From: Anshuman Gupta <anshuman.gupta@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: jani.nikula@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 1/6] drm/i915: Iterate over pipe and skip the disabled one
Date: Tue, 18 Feb 2020 23:23:43 +0530 [thread overview]
Message-ID: <20200218175343.GB7545@intel.com> (raw)
In-Reply-To: <20200207144753.GH13686@intel.com>
On 2020-02-07 at 16:47:53 +0200, Ville Syrjälä wrote:
> On Fri, Feb 07, 2020 at 07:50:37PM +0530, Anshuman Gupta wrote:
> > It should not be assumed that a disabled display pipe will be
> > always last the pipe.
> > for_each_pipe() should iterate over I915_MAX_PIPES and check
> > for the disabled pipe and skip that pipe so that it should not
> > initialize the intel crtc for any disabled pipes.
> >
> > Below compilation error require to be handle due to change in
> > for_each_pipe() macro.
> > "suggest explicit braces to avoid ambiguous ‘else’ [-Werror=dangling-else]"
> >
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.h | 5 +++--
> > drivers/gpu/drm/i915/i915_irq.c | 6 ++++--
> > 2 files changed, 7 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index 75438a136d58..7a531e485b53 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -313,10 +313,11 @@ enum phy_fia {
> > };
> >
> > #define for_each_pipe(__dev_priv, __p) \
> > - for ((__p) = 0; (__p) < INTEL_NUM_PIPES(__dev_priv); (__p)++)
> > + for ((__p) = 0; (__p) < I915_MAX_PIPES; (__p)++) \
> > + for_each_if((INTEL_INFO(__dev_priv)->pipe_mask) & BIT(__p))
>
> Don't need the parens around the (->pipe_mask)
Thanks for review i will address this.
>
> >
> > #define for_each_pipe_masked(__dev_priv, __p, __mask) \
> > - for ((__p) = 0; (__p) < INTEL_NUM_PIPES(__dev_priv); (__p)++) \
> > + for_each_pipe(__dev_priv, __p) \
> > for_each_if((__mask) & BIT(__p))
>
> Shouldn't this one still consult the pipe_mask? There's no reason to
> assume that the caller bothered to filter the mask it passed in.
AFAIU current caller is interested to init the pipe {IIR,IMR,IER}
for the passed mask. Please correct me if i am wrong
here.
Thanks,
Anshuman Gupta.
>
> >
> > #define for_each_cpu_transcoder_masked(__dev_priv, __t, __mask) \
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 3d0cd0960bd2..a26f2bf1b6ea 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -1739,11 +1739,12 @@ static void ibx_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
> > if (pch_iir & SDE_POISON)
> > drm_err(&dev_priv->drm, "PCH poison interrupt\n");
> >
> > - if (pch_iir & SDE_FDI_MASK)
> > + if (pch_iir & SDE_FDI_MASK) {
> > for_each_pipe(dev_priv, pipe)
> > drm_dbg(&dev_priv->drm, " pipe %c FDI IIR: 0x%08x\n",
> > pipe_name(pipe),
> > I915_READ(FDI_RX_IIR(pipe)));
> > + }
> >
> > if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
> > drm_dbg(&dev_priv->drm, "PCH transcoder CRC done interrupt\n");
> > @@ -1823,11 +1824,12 @@ static void cpt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir)
> > if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
> > drm_dbg(&dev_priv->drm, "Audio CP change interrupt\n");
> >
> > - if (pch_iir & SDE_FDI_MASK_CPT)
> > + if (pch_iir & SDE_FDI_MASK_CPT) {
> > for_each_pipe(dev_priv, pipe)
> > drm_dbg(&dev_priv->drm, " pipe %c FDI IIR: 0x%08x\n",
> > pipe_name(pipe),
> > I915_READ(FDI_RX_IIR(pipe)));
> > + }
> >
> > if (pch_iir & SDE_ERROR_CPT)
> > cpt_serr_int_handler(dev_priv);
> > --
> > 2.24.0
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-02-18 18:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200207142042.19689-1-anshuman.gupta@intel.com>
[not found] ` <20200207161531.GL13686@intel.com>
2020-02-11 16:09 ` [Intel-gfx] [PATCH v2 0/6] 3 display pipes combination system support Anshuman Gupta
2020-02-11 16:26 ` Ville Syrjälä
2020-02-11 17:04 ` Anshuman Gupta
[not found] ` <20200207142042.19689-2-anshuman.gupta@intel.com>
[not found] ` <20200207144753.GH13686@intel.com>
2020-02-18 17:53 ` Anshuman Gupta [this message]
2020-02-19 13:15 ` [Intel-gfx] [PATCH v2 1/6] drm/i915: Iterate over pipe and skip the disabled one Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200218175343.GB7545@intel.com \
--to=anshuman.gupta@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.