From: Cyril Hrubis <chrubis@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v7 4/4] syscalls/fsmount01: Add test for fsmount series API
Date: Mon, 17 Feb 2020 14:52:06 +0100 [thread overview]
Message-ID: <20200217135205.GA25504@rei> (raw)
In-Reply-To: <20200217084622.11199-5-pvorel@suse.cz>
Hi!
> diff --git a/testcases/kernel/syscalls/fsmount/fsmount01.c b/testcases/kernel/syscalls/fsmount/fsmount01.c
> new file mode 100644
> index 000000000..464458080
> --- /dev/null
> +++ b/testcases/kernel/syscalls/fsmount/fsmount01.c
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2019 Red Hat, Inc. All rights reserved.
> + * Author: Zorro Lang <zlang@redhat.com>
> + *
> + * Use new mount API from v5.2 (fsopen(), fsconfig(), fsmount(), move_mount())
> + * to mount a filesystem without any specified mount options.
> + */
> +
> +#include <sys/mount.h>
> +
> +#include "tst_test.h"
> +#include "lapi/fcntl.h"
> +#include "lapi/fsmount.h"
> +#include "tst_safe_stdio.h"
> +
> +#define LINELENGTH 256
> +#define MNTPOINT "newmount_point"
> +static int sfd, mfd, is_mounted;
> +
> +static int ismount(char *mntpoint)
> +{
> + int ret = 0;
> + FILE *file;
> + char line[LINELENGTH];
> +
> + file = SAFE_FOPEN("/proc/mounts", "r");
> +
> + while (fgets(line, sizeof(line), file)) {
> + if (strstr(line, mntpoint) != NULL) {
> + ret = 1;
> + break;
> + }
> + }
> + SAFE_FCLOSE(file);
> + return ret;
> +}
> +
> +static void cleanup(void)
> +{
> + if (is_mounted)
> + SAFE_UMOUNT(MNTPOINT);
> +}
> +
> +static void test_fsmount(void)
> +{
> + TEST(fsopen(tst_device->fs_type, FSOPEN_CLOEXEC));
> + if (TST_RET < 0)
> + tst_brk(TBROK | TTERRNO, "fsopen %s", tst_device->fs_type);
> + sfd = TST_RET;
> + tst_res(TPASS, "fsopen %s", tst_device->fs_type);
> +
> + TEST(fsconfig(sfd, FSCONFIG_SET_STRING, "source", tst_device->dev, 0));
> + if (TST_RET < 0)
> + tst_brk(TBROK | TTERRNO,
> + "fsconfig set source to %s", tst_device->dev);
> + tst_res(TPASS, "fsconfig set source to %s", tst_device->dev);
> +
> +
> + TEST(fsconfig(sfd, FSCONFIG_CMD_CREATE, NULL, NULL, 0));
> + if (TST_RET < 0)
> + tst_brk(TBROK | TTERRNO, "fsconfig create superblock");
> + tst_res(TPASS, "fsconfig create superblock");
> +
> + TEST(fsmount(sfd, FSMOUNT_CLOEXEC, 0));
> + if (TST_RET < 0)
> + tst_brk(TBROK | TTERRNO, "fsmount");
> + mfd = TST_RET;
> + tst_res(TPASS, "fsmount");
> + SAFE_CLOSE(sfd);
> +
> + TEST(move_mount(mfd, "", AT_FDCWD, MNTPOINT, MOVE_MOUNT_F_EMPTY_PATH));
> + if (TST_RET < 0)
> + tst_brk(TBROK | TTERRNO, "move_mount attach to mount point");
> + is_mounted = 1;
> + tst_res(TPASS, "move_mount attach to mount point");
> + SAFE_CLOSE(mfd);
> +
> + if (ismount(MNTPOINT)) {
> + tst_res(TPASS, "new mount API works");
> + SAFE_UMOUNT(MNTPOINT);
> + is_mounted = 0;
> + } else
> + tst_res(TFAIL, "new mount API works");
^
"device not mounted" ?
Also LKML coding style prefers curly braces over both branches if they
are required over one of them.
Other than this the patchset looks fine.
--
Cyril Hrubis
chrubis@suse.cz
next prev parent reply other threads:[~2020-02-17 13:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 8:46 [LTP] [PATCH v7 0/4] Add test for new mount API v5.2 Petr Vorel
2020-02-17 8:46 ` [LTP] [PATCH v7 1/4] tst_umount: Fail immediately when errno != EBUSY Petr Vorel
2020-02-17 8:46 ` [LTP] [PATCH v7 2/4] safe_macros: Use tst_umount() in safe_umount() Petr Vorel
2020-02-17 8:46 ` [LTP] [PATCH v7 3/4] lapi/fsmount: Add definitions for fsmount related syscalls Petr Vorel
2020-02-17 13:49 ` Cyril Hrubis
2020-02-17 8:46 ` [LTP] [PATCH v7 4/4] syscalls/fsmount01: Add test for fsmount series API Petr Vorel
2020-02-17 9:16 ` Li Wang
2020-02-17 9:38 ` Petr Vorel
2020-02-17 13:52 ` Cyril Hrubis [this message]
2020-02-17 14:04 ` Petr Vorel
2020-02-17 14:13 ` Petr Vorel
2020-02-17 15:02 ` Petr Vorel
2020-02-17 9:14 ` [LTP] [PATCH v7 0/4] Add test for new mount API v5.2 Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200217135205.GA25504@rei \
--to=chrubis@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.