All of lore.kernel.org
 help / color / mirror / Atom feed
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: Syed Nayyar Waris <syednwaris@gmail.com>
Cc: jic23@kernel.org, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/3] counter: 104-quad-8: Add lock guards - differential encoder cable
Date: Fri, 13 Mar 2020 12:51:36 -0400	[thread overview]
Message-ID: <20200313165136.GB5024@icarus> (raw)
In-Reply-To: <20200313120133.GA17830@syed>

[-- Attachment #1: Type: text/plain, Size: 2408 bytes --]

On Fri, Mar 13, 2020 at 05:31:33PM +0530, Syed Nayyar Waris wrote:
> Add lock protection from race conditions in the 104-quad-8 counter
> driver for differential encoder cable status changes. There is no IRQ
> handling so use spin_lock calls for protection.
> 
> Fixes: bbef69e088c3 ("counter: 104-quad-8: Support Differential Encoder Cable Status")
> 
> Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>

> ---
> Changes in v4:
>  - Shift review-comments section so that it is not saved in commit message.
>  - Add spin_unlock calls for deadlock avoidance.
>  - Few changes related to casting.
> 
>  drivers/counter/104-quad-8.c | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
> index 9dab190..c9e227f 100644
> --- a/drivers/counter/104-quad-8.c
> +++ b/drivers/counter/104-quad-8.c
> @@ -1151,18 +1151,26 @@ static ssize_t quad8_signal_cable_fault_read(struct counter_device *counter,
>  					     struct counter_signal *signal,
>  					     void *private, char *buf)
>  {
> -	const struct quad8_iio *const priv = counter->priv;
> +	struct quad8_iio *const priv = counter->priv;
>  	const size_t channel_id = signal->id / 2;
> -	const bool disabled = !(priv->cable_fault_enable & BIT(channel_id));
> +	bool disabled;
>  	unsigned int status;
>  	unsigned int fault;
>  
> -	if (disabled)
> +	spin_lock(&priv->lock);
> +
> +	disabled = !(priv->cable_fault_enable & BIT(channel_id));
> +
> +	if (disabled) {
> +		spin_unlock(&priv->lock);
>  		return -EINVAL;
> +	}
>  
>  	/* Logic 0 = cable fault */
>  	status = inb(priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
>  
> +	spin_unlock(&priv->lock);
> +
>  	/* Mask respective channel and invert logic */
>  	fault = !(status & BIT(channel_id));
>  
> @@ -1194,6 +1202,8 @@ static ssize_t quad8_signal_cable_fault_enable_write(
>  	if (ret)
>  		return ret;
>  
> +	spin_lock(&priv->lock);
> +
>  	if (enable)
>  		priv->cable_fault_enable |= BIT(channel_id);
>  	else
> @@ -1204,6 +1214,8 @@ static ssize_t quad8_signal_cable_fault_enable_write(
>  
>  	outb(cable_fault_enable, priv->base + QUAD8_DIFF_ENCODER_CABLE_STATUS);
>  
> +	spin_unlock(&priv->lock);
> +
>  	return len;
>  }
>  
> -- 
> 2.7.4
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

      reply	other threads:[~2020-03-13 16:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-13 12:01 [PATCH v4 2/3] counter: 104-quad-8: Add lock guards - differential encoder cable Syed Nayyar Waris
2020-03-13 16:51 ` William Breathitt Gray [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200313165136.GB5024@icarus \
    --to=vilhelm.gray@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syednwaris@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.