All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers
Date: Wed, 26 Feb 2020 03:35:27 +1000	[thread overview]
Message-ID: <20200225173541.1549955-19-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>

Remove more magic numbers and replace with nicely named bools.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 68 +++++++++++++---------------
 1 file changed, 32 insertions(+), 36 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index ae0e68899f0e..b01ff51892dc 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -105,11 +105,6 @@ name:
 	ori	reg,reg,(ABS_ADDR(label))@l;				\
 	addis	reg,reg,(ABS_ADDR(label))@h
 
-/* Exception register prefixes */
-#define EXC_HV_OR_STD	2 /* depends on HVMODE */
-#define EXC_HV		1
-#define EXC_STD		0
-
 /*
  * Branch to label using its 0xC000 address. This results in instruction
  * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -128,6 +123,7 @@ name:
  */
 #define IVEC		.L_IVEC_\name\()
 #define IHSRR		.L_IHSRR_\name\()
+#define IHSRR_IF_HVMODE	.L_IHSRR_IF_HVMODE_\name\()
 #define IAREA		.L_IAREA_\name\()
 #define IVIRT		.L_IVIRT_\name\()
 #define IISIDE		.L_IISIDE_\name\()
@@ -159,7 +155,10 @@ do_define_int n
 		.error "IVEC not defined"
 	.endif
 	.ifndef IHSRR
-		IHSRR=EXC_STD
+		IHSRR=0
+	.endif
+	.ifndef IHSRR_IF_HVMODE
+		IHSRR_IF_HVMODE=0
 	.endif
 	.ifndef IAREA
 		IAREA=PACA_EXGEN
@@ -257,7 +256,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r9,IAREA+EX_R9(r13)
 	ld	r10,IAREA+EX_R10(r13)
 	/* HSRR variants have the 0x2 bit added to their trap number */
-	.if IHSRR == EXC_HV_OR_STD
+	.if IHSRR_IF_HVMODE
 	BEGIN_FTR_SECTION
 	ori	r12,r12,(IVEC + 0x2)
 	FTR_SECTION_ELSE
@@ -278,7 +277,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	ld	r10,IAREA+EX_R10(r13)
 	ld	r11,IAREA+EX_R11(r13)
 	ld	r12,IAREA+EX_R12(r13)
-	.if IHSRR == EXC_HV_OR_STD
+	.if IHSRR_IF_HVMODE
 	BEGIN_FTR_SECTION
 	b	kvmppc_skip_Hinterrupt
 	FTR_SECTION_ELSE
@@ -403,7 +402,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	stw	r10,IAREA+EX_DSISR(r13)
 	.endif
 
-	.if IHSRR == EXC_HV_OR_STD
+	.if IHSRR_IF_HVMODE
 	BEGIN_FTR_SECTION
 	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
 	mfspr	r12,SPRN_HSRR1		/* and HSRR1 */
@@ -485,7 +484,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
 		.abort "Bad maskable vector"
 		.endif
 
-		.if IHSRR == EXC_HV_OR_STD
+		.if IHSRR_IF_HVMODE
 		BEGIN_FTR_SECTION
 		bne	masked_Hinterrupt
 		FTR_SECTION_ELSE
@@ -618,12 +617,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
  * Restore all registers including H/SRR0/1 saved in a stack frame of a
  * standard exception.
  */
-.macro EXCEPTION_RESTORE_REGS hsrr
+.macro EXCEPTION_RESTORE_REGS hsrr=0
 	/* Move original SRR0 and SRR1 into the respective regs */
 	ld	r9,_MSR(r1)
-	.if \hsrr == EXC_HV_OR_STD
-	.error "EXC_HV_OR_STD Not implemented for EXCEPTION_RESTORE_REGS"
-	.endif
 	.if \hsrr
 	mtspr	SPRN_HSRR1,r9
 	.else
@@ -898,7 +894,7 @@ EXC_COMMON_BEGIN(system_reset_common)
 	ld	r10,SOFTE(r1)
 	stb	r10,PACAIRQSOFTMASK(r13)
 
-	EXCEPTION_RESTORE_REGS EXC_STD
+	EXCEPTION_RESTORE_REGS
 	RFI_TO_USER_OR_KERNEL
 
 	GEN_KVM system_reset
@@ -952,7 +948,7 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi)
 	lhz	r12,PACA_IN_MCE(r13);			\
 	subi	r12,r12,1;				\
 	sth	r12,PACA_IN_MCE(r13);			\
-	EXCEPTION_RESTORE_REGS EXC_STD
+	EXCEPTION_RESTORE_REGS
 
 EXC_COMMON_BEGIN(machine_check_early_common)
 	/*
@@ -1321,7 +1317,7 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
 
 INT_DEFINE_BEGIN(hardware_interrupt)
 	IVEC=0x500
-	IHSRR=EXC_HV_OR_STD
+	IHSRR_IF_HVMODE=1
 	IMASK=IRQS_DISABLED
 	IKVM_REAL=1
 	IKVM_VIRT=1
@@ -1490,7 +1486,7 @@ EXC_COMMON_BEGIN(decrementer_common)
 
 INT_DEFINE_BEGIN(hdecrementer)
 	IVEC=0x980
-	IHSRR=EXC_HV
+	IHSRR=1
 	ISTACK=0
 	IRECONCILE=0
 	IKVM_REAL=1
@@ -1719,7 +1715,7 @@ EXC_COMMON_BEGIN(single_step_common)
 
 INT_DEFINE_BEGIN(h_data_storage)
 	IVEC=0xe00
-	IHSRR=EXC_HV
+	IHSRR=1
 	IDAR=1
 	IDSISR=1
 	IKVM_SKIP=1
@@ -1751,7 +1747,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX)
 
 INT_DEFINE_BEGIN(h_instr_storage)
 	IVEC=0xe20
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_REAL=1
 	IKVM_VIRT=1
 INT_DEFINE_END(h_instr_storage)
@@ -1774,7 +1770,7 @@ EXC_COMMON_BEGIN(h_instr_storage_common)
 
 INT_DEFINE_BEGIN(emulation_assist)
 	IVEC=0xe40
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_REAL=1
 	IKVM_VIRT=1
 INT_DEFINE_END(emulation_assist)
@@ -1802,7 +1798,7 @@ EXC_COMMON_BEGIN(emulation_assist_common)
  */
 INT_DEFINE_BEGIN(hmi_exception_early)
 	IVEC=0xe60
-	IHSRR=EXC_HV
+	IHSRR=1
 	IREALMODE_COMMON=1
 	ISTACK=0
 	IRECONCILE=0
@@ -1812,7 +1808,7 @@ INT_DEFINE_END(hmi_exception_early)
 
 INT_DEFINE_BEGIN(hmi_exception)
 	IVEC=0xe60
-	IHSRR=EXC_HV
+	IHSRR=1
 	IMASK=IRQS_DISABLED
 	IKVM_REAL=1
 INT_DEFINE_END(hmi_exception)
@@ -1834,7 +1830,7 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
 	cmpdi	cr0,r3,0
 	bne	1f
 
-	EXCEPTION_RESTORE_REGS EXC_HV
+	EXCEPTION_RESTORE_REGS hsrr=1
 	HRFI_TO_USER_OR_KERNEL
 
 1:
@@ -1842,7 +1838,7 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
 	 * Go to virtual mode and pull the HMI event information from
 	 * firmware.
 	 */
-	EXCEPTION_RESTORE_REGS EXC_HV
+	EXCEPTION_RESTORE_REGS hsrr=1
 	GEN_INT_ENTRY hmi_exception, virt=0
 
 	GEN_KVM hmi_exception_early
@@ -1861,7 +1857,7 @@ EXC_COMMON_BEGIN(hmi_exception_common)
 
 INT_DEFINE_BEGIN(h_doorbell)
 	IVEC=0xe80
-	IHSRR=EXC_HV
+	IHSRR=1
 	IMASK=IRQS_DISABLED
 	IKVM_REAL=1
 	IKVM_VIRT=1
@@ -1890,7 +1886,7 @@ EXC_COMMON_BEGIN(h_doorbell_common)
 
 INT_DEFINE_BEGIN(h_virt_irq)
 	IVEC=0xea0
-	IHSRR=EXC_HV
+	IHSRR=1
 	IMASK=IRQS_DISABLED
 	IKVM_REAL=1
 	IKVM_VIRT=1
@@ -2060,7 +2056,7 @@ EXC_COMMON_BEGIN(facility_unavailable_common)
 
 INT_DEFINE_BEGIN(h_facility_unavailable)
 	IVEC=0xf80
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_REAL=1
 	IKVM_VIRT=1
 INT_DEFINE_END(h_facility_unavailable)
@@ -2096,7 +2092,7 @@ EXC_VIRT_NONE(0x5100, 0x100)
 #ifdef CONFIG_CBE_RAS
 INT_DEFINE_BEGIN(cbe_system_error)
 	IVEC=0x1200
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_SKIP=1
 	IKVM_REAL=1
 INT_DEFINE_END(cbe_system_error)
@@ -2147,8 +2143,8 @@ EXC_VIRT_NONE(0x5400, 0x100)
 
 INT_DEFINE_BEGIN(denorm_exception)
 	IVEC=0x1500
-	IHSRR=EXC_HV
-	IBRANCH_TO_COMMON=0
+	IHSRR=1
+	IBRANCH_COMMON=0
 	IKVM_REAL=1
 INT_DEFINE_END(denorm_exception)
 
@@ -2256,7 +2252,7 @@ EXC_COMMON_BEGIN(denorm_exception_common)
 #ifdef CONFIG_CBE_RAS
 INT_DEFINE_BEGIN(cbe_maintenance)
 	IVEC=0x1600
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_SKIP=1
 	IKVM_REAL=1
 INT_DEFINE_END(cbe_maintenance)
@@ -2308,7 +2304,7 @@ EXC_COMMON_BEGIN(altivec_assist_common)
 #ifdef CONFIG_CBE_RAS
 INT_DEFINE_BEGIN(cbe_thermal)
 	IVEC=0x1800
-	IHSRR=EXC_HV
+	IHSRR=1
 	IKVM_SKIP=1
 	IKVM_REAL=1
 INT_DEFINE_END(cbe_thermal)
@@ -2371,7 +2367,7 @@ EXC_COMMON_BEGIN(soft_nmi_common)
  * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return.
  * This is called with r10 containing the value to OR to the paca field.
  */
-.macro MASKED_INTERRUPT hsrr
+.macro MASKED_INTERRUPT hsrr=0
 	.if \hsrr
 masked_Hinterrupt:
 	.else
@@ -2518,8 +2514,8 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback)
 	hrfid
 
 USE_TEXT_SECTION()
-	MASKED_INTERRUPT EXC_STD
-	MASKED_INTERRUPT EXC_HV
+	MASKED_INTERRUPT
+	MASKED_INTERRUPT hsrr=1
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 kvmppc_skip_interrupt:
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 18:34 UTC|newest]

Thread overview: 161+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53   ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19  9:18   ` Christophe Leroy
2020-03-20  3:39     ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20   ` Segher Boessenkool
2020-02-26  3:39     ` Nicholas Piggin
2020-03-07  0:54     ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27  8:54   ` Christophe Leroy
2021-01-28  0:09     ` Nicholas Piggin
2021-02-03 16:25   ` Christophe Leroy
2021-02-04  3:27     ` Nicholas Piggin
2021-02-04  8:03       ` Christophe Leroy
2021-02-04  8:53         ` Nicholas Piggin
2021-02-05  0:22           ` Michael Ellerman
2021-02-05  2:16             ` Nicholas Piggin
2021-02-05  6:04               ` Christophe Leroy
2021-02-06  2:28                 ` Nicholas Piggin
2021-02-27 10:07   ` Christophe Leroy
2021-03-01  0:47     ` Nicholas Piggin
2021-03-15 13:41   ` Christophe Leroy
2021-03-16  7:36     ` Nicholas Piggin
2021-03-19 11:44       ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20   ` kbuild test robot
2020-03-01 12:20     ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19   ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-24  8:48     ` Nicholas Piggin
2020-03-24  8:48       ` Nicholas Piggin
2020-03-24 19:38       ` Michal Suchánek
2020-03-24 19:38         ` Michal Suchánek
2020-04-03  7:13         ` Nicholas Piggin
2020-04-03  7:13           ` Nicholas Piggin
2020-04-03 10:52           ` Michal Suchánek
2020-04-03 10:52             ` Michal Suchánek
2020-04-03 11:26             ` Nicholas Piggin
2020-04-03 11:26               ` Nicholas Piggin
2020-04-03 11:51               ` Michal Suchánek
2020-04-03 11:51                 ` Michal Suchánek
2020-04-06 20:52           ` Michal Suchánek
2020-04-06 20:52             ` Michal Suchánek
2020-04-06 21:00           ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-06 21:00             ` Michal Suchanek
2020-04-07  5:21             ` Christophe Leroy
2020-04-07  5:21               ` Christophe Leroy
2020-04-09 11:22               ` Michal Suchánek
2020-04-09 11:22                 ` Michal Suchánek
2020-03-19 12:19   ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-24  8:54     ` Nicholas Piggin
2020-03-24  8:54       ` Nicholas Piggin
2020-03-24 19:30       ` Michal Suchánek
2020-03-24 19:30         ` Michal Suchánek
2020-04-03  7:16         ` Nicholas Piggin
2020-04-03  7:16           ` Nicholas Piggin
2020-03-19 12:19   ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 12:19     ` Michal Suchanek
2020-03-19 13:37     ` Andy Shevchenko
2020-03-19 13:37       ` Andy Shevchenko
2020-03-19 14:00       ` Michal Suchánek
2020-03-19 14:00         ` Michal Suchánek
2020-03-19 14:26         ` Andy Shevchenko
2020-03-19 14:26           ` Andy Shevchenko
2020-03-19 17:03     ` Joe Perches
2020-03-19 17:03       ` Joe Perches
2020-03-19 12:36   ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 12:36     ` Christophe Leroy
2020-03-19 14:01     ` Michal Suchánek
2020-03-19 14:01       ` Michal Suchánek
2020-04-03  7:25   ` Nicholas Piggin
2020-04-03  7:25     ` Nicholas Piggin
2020-04-03  7:26     ` Christophe Leroy
2020-04-03  7:26       ` Christophe Leroy
2020-04-03  9:43       ` Nicholas Piggin
2020-04-03  9:43         ` Nicholas Piggin
2020-04-05  0:40         ` Michael Ellerman
2020-04-05  0:40           ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20   ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-04-06 13:05     ` Michael Ellerman
2020-03-20 10:20   ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-04-07  5:50     ` Christophe Leroy
2020-04-07  5:50       ` Christophe Leroy
2020-04-07  9:57       ` Michal Suchánek
2020-04-07  9:57         ` Michal Suchánek
2020-03-20 10:20   ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:20     ` Michal Suchanek
2020-03-20 10:33     ` Andy Shevchenko
2020-03-20 10:33       ` Andy Shevchenko
2020-03-20 11:23       ` Michal Suchánek
2020-03-20 11:23         ` Michal Suchánek
2020-03-20 12:42         ` Andy Shevchenko
2020-03-20 12:42           ` Andy Shevchenko
2020-03-20 14:42           ` Joe Perches
2020-03-20 14:42             ` Joe Perches
2020-03-20 16:28             ` Michal Suchánek
2020-03-20 16:28               ` Michal Suchánek
2020-03-20 16:31             ` Andy Shevchenko
2020-03-20 16:31               ` Andy Shevchenko
2020-03-20 16:42               ` Michal Suchánek
2020-03-20 16:42                 ` Michal Suchánek
2020-03-20 16:47                 ` Andy Shevchenko
2020-03-20 16:47                   ` Andy Shevchenko
2020-03-20 21:36               ` Joe Perches
2020-03-20 21:36                 ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225173541.1549955-19-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msuchanek@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.