From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 2/5] staging: iio: adc: ad7192: modify iio_chan_spec array
Date: Fri, 14 Feb 2020 15:47:48 +0000 [thread overview]
Message-ID: <20200214154748.3f977906@archlinux> (raw)
In-Reply-To: <20200212161721.16200-3-alexandru.tachici@analog.com>
On Wed, 12 Feb 2020 18:17:18 +0200
Alexandru Tachici <alexandru.tachici@analog.com> wrote:
> This patch changes the static const struct iio_chan_spec arrays
> in a way that all the necessary attributes are set at
> compile time. Now ad7192_channels_config only makes the
> channels attribute of iio_dev point to the right array depending
> on the chip.
>
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Applied, thanks
> ---
> drivers/staging/iio/adc/ad7192.c | 112 ++++++++++++++++++-------------
> 1 file changed, 66 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
> index 41da8b4cdc48..8fca8915543d 100644
> --- a/drivers/staging/iio/adc/ad7192.c
> +++ b/drivers/staging/iio/adc/ad7192.c
> @@ -786,73 +786,93 @@ static const struct iio_info ad7195_info = {
> .validate_trigger = ad_sd_validate_trigger,
> };
>
> +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \
> + _type, _mask_type_av, _ext_info) \
> + { \
> + .type = (_type), \
> + .differential = ((_channel2) == -1 ? 0 : 1), \
> + .indexed = 1, \
> + .channel = (_channel1), \
> + .channel2 = (_channel2), \
> + .address = (_address), \
> + .extend_name = (_extend_name), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_OFFSET), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
> + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
> + .info_mask_shared_by_type_available = (_mask_type_av), \
> + .ext_info = (_ext_info), \
> + .scan_index = (_si), \
> + .scan_type = { \
> + .sign = 'u', \
> + .realbits = 24, \
> + .storagebits = 32, \
> + .endianness = IIO_BE, \
> + }, \
> + }
> +
> +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
> + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \
> + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \
> + ad7192_calibsys_ext_info)
> +
> +#define AD719x_CHANNEL(_si, _channel1, _address) \
> + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
> +
> +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \
> + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \
> + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
> +
> +#define AD719x_TEMP_CHANNEL(_si, _address) \
> + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL)
> +
> static const struct iio_chan_spec ad7192_channels[] = {
> - AD_SD_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M, 24, 32, 0),
> - AD_SD_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M, 24, 32, 0),
> - AD_SD_TEMP_CHANNEL(2, AD7192_CH_TEMP, 24, 32, 0),
> - AD_SD_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M, 24, 32, 0),
> - AD_SD_CHANNEL(4, 1, AD7192_CH_AIN1, 24, 32, 0),
> - AD_SD_CHANNEL(5, 2, AD7192_CH_AIN2, 24, 32, 0),
> - AD_SD_CHANNEL(6, 3, AD7192_CH_AIN3, 24, 32, 0),
> - AD_SD_CHANNEL(7, 4, AD7192_CH_AIN4, 24, 32, 0),
> + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
> + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M),
> + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP),
> + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M),
> + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1),
> + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2),
> + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3),
> + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4),
> IIO_CHAN_SOFT_TIMESTAMP(8),
> };
>
> static const struct iio_chan_spec ad7193_channels[] = {
> - AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0),
> - AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0),
> - AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0),
> - AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0),
> - AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0),
> - AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0),
> - AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0),
> - AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0),
> - AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0),
> - AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0),
> - AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0),
> - AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0),
> - AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0),
> - AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0),
> + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
> + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
> + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
> + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
> + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
> + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M),
> + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1),
> + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2),
> + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3),
> + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4),
> + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5),
> + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6),
> + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7),
> + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8),
> IIO_CHAN_SOFT_TIMESTAMP(14),
> };
>
> static int ad7192_channels_config(struct iio_dev *indio_dev)
> {
> struct ad7192_state *st = iio_priv(indio_dev);
> - const struct iio_chan_spec *channels;
> - struct iio_chan_spec *chan;
> - int i;
>
> switch (st->devid) {
> case ID_AD7193:
> - channels = ad7193_channels;
> + indio_dev->channels = ad7193_channels;
> indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
> break;
> default:
> - channels = ad7192_channels;
> + indio_dev->channels = ad7192_channels;
> indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
> break;
> }
>
> - chan = devm_kcalloc(indio_dev->dev.parent, indio_dev->num_channels,
> - sizeof(*chan), GFP_KERNEL);
> - if (!chan)
> - return -ENOMEM;
> -
> - indio_dev->channels = chan;
> -
> - for (i = 0; i < indio_dev->num_channels; i++) {
> - *chan = channels[i];
> - chan->info_mask_shared_by_all |=
> - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY);
> - if (chan->type != IIO_TEMP) {
> - chan->info_mask_shared_by_type_available |=
> - BIT(IIO_CHAN_INFO_SCALE);
> - chan->ext_info = ad7192_calibsys_ext_info;
> - }
> - chan++;
> - }
> -
> return 0;
> }
>
next prev parent reply other threads:[~2020-02-14 18:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 16:17 [PATCH v3 0/5] iio: adc: ad7192: move out of staging Alexandru Tachici
2020-02-12 16:17 ` [PATCH v3 1/5] staging: iio: adc: ad7192: fail probe on get_voltage Alexandru Tachici
2020-02-14 15:40 ` Jonathan Cameron
2020-02-12 16:17 ` [PATCH v3 2/5] staging: iio: adc: ad7192: modify iio_chan_spec array Alexandru Tachici
2020-02-14 15:47 ` Jonathan Cameron [this message]
2020-02-12 16:17 ` [PATCH 3/5] staging: iio: adc: ad7192: removed spi_device_id Alexandru Tachici
2020-02-14 15:48 ` Jonathan Cameron
2020-02-12 16:17 ` [PATCH v3 4/5] Documentation: ABI: testing: ad7192: update sysfs docs Alexandru Tachici
2020-02-14 15:49 ` Jonathan Cameron
2020-02-12 16:17 ` [PATCH v3 5/5] staging: iio: adc: ad7192: move out of staging Alexandru Tachici
2020-02-14 15:50 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214154748.3f977906@archlinux \
--to=jic23@kernel.org \
--cc=alexandru.tachici@analog.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.