(&dev_priv->mch_res);
> }
>
> -static int i915_driver_modeset_probe(struct drm_i915_private *i915)
> +/* part #1: call before irq install */
> +static int i915_driver_modeset_probe_noirq(struct drm_i915_private *i915)
> {
> int ret;
>
> @@ -296,15 +297,22 @@ static int i915_driver_modeset_probe(struct drm_i915_private *i915)
>
> intel_csr_ucode_init(i915);
>
> - ret = intel_irq_install(i915);
> - if (ret)
> - goto cleanup_csr;
> + return 0;
> +
> +out:
> + return ret;
> +}
> +
> +/* part #2: call after irq install */
> +static int i915_driver_modeset_probe(struct drm_i915_private *i915)
> +{
> + int ret;
>
> /* Important: The output setup functions called by modeset_init need
> * working irqs for e.g. gmbus and dp aux transfers. */
> ret = intel_modeset_init(i915);
> if (ret)
> - goto cleanup_irq;
> + goto out;
>
> ret = i915_gem_init(i915);
> if (ret)
> @@ -331,16 +339,10 @@ static int i915_driver_modeset_probe(struct drm_i915_private *i915)
> i915_gem_driver_remove(i915);
> i915_gem_driver_release(i915);
> cleanup_modeset:
> + /* FIXME */
> intel_modeset_driver_remove(i915);
> intel_irq_uninstall(i915);
> intel_modeset_driver_remove_noirq(i915);
> - goto cleanup_csr;
> -cleanup_irq:
> - intel_irq_uninstall(i915);
> -cleanup_csr:
> - intel_csr_ucode_fini(i915);
> - intel_power_domains_driver_remove(i915);
> - intel_vga_unregister(i915);
> out:
> return ret;
> }
> @@ -1541,10 +1543,18 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (ret < 0)
> goto out_cleanup_mmio;
>
> - ret = i915_driver_modeset_probe(i915);
> + ret = i915_driver_modeset_probe_noirq(i915);
> if (ret < 0)
> goto out_cleanup_hw;
>
> + ret = intel_irq_install(i915);
> + if (ret)
> + goto out_cleanup_modeset;
> +
> + ret = i915_driver_modeset_probe(i915);
> + if (ret < 0)
> + goto out_cleanup_irq;
> +
> i915_driver_register(i915);
>
> enable_rpm_wakeref_asserts(&i915->runtime_pm);
> @@ -1553,6 +1563,10 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> return 0;
>
> +out_cleanup_irq:
> + intel_irq_uninstall(i915);
> +out_cleanup_modeset:
> + /* FIXME */
Waiting for a mysterious cleanup_noirq() I guess.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> out_cleanup_hw:
> i915_driver_hw_remove(i915);
> intel_memory_regions_driver_release(i915);
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-02-04 14:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-04 13:42 [Intel-gfx] [PATCH 0/9] drm/i915: modeset probe/remove cleanup, again Jani Nikula
2020-02-04 13:42 ` [Intel-gfx] [PATCH 1/9] drm/i915: register vga switcheroo later, unregister earlier Jani Nikula
2020-02-04 13:42 ` [Intel-gfx] [PATCH 2/9] drm/i915: switch i915_driver_probe() to use i915 local variable Jani Nikula
2020-02-04 13:42 ` [Intel-gfx] [PATCH 3/9] drm/i915: split intel_modeset_driver_remove() to pre/post irq uninstall Jani Nikula
2020-02-04 14:46 ` Ville Syrjälä
2020-02-04 13:42 ` [Intel-gfx] [PATCH 4/9] drm/i915: split i915_driver_modeset_remove() " Jani Nikula
2020-02-04 14:49 ` Ville Syrjälä
2020-02-04 13:42 ` [Intel-gfx] [PATCH 5/9] drm/i915: split i915_driver_modeset_probe() to pre/post irq install Jani Nikula
2020-02-04 14:53 ` Ville Syrjälä [this message]
2020-02-04 13:42 ` [Intel-gfx] [PATCH 6/9] drm/i915: split intel_modeset_init() " Jani Nikula
2020-02-04 14:59 ` Ville Syrjälä
2020-02-04 13:42 ` [Intel-gfx] [PATCH 7/9] drm/i915: split intel_modeset_init() pre/post gem init Jani Nikula
2020-02-04 15:05 ` Ville Syrjälä
2020-02-04 13:42 ` [Intel-gfx] [PATCH 8/9] drm/i915: move more display related probe/remove stuff to display Jani Nikula
2020-02-04 15:11 ` Ville Syrjälä
2020-02-04 13:42 ` [Intel-gfx] [PATCH 9/9] drm/i915: remove the now redundant i915_driver_modeset_* call layer Jani Nikula
2020-02-04 15:16 ` Ville Syrjälä
2020-02-05 1:42 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: modeset probe/remove cleanup, again Patchwork
2020-02-05 2:05 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200204145341.GU13686@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.