From mboxrd@z Thu Jan 1 00:00:00 1970 From: Changming Huang Date: Wed, 5 Feb 2020 18:52:26 +0800 Subject: [Buildroot] [PATCH v4 8/9] package/nxp/qoriq-rcw: introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for boot mode In-Reply-To: <20200205105227.13698-1-jerry.huang@nxp.com> References: <20200205105227.13698-1-jerry.huang@nxp.com> Message-ID: <20200205105227.13698-8-jerry.huang@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Introduce BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE for the boot mode. Because the RCW binary can be stored in different media, for example: sd - RCW locate in SD card, boot the board from SD card emmc - RCW locate in eMMC chip, boot the board from eMMC chip qspi - RCW locate in QSPI flash, boot the board from QSPI flash flexspi_nor - RCW locate in flexSPI, boot the board from flexSPI Nor/Nand flash Signed-off-by: Changming Huang --- changes since v3: 1. split this option from board patch. --- package/nxp/qoriq-rcw/Config.in.host | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/package/nxp/qoriq-rcw/Config.in.host b/package/nxp/qoriq-rcw/Config.in.host index 9bf55894e8..7f5fbb3202 100644 --- a/package/nxp/qoriq-rcw/Config.in.host +++ b/package/nxp/qoriq-rcw/Config.in.host @@ -37,4 +37,10 @@ config BR2_PACKAGE_HOST_QORIQ_RCW_BIN If this option is empty, no rcw file is used. +config BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE + string "QorIQ RCW Boot mode" + depends on !BR2_PACKAGE_HOST_QORIQ_RCW_CUSTOM_PATH + help + Specify the boot mode, for example, sd, emmc, flexspi_nor. + endif -- 2.17.1