From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org, aik@ozlabs.ru,
david@gibson.dropbear.id.au, linux-kernel@vger.kernel.org,
nayna@linux.vnet.ibm.com, gcwilson@linux.ibm.com, jgg@ziepe.ca,
Stefan Berger <stefanb@linux.ibm.com>
Subject: Re: [PATCH v3 2/4] tpm: ibmvtpm: Wait for buffer to be set before proceeding
Date: Thu, 27 Feb 2020 18:00:31 +0200 [thread overview]
Message-ID: <20200227160031.GA5140@linux.intel.com> (raw)
In-Reply-To: <20200227002654.7536-3-stefanb@linux.vnet.ibm.com>
On Wed, Feb 26, 2020 at 07:26:52PM -0500, Stefan Berger wrote:
> From: Stefan Berger <stefanb@linux.ibm.com>
>
> Synchronize with the results from the CRQs before continuing with
> the initialization. This avoids trying to send TPM commands while
> the rtce buffer has not been allocated, yet.
>
> This patch fixes an existing race condition that may occurr if the
> hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
> request sent during initialization and therefore the ibmvtpm->rtce_buf
> has not been allocated at the time the first TPM command is sent.
>
> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
> Fixes: 132f76294744 ("Add new device driver to support IBM vTPM")
Fixes ought to be before sob.
> ---
> drivers/char/tpm/tpm_ibmvtpm.c | 9 +++++++++
> drivers/char/tpm/tpm_ibmvtpm.h | 1 +
> 2 files changed, 10 insertions(+)
>
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
> index 78cc52690177..eee566eddb35 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.c
> +++ b/drivers/char/tpm/tpm_ibmvtpm.c
> @@ -571,6 +571,7 @@ static irqreturn_t ibmvtpm_interrupt(int irq, void *vtpm_instance)
> */
> while ((crq = ibmvtpm_crq_get_next(ibmvtpm)) != NULL) {
> ibmvtpm_crq_process(crq, ibmvtpm);
> + wake_up_interruptible(&ibmvtpm->crq_queue.wq);
> crq->valid = 0;
> smp_wmb();
> }
> @@ -618,6 +619,7 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
> }
>
> crq_q->num_entry = CRQ_RES_BUF_SIZE / sizeof(*crq_q->crq_addr);
> + init_waitqueue_head(&crq_q->wq);
> ibmvtpm->crq_dma_handle = dma_map_single(dev, crq_q->crq_addr,
> CRQ_RES_BUF_SIZE,
> DMA_BIDIRECTIONAL);
> @@ -670,6 +672,13 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
> if (rc)
> goto init_irq_cleanup;
>
> + if (!wait_event_timeout(ibmvtpm->crq_queue.wq,
> + ibmvtpm->rtce_buf != NULL,
> + HZ)) {
> + dev_err(dev, "Initialization failed\n");
> + goto init_irq_cleanup;
> + }
> +
> return tpm_chip_register(chip);
> init_irq_cleanup:
> do {
> diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
> index 7983f1a33267..b92aa7d3e93e 100644
> --- a/drivers/char/tpm/tpm_ibmvtpm.h
> +++ b/drivers/char/tpm/tpm_ibmvtpm.h
> @@ -26,6 +26,7 @@ struct ibmvtpm_crq_queue {
> struct ibmvtpm_crq *crq_addr;
> u32 index;
> u32 num_entry;
> + wait_queue_head_t wq;
> };
>
> struct ibmvtpm_dev {
> --
> 2.23.0
>
/Jarkko
next prev parent reply other threads:[~2020-02-27 16:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-27 0:26 [PATCH v3 0/4] Enable vTPM 2.0 for the IBM vTPM driver Stefan Berger
2020-02-27 0:26 ` [PATCH v3 1/4] tpm: of: Handle IBM,vtpm20 case when getting log parameters Stefan Berger
2020-02-27 0:26 ` [PATCH v3 2/4] tpm: ibmvtpm: Wait for buffer to be set before proceeding Stefan Berger
2020-02-27 16:00 ` Jarkko Sakkinen [this message]
2020-02-27 0:26 ` [PATCH v3 3/4] tpm: Implement tpm2_init_commands to use in non-auto startup case Stefan Berger
2020-02-27 16:02 ` Jarkko Sakkinen
2020-02-27 0:26 ` [PATCH v3 4/4] tpm: ibmvtpm: Add support for TPM 2 Stefan Berger
2020-02-27 16:04 ` Jarkko Sakkinen
-- strict thread matches above, loose matches on Subject: below --
2020-02-25 20:53 [PATCH v3 0/4] Enable vTPM 2.0 for the IBM vTPM driver Stefan Berger
2020-02-25 20:53 ` [PATCH v3 2/4] tpm: ibmvtpm: Wait for buffer to be set before proceeding Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200227160031.GA5140@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=aik@ozlabs.ru \
--cc=david@gibson.dropbear.id.au \
--cc=gcwilson@linux.ibm.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=stefanb@linux.ibm.com \
--cc=stefanb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.