From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>, "Kevin Wolf" <kwolf@redhat.com>,
qemu-block@nongnu.org, "Max Reitz" <mreitz@redhat.com>,
"Stefan Hajnoczi" <stefanha@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PATCH 5/5] aio-posix: make AioHandler dispatch O(1) with epoll
Date: Fri, 14 Feb 2020 17:17:12 +0000 [thread overview]
Message-ID: <20200214171712.541358-6-stefanha@redhat.com> (raw)
In-Reply-To: <20200214171712.541358-1-stefanha@redhat.com>
File descriptor monitoring is O(1) with epoll(7), but
aio_dispatch_handlers() still scans all AioHandlers instead of
dispatching just those that are ready. This makes aio_poll() O(n) with
respect to the total number of registered handlers.
Add a local ready_list to aio_poll() so that each nested aio_poll()
builds a list of handlers ready to be dispatched. Since file descriptor
polling is level-triggered, nested aio_poll() calls also see fds that
were ready in the parent but not yet dispatched. This guarantees that
nested aio_poll() invocations will dispatch all fds, even those that
became ready before the nested invocation.
Since only handlers ready to be dispatched are placed onto the
ready_list, the new aio_dispatch_ready_handlers() function provides O(1)
dispatch.
Note that AioContext polling is still O(n) and currently cannot be fully
disabled. This still needs to be fixed before aio_poll() is fully O(1).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
util/aio-posix.c | 106 +++++++++++++++++++++++++++++++++--------------
1 file changed, 76 insertions(+), 30 deletions(-)
diff --git a/util/aio-posix.c b/util/aio-posix.c
index 3a98a2acb9..dc33ca08a6 100644
--- a/util/aio-posix.c
+++ b/util/aio-posix.c
@@ -34,6 +34,7 @@ struct AioHandler
void *opaque;
bool is_external;
QLIST_ENTRY(AioHandler) node;
+ QLIST_ENTRY(AioHandler) node_ready; /* only used during aio_poll() */
QLIST_ENTRY(AioHandler) node_deleted;
};
@@ -104,7 +105,18 @@ static void aio_epoll_update(AioContext *ctx, AioHandler *node, bool is_new)
}
}
-static int aio_epoll(AioContext *ctx, int64_t timeout)
+/* Add a handler to a ready list */
+static void add_ready_handler(AioHandlerList *ready_list,
+ AioHandler *node,
+ int revents)
+{
+ QLIST_SAFE_REMOVE(node, node_ready); /* remove from nested parent's list */
+ node->pfd.revents = revents;
+ QLIST_INSERT_HEAD(ready_list, node, node_ready);
+}
+
+static int aio_epoll(AioContext *ctx, AioHandlerList *ready_list,
+ int64_t timeout)
{
GPollFD pfd = {
.fd = ctx->epollfd,
@@ -129,11 +141,13 @@ static int aio_epoll(AioContext *ctx, int64_t timeout)
}
for (i = 0; i < ret; i++) {
int ev = events[i].events;
+ int revents = (ev & EPOLLIN ? G_IO_IN : 0) |
+ (ev & EPOLLOUT ? G_IO_OUT : 0) |
+ (ev & EPOLLHUP ? G_IO_HUP : 0) |
+ (ev & EPOLLERR ? G_IO_ERR : 0);
+
node = events[i].data.ptr;
- node->pfd.revents = (ev & EPOLLIN ? G_IO_IN : 0) |
- (ev & EPOLLOUT ? G_IO_OUT : 0) |
- (ev & EPOLLHUP ? G_IO_HUP : 0) |
- (ev & EPOLLERR ? G_IO_ERR : 0);
+ add_ready_handler(ready_list, node, revents);
}
}
out:
@@ -437,36 +451,63 @@ static void aio_free_deleted_handlers(AioContext *ctx)
qemu_lockcnt_inc_and_unlock(&ctx->list_lock);
}
-static bool aio_dispatch_handlers(AioContext *ctx)
+static bool aio_dispatch_handler(AioContext *ctx, AioHandler *node)
{
- AioHandler *node, *tmp;
bool progress = false;
+ int revents;
- QLIST_FOREACH_SAFE_RCU(node, &ctx->aio_handlers, node, tmp) {
- int revents;
+ revents = node->pfd.revents & node->pfd.events;
+ node->pfd.revents = 0;
- revents = node->pfd.revents & node->pfd.events;
- node->pfd.revents = 0;
+ if (!QLIST_IS_INSERTED(node, node_deleted) &&
+ (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
+ aio_node_check(ctx, node->is_external) &&
+ node->io_read) {
+ node->io_read(node->opaque);
- if (!QLIST_IS_INSERTED(node, node_deleted) &&
- (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) &&
- aio_node_check(ctx, node->is_external) &&
- node->io_read) {
- node->io_read(node->opaque);
-
- /* aio_notify() does not count as progress */
- if (node->opaque != &ctx->notifier) {
- progress = true;
- }
- }
- if (!QLIST_IS_INSERTED(node, node_deleted) &&
- (revents & (G_IO_OUT | G_IO_ERR)) &&
- aio_node_check(ctx, node->is_external) &&
- node->io_write) {
- node->io_write(node->opaque);
+ /* aio_notify() does not count as progress */
+ if (node->opaque != &ctx->notifier) {
progress = true;
}
}
+ if (!QLIST_IS_INSERTED(node, node_deleted) &&
+ (revents & (G_IO_OUT | G_IO_ERR)) &&
+ aio_node_check(ctx, node->is_external) &&
+ node->io_write) {
+ node->io_write(node->opaque);
+ progress = true;
+ }
+
+ return progress;
+}
+
+/*
+ * If we have a list of ready handlers then this is more efficient than
+ * scanning all handlers with aio_dispatch_handlers().
+ */
+static bool aio_dispatch_ready_handlers(AioContext *ctx,
+ AioHandlerList *ready_list)
+{
+ bool progress = false;
+ AioHandler *node;
+
+ while ((node = QLIST_FIRST(ready_list))) {
+ QLIST_SAFE_REMOVE(node, node_ready);
+ progress = aio_dispatch_handler(ctx, node) || progress;
+ }
+
+ return progress;
+}
+
+/* Slower than aio_dispatch_ready_handlers() but only used via glib */
+static bool aio_dispatch_handlers(AioContext *ctx)
+{
+ AioHandler *node, *tmp;
+ bool progress = false;
+
+ QLIST_FOREACH_SAFE_RCU(node, &ctx->aio_handlers, node, tmp) {
+ progress = aio_dispatch_handler(ctx, node) || progress;
+ }
return progress;
}
@@ -628,6 +669,7 @@ static bool try_poll_mode(AioContext *ctx, int64_t *timeout)
bool aio_poll(AioContext *ctx, bool blocking)
{
+ AioHandlerList ready_list = QLIST_HEAD_INITIALIZER(ready_list);
AioHandler *node;
int i;
int ret = 0;
@@ -678,7 +720,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
/* wait until next event */
if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
npfd = 0; /* pollfds[] is not being used */
- ret = aio_epoll(ctx, timeout);
+ ret = aio_epoll(ctx, &ready_list, timeout);
} else {
ret = qemu_poll_ns(pollfds, npfd, timeout);
}
@@ -733,7 +775,11 @@ bool aio_poll(AioContext *ctx, bool blocking)
/* if we have any readable fds, dispatch event */
if (ret > 0) {
for (i = 0; i < npfd; i++) {
- nodes[i]->pfd.revents = pollfds[i].revents;
+ int revents = pollfds[i].revents;
+
+ if (revents) {
+ add_ready_handler(&ready_list, nodes[i], revents);
+ }
}
}
@@ -742,7 +788,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
progress |= aio_bh_poll(ctx);
if (ret > 0) {
- progress |= aio_dispatch_handlers(ctx);
+ progress |= aio_dispatch_ready_handlers(ctx, &ready_list);
}
aio_free_deleted_handlers(ctx);
--
2.24.1
next prev parent reply other threads:[~2020-02-14 17:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 17:17 [PATCH 0/5] aio-posix: towards an O(1) event loop Stefan Hajnoczi
2020-02-14 17:17 ` [PATCH 1/5] aio-posix: fix use after leaving scope in aio_poll() Stefan Hajnoczi
2020-02-19 7:02 ` Sergio Lopez
2020-02-14 17:17 ` [PATCH 2/5] aio-posix: don't pass ns timeout to epoll_wait() Stefan Hajnoczi
2020-02-19 10:12 ` Sergio Lopez
2020-02-14 17:17 ` [PATCH 3/5] qemu/queue.h: add QLIST_SAFE_REMOVE() Stefan Hajnoczi
2020-02-19 10:30 ` Sergio Lopez
2020-02-14 17:17 ` [PATCH 4/5] aio-posix: make AioHandler deletion O(1) Stefan Hajnoczi
2020-02-19 10:41 ` Sergio Lopez
2020-02-14 17:17 ` Stefan Hajnoczi [this message]
2020-02-19 11:00 ` [PATCH 5/5] aio-posix: make AioHandler dispatch O(1) with epoll Sergio Lopez
2020-02-19 11:13 ` Paolo Bonzini
2020-02-21 12:59 ` Stefan Hajnoczi
2020-02-21 13:06 ` Paolo Bonzini
2020-02-21 14:44 ` Stefan Hajnoczi
2020-02-21 14:47 ` Stefan Hajnoczi
2020-02-21 15:04 ` Paolo Bonzini
2020-02-21 15:29 ` Stefan Hajnoczi
2020-02-21 15:37 ` Paolo Bonzini
2020-02-21 15:29 ` [PATCH 0/5] aio-posix: towards an O(1) event loop Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214171712.541358-6-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=fam@euphon.net \
--cc=kwolf@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.