From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 2/3] ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16
Date: Wed, 19 Feb 2020 09:56:27 -0300 [thread overview]
Message-ID: <20200219125628.25037-2-festevam@gmail.com> (raw)
In-Reply-To: <20200219125628.25037-1-festevam@gmail.com>
Sync the imx6sx-sdb dts files with kernel 5.4.16.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 --
arch/arm/dts/imx6sx-sdb.dts | 35 +++-
arch/arm/dts/imx6sx-sdb.dtsi | 284 +++++++++++++++++-----------
3 files changed, 200 insertions(+), 135 deletions(-)
delete mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi
diff --git a/arch/arm/dts/imx6sx-sdb-u-boot.dtsi b/arch/arm/dts/imx6sx-sdb-u-boot.dtsi
deleted file mode 100644
index 8f9236da0f..0000000000
--- a/arch/arm/dts/imx6sx-sdb-u-boot.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2018 NXP
- */
-
-&qspi2 {
- num-cs = <2>;
-
- flash0: n25q256a at 0 {
- compatible = "jedec,spi-nor";
- };
-
- flash1: n25q256a at 1 {
- compatible = "jedec,spi-nor";
- };
-};
diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts
index 6dd9bebfe0..5a63ca6157 100644
--- a/arch/arm/dts/imx6sx-sdb.dts
+++ b/arch/arm/dts/imx6sx-sdb.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
#include "imx6sx-sdb.dtsi"
@@ -117,15 +113,19 @@
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
reg = <0>;
};
- flash1: n25q256a at 1 {
+ flash1: n25q256a at 2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
- reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <2>;
};
};
@@ -136,3 +136,20 @@
®_soc {
vin-supply = <&sw1a_reg>;
};
+
+®_vdd1p1 {
+ vin-supply = <&vgen6_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&vgen6_reg>;
+};
+
+®_can_stby {
+ /* Transceiver EN/STBY is active low on RevB board */
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6sx-sdb.dtsi b/arch/arm/dts/imx6sx-sdb.dtsi
index da815527a7..f6972deb5e 100644
--- a/arch/arm/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/dts/imx6sx-sdb.dtsi
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -20,11 +16,12 @@
stdout-path = &uart1;
};
- memory {
+ memory at 80000000 {
+ device_type = "memory";
reg = <0x80000000 0x40000000>;
};
- backlight {
+ backlight_display: backlight-display {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -40,95 +37,118 @@
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ vcc_sd3: regulator-vcc-sd3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- vcc_sd3: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_otg1_vbus: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb_otg2_vbus: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg2>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_psu_5v: regulator at 3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "PSU-5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_lcd_3v3: regulator at 4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-3v3";
- gpio = <&gpio3 27 0>;
- enable-active-high;
- };
-
- reg_peri_3v3: regulator at 5 {
- compatible = "regulator-fixed";
- reg = <5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_peri_3v3>;
- regulator-name = "peri_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- reg_enet_3v3: regulator at 6 {
- compatible = "regulator-fixed";
- reg = <6>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_3v3>;
- regulator-name = "enet_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
- };
+ reg_psu_5v: regulator-psu-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "PSU-5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio3 27 0>;
+ enable-active-high;
+ };
+
+ reg_peri_3v3: regulator-peri-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_enet_3v3: regulator-enet-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3v3>;
+ regulator-name = "enet_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_pcie_gpio: regulator-pcie-gpio {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_5v: regulator-lcd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
sound {
@@ -146,6 +166,19 @@
mux-int-port = <2>;
mux-ext-port = <6>;
};
+
+ panel {
+ compatible = "sii,43wvf1g";
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&audmux {
@@ -158,8 +191,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <®_enet_3v3>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -184,6 +218,20 @@
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -212,34 +260,22 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_pcie_gpio>;
+ status = "okay";
+};
+
&lcdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
status = "okay";
- display0: display0 {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -365,6 +401,8 @@
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ /* phy reset */
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0
>;
};
@@ -391,6 +429,20 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
+ >;
+ };
+
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
@@ -453,6 +505,18 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+ >;
+ };
+
+ pinctrl_pcie_reg: pciereggrp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0
+ >;
+ };
+
pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
--
2.17.1
next prev parent reply other threads:[~2020-02-19 12:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 12:56 [PATCH 1/3] ARM: dts: imx6sx: Sync with kernel 5.4.16 Fabio Estevam
2020-02-19 12:56 ` Fabio Estevam [this message]
2020-03-10 15:31 ` [PATCH 2/3] ARM: dts: imx6sx-sdb: " sbabic at denx.de
2020-02-19 12:56 ` [PATCH 3/3] mx6sxsabresd: Enable DM_PCI Fabio Estevam
2020-03-10 15:31 ` sbabic at denx.de
2020-03-10 15:32 ` [PATCH 1/3] ARM: dts: imx6sx: Sync with kernel 5.4.16 sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219125628.25037-2-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.