All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
	lersek@redhat.com, leif@nuviainc.com, pjones@redhat.com,
	mjg59@google.com, agraf@csgraf.de, ilias.apalodimas@linaro.org,
	xypron.glpk@gmx.de, daniel.kiper@oracle.com,
	nivedita@alum.mit.edu, James.Bottomley@hansenpartnership.com
Subject: [RFC PATCH 1/3] efi/x86: Use symbolic constants in PE header instead of bare numbers
Date: Thu, 20 Feb 2020 12:06:47 +0100	[thread overview]
Message-ID: <20200220110649.1303-2-ardb@kernel.org> (raw)
In-Reply-To: <20200220110649.1303-1-ardb@kernel.org>

Replace bare numbers in the PE/COFF header structure with symbolic
constants so they become self documenting.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/boot/header.S | 60 ++++++++++----------
 1 file changed, 31 insertions(+), 29 deletions(-)

diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 44aeb63ca6ae..9110b58aa2ec 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -15,7 +15,7 @@
  * hex while segment addresses are written as segment:offset.
  *
  */
-
+#include <linux/pe.h>
 #include <asm/segment.h>
 #include <asm/boot.h>
 #include <asm/page_types.h>
@@ -43,8 +43,7 @@ SYSSEG		= 0x1000		/* historical load address >> 4 */
 bootsect_start:
 #ifdef CONFIG_EFI_STUB
 	# "MZ", MS-DOS header
-	.byte 0x4d
-	.byte 0x5a
+	.word	MZ_MAGIC
 #endif
 
 	# Normalize the start address
@@ -97,39 +96,30 @@ bugger_off_msg:
 
 #ifdef CONFIG_EFI_STUB
 pe_header:
-	.ascii	"PE"
-	.word 	0
+	.long	PE_MAGIC
 
 coff_header:
 #ifdef CONFIG_X86_32
-	.word	0x14c				# i386
+	.set	image_file_add_flags, IMAGE_FILE_32BIT_MACHINE
+	.set	pe_opt_magic, PE_OPT_MAGIC_PE32
+	.word	IMAGE_FILE_MACHINE_I386
 #else
-	.word	0x8664				# x86-64
+	.set	image_file_add_flags, 0
+	.set	pe_opt_magic, PE_OPT_MAGIC_PE32PLUS
+	.word	IMAGE_FILE_MACHINE_AMD64
 #endif
 	.word	section_count			# nr_sections
 	.long	0 				# TimeDateStamp
 	.long	0				# PointerToSymbolTable
 	.long	1				# NumberOfSymbols
 	.word	section_table - optional_header	# SizeOfOptionalHeader
-#ifdef CONFIG_X86_32
-	.word	0x306				# Characteristics.
-						# IMAGE_FILE_32BIT_MACHINE |
-						# IMAGE_FILE_DEBUG_STRIPPED |
-						# IMAGE_FILE_EXECUTABLE_IMAGE |
-						# IMAGE_FILE_LINE_NUMS_STRIPPED
-#else
-	.word	0x206				# Characteristics
-						# IMAGE_FILE_DEBUG_STRIPPED |
-						# IMAGE_FILE_EXECUTABLE_IMAGE |
-						# IMAGE_FILE_LINE_NUMS_STRIPPED
-#endif
+	.word	IMAGE_FILE_EXECUTABLE_IMAGE	| \
+		image_file_add_flags		| \
+		IMAGE_FILE_DEBUG_STRIPPED	| \
+		IMAGE_FILE_LINE_NUMS_STRIPPED	# Characteristics
 
 optional_header:
-#ifdef CONFIG_X86_32
-	.word	0x10b				# PE32 format
-#else
-	.word	0x20b 				# PE32+ format
-#endif
+	.word	pe_opt_magic
 	.byte	0x02				# MajorLinkerVersion
 	.byte	0x14				# MinorLinkerVersion
 
@@ -170,7 +160,7 @@ extra_header_fields:
 
 	.long	0x200				# SizeOfHeaders
 	.long	0				# CheckSum
-	.word	0xa				# Subsystem (EFI application)
+	.word	IMAGE_SUBSYSTEM_EFI_APPLICATION	# Subsystem (EFI application)
 	.word	0				# DllCharacteristics
 #ifdef CONFIG_X86_32
 	.long	0				# SizeOfStackReserve
@@ -210,7 +200,10 @@ section_table:
 	.long	0				# PointerToLineNumbers
 	.word	0				# NumberOfRelocations
 	.word	0				# NumberOfLineNumbers
-	.long	0x60500020			# Characteristics (section flags)
+	.long	IMAGE_SCN_CNT_CODE		| \
+		IMAGE_SCN_MEM_READ		| \
+		IMAGE_SCN_MEM_EXECUTE		| \
+		IMAGE_SCN_ALIGN_16BYTES		# Characteristics
 
 	#
 	# The EFI application loader requires a relocation section
@@ -228,7 +221,10 @@ section_table:
 	.long	0				# PointerToLineNumbers
 	.word	0				# NumberOfRelocations
 	.word	0				# NumberOfLineNumbers
-	.long	0x42100040			# Characteristics (section flags)
+	.long	IMAGE_SCN_CNT_INITIALIZED_DATA	| \
+		IMAGE_SCN_MEM_READ		| \
+		IMAGE_SCN_MEM_DISCARDABLE	| \
+		IMAGE_SCN_ALIGN_1BYTES		# Characteristics
 
 #ifdef CONFIG_EFI_MIXED
 	#
@@ -244,7 +240,10 @@ section_table:
 	.long	0				# PointerToLineNumbers
 	.word	0				# NumberOfRelocations
 	.word	0				# NumberOfLineNumbers
-	.long	0x42100040			# Characteristics (section flags)
+	.long	IMAGE_SCN_CNT_INITIALIZED_DATA	| \
+		IMAGE_SCN_MEM_READ		| \
+		IMAGE_SCN_MEM_DISCARDABLE	| \
+		IMAGE_SCN_ALIGN_1BYTES		# Characteristics
 #endif
 
 	#
@@ -263,7 +262,10 @@ section_table:
 	.long	0				# PointerToLineNumbers
 	.word	0				# NumberOfRelocations
 	.word	0				# NumberOfLineNumbers
-	.long	0x60500020			# Characteristics (section flags)
+	.long	IMAGE_SCN_CNT_CODE		| \
+		IMAGE_SCN_MEM_READ		| \
+		IMAGE_SCN_MEM_EXECUTE		| \
+		IMAGE_SCN_ALIGN_16BYTES		# Characteristics
 
 	.set	section_count, (. - section_table) / 40
 #endif /* CONFIG_EFI_STUB */
-- 
2.17.1


  reply	other threads:[~2020-02-20 11:07 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-20 11:06 [RFC PATCH 0/3] efi: put an API version number in the PE/COFF header Ard Biesheuvel
2020-02-20 11:06 ` Ard Biesheuvel [this message]
2020-02-20 17:28   ` [RFC PATCH 1/3] efi/x86: Use symbolic constants in PE header instead of bare numbers Arvind Sankar
2020-02-20 17:32     ` Ard Biesheuvel
2020-02-20 18:04       ` Arvind Sankar
2020-02-20 18:11         ` Arvind Sankar
2020-02-20 18:14         ` Ard Biesheuvel
2020-02-20 19:33           ` Arvind Sankar
2020-02-20 19:51       ` Arvind Sankar
2020-02-20 21:22         ` Ard Biesheuvel
2020-02-20 22:04           ` Arvind Sankar
2020-02-20 11:06 ` [RFC PATCH 2/3] efi/libstub: Introduce symbolic constants for the stub major/minor version Ard Biesheuvel
2020-02-20 11:06 ` [RFC PATCH 3/3] efi: Bump the Linux EFI stub major version number to #1 Ard Biesheuvel
2020-02-20 13:53 ` [RFC PATCH 0/3] efi: put an API version number in the PE/COFF header Daniel Kiper
2020-02-20 14:55 ` Heinrich Schuchardt
2020-02-20 19:29   ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200220110649.1303-2-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=agraf@csgraf.de \
    --cc=daniel.kiper@oracle.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=leif@nuviainc.com \
    --cc=lersek@redhat.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=mjg59@google.com \
    --cc=nivedita@alum.mit.edu \
    --cc=pjones@redhat.com \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.