From: Jonathan Richardson <jonathan.richardson@broadcom.com>
To: openembedded-devel@lists.openembedded.org
Subject: [meta-oe][PATCH v3 1/1] open-lldp: Add initial version 1.0.1
Date: Wed, 26 Feb 2020 16:32:40 -0800 [thread overview]
Message-ID: <20200227003240.76088-1-jonathan.richardson@broadcom.com> (raw)
Open-LLDP provides a Link Layer Discovery Protocol agent that supports
DCB (Data Center Bridging). The tc utility from iproute is needed to
manipulate traffic control settings in the kernel.
Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
---
.../0001-Fix-musl-libc-build-issue.patch | 26 +++++++++
...-include-path-to-generated-version.h.patch | 29 ++++++++++
...tion-to-disable-installation-of-syst.patch | 57 +++++++++++++++++++
.../openlldp/openlldp_1.0.1.bb | 33 +++++++++++
4 files changed, 145 insertions(+)
create mode 100644 meta-networking/recipes-protocols/openlldp/files/0001-Fix-musl-libc-build-issue.patch
create mode 100644 meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-include-path-to-generated-version.h.patch
create mode 100644 meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-option-to-disable-installation-of-syst.patch
create mode 100644 meta-networking/recipes-protocols/openlldp/openlldp_1.0.1.bb
diff --git a/meta-networking/recipes-protocols/openlldp/files/0001-Fix-musl-libc-build-issue.patch b/meta-networking/recipes-protocols/openlldp/files/0001-Fix-musl-libc-build-issue.patch
new file mode 100644
index 000000000..40b082e77
--- /dev/null
+++ b/meta-networking/recipes-protocols/openlldp/files/0001-Fix-musl-libc-build-issue.patch
@@ -0,0 +1,26 @@
+From a64e52f9b58519aa2b8a1073fa6c04da04933428 Mon Sep 17 00:00:00 2001
+From: Jonathan Richardson <jonathan.richardson@broadcom.com>
+Date: Wed, 26 Feb 2020 12:16:38 -0800
+Subject: [PATCH] Fix musl libc build issue
+
+clif.h should include sys/types.h for the definition of pid_t. It fails
+to compile when using musl libc.
+
+Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
+
+---
+ include/clif.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/include/clif.h b/include/clif.h
+index 648eedf..92f4fd8 100644
+--- a/include/clif.h
++++ b/include/clif.h
+@@ -32,6 +32,7 @@
+ #ifndef CLIF_H
+ #define CLIF_H
+
++#include <sys/types.h>
+ #include <sys/un.h>
+ #include "clif_sock.h"
+
diff --git a/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-include-path-to-generated-version.h.patch b/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-include-path-to-generated-version.h.patch
new file mode 100644
index 000000000..b58fc104d
--- /dev/null
+++ b/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-include-path-to-generated-version.h.patch
@@ -0,0 +1,29 @@
+From eb14aa66dc0384071af401cced8c02993b55502e Mon Sep 17 00:00:00 2001
+From: Jonathan Richardson <jonathan.richardson@broadcom.com>
+Date: Wed, 26 Feb 2020 15:54:51 -0800
+Subject: [PATCH] autotools: Add include path to generated version.h
+
+When the build dir isn't the same as source dir it fails to compile
+because the generated version.h from AC_CONFIG_FILES is always in build
+dir. Include the path to it in AM_CPPFLAGS.
+
+Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
+
+---
+ Makefile.am | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/Makefile.am b/Makefile.am
+index 0fb9bb0..2952019 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -14,6 +14,9 @@ endif
+ AM_CPPFLAGS = -I${srcdir}/include -DSYSCONFDIR="\"${sysconfdir}\"" \
+ -D_FORTIFY_SOURCE=2
+
++# Required for the generated version.h when build dir is not the same as srcdir.
++AM_CPPFLAGS += -I${top_builddir}/include
++
+ ACLOCAL_AMFLAGS = -I m4
+
+ parse_cli.o: CFLAGS+=-U_FORTIFY_SOURCE -Wno-error
diff --git a/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-option-to-disable-installation-of-syst.patch b/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-option-to-disable-installation-of-syst.patch
new file mode 100644
index 000000000..a26a5299a
--- /dev/null
+++ b/meta-networking/recipes-protocols/openlldp/files/0001-autotools-Add-option-to-disable-installation-of-syst.patch
@@ -0,0 +1,57 @@
+From dc3f2250908587710f109c80ddf8a94f0bc40b82 Mon Sep 17 00:00:00 2001
+From: Jonathan Richardson <jonathan.richardson@broadcom.com>
+Date: Fri, 6 Apr 2018 10:49:04 -0700
+Subject: [PATCH] autotools: Add option to disable installation of systemd conf
+ files
+
+Add option to configure.ac to enable or disable install of systemd conf
+files. If --with-systemdsystemunitdir is passed to configure then the
+files will be installed to the provided directory. If the option isn't
+provided then the value is determined from the systemd pkgconfig file,
+if found in PKG_CONFIG_PATH.
+
+This change is required because Makefile.am always installed the files
+to a hard coded path that couldn't be changed.
+
+
+Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
+---
+ Makefile.am | 3 ++-
+ configure.ac | 9 +++++++++
+ 2 files changed, 11 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index 292c0fd..0fb9bb0 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -138,8 +138,9 @@ install-data-hook: installdirs-local
+ pkgconfigdir = ${libdir}/pkgconfig
+ pkgconfig_DATA = lldpad.pc liblldp_clif.pc
+
+-systemdsystemunitdir = $(prefix)/lib/systemd/system
++if HAVE_SYSTEMD
+ dist_systemdsystemunit_DATA = lldpad.service lldpad.socket
++endif
+
+ bashcompletiondir = $(sysconfdir)/bash_completion.d
+ dist_bashcompletion_DATA = contrib/bash_completion/lldpad contrib/bash_completion/lldptool
+diff --git a/configure.ac b/configure.ac
+index 0667446..f75f433 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -95,6 +95,15 @@ AC_TYPE_UINT16_T
+ AC_TYPE_UINT32_T
+ AC_TYPE_UINT8_T
+
++# Support for systemd unit files.
++AC_ARG_WITH([systemdsystemunitdir],
++ AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
++ [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
++if test "x$with_systemdsystemunitdir" != xno; then
++ AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])
++fi
++AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ])
++
+ AC_CONFIG_FILES([Makefile include/version.h lldpad.spec lldpad.pc liblldp_clif.pc])
+ AC_CONFIG_MACRO_DIR([m4])
+ AC_OUTPUT
diff --git a/meta-networking/recipes-protocols/openlldp/openlldp_1.0.1.bb b/meta-networking/recipes-protocols/openlldp/openlldp_1.0.1.bb
new file mode 100644
index 000000000..5fbf0645e
--- /dev/null
+++ b/meta-networking/recipes-protocols/openlldp/openlldp_1.0.1.bb
@@ -0,0 +1,33 @@
+SUMMARY = "Open-LLDP"
+DESCRIPTION = "Link Layer Discovery Protocol for Linux that includes support for DCBX"
+HOMEPAGE = "http://open-lldp.org/start"
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=8c2bc283e65df398ced5f5b747e78162"
+
+S = "${WORKDIR}/git"
+
+inherit pkgconfig autotools
+inherit ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd', '', d)}
+
+DEPENDS = "libnl libconfig readline"
+
+SRCREV = "36d729de7ce5b56cf061d94d610cf0510154820c"
+SRC_URI = "git://github.com/intel/openlldp.git;protocol=https;branch=master \
+ file://0001-Fix-musl-libc-build-issue.patch \
+ file://0001-autotools-Add-include-path-to-generated-version.h.patch \
+ file://0001-autotools-Add-option-to-disable-installation-of-syst.patch \
+ "
+
+# Makefile.am adds -Werror to AM_CFLAGS. There are warnings so disable it.
+TARGET_CFLAGS += "-Wno-error"
+
+# Enable install of systemd conf files.
+EXTRA_OECONF += "${@bb.utils.contains('DISTRO_FEATURES', 'systemd', '--with-systemdsystemunitdir=${systemd_system_unitdir}', '', d)}"
+
+SYSTEMD_SERVICE_${PN} = "lldpad.service lldpad.socket"
+
+# To enable service at boot set to enable in local.conf.
+SYSTEMD_AUTO_ENABLE ?= "disable"
+
+RRECOMMENDS_${PN} = "iproute2-tc"
--
2.17.1
reply other threads:[~2020-02-27 0:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200227003240.76088-1-jonathan.richardson@broadcom.com \
--to=jonathan.richardson@broadcom.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.