All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bhaskar Chowdhury <unixbhaskar@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux 5.6-rc6 ..built...compile..boot without fuss!
Date: Mon, 16 Mar 2020 14:48:57 +0530	[thread overview]
Message-ID: <20200316091857.GA27510@Slackware> (raw)
In-Reply-To: <CAHk-=whcVTGVPtvdb9SdCcjLawG6tLvbNWfWB_Y6=QhovFy2rg@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 22120 bytes --]

On 15:19 Sun 15 Mar 2020, Linus Torvalds wrote:
>Another week, another rc.
>
>Things look normal - all the stats look like they usually do at this point.
>
>The full patch is about 60% driver changes (gpu, networking, s390
>stand out, but there's noise all over), with the rest being tooling
>(mainly perf), networking, arch updates (mainly x86, but some arc,
>mips and s390 too), and misc core updates.
>
>Diffstat looks normal, and the number of commits is right in the
>middle of the usual range too. And I don't think any of the commits
>look all that strange either - it's all pretty small.
>
>So please test,
>
>            Linus
>


Well, it built,compile and booted without fuss! Take a peek at dead end
below:


[    3.103124] EXT4-fs (sda): recovery complete
[    3.109505] EXT4-fs (sda): mounted filesystem with ordered data mode.
Opts: (null)
[    3.111031] ext4 filesystem being mounted at /root supports
timestamps until 2038 (0x7fffffff)
[    3.111953] VFS: Mounted root (ext4 filesystem) on device 8:0.
[    3.125388] devtmpfs: mounted
[    3.135268] Freeing unused decrypted memory: 2040K
[    3.194353] Freeing unused kernel image (initmem) memory: 1568K
[    3.195229] Write protecting the kernel read-only data: 26624k
[    3.199142] Freeing unused kernel image (text/rodata gap) memory:
2040K
[    3.200798] Freeing unused kernel image (rodata/data gap) memory:
1040K
[    3.201638] rodata_test: all tests were successful
[    3.202033] Run /sbin/init as init process
[    3.244008] process '/bin/busybox' started with executable stack
[    3.333309] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[    3.333856] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1fa37202099, max_idle_ns: 440795206796 ns
[    3.334647] clocksource: Switched to clocksource tsc
[    3.435414] EXT4-fs (sda): re-mounted. Opts: (null)
[    3.436007] ext4 filesystem being remounted at / supports timestamps
until 2038 (0x7fffffff)
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Initializing random number generator... [    4.489653] random: dd:
uninitialized urandom read (512 bytes read)
done.
Starting network: OK

Welcome to Buildroot
buildroot login: root[    9.292919] random: crng init done

# uname -a
Linux buildroot 5.6.0-rc6 #1 SMP Mon Mar 16 11:34:58 IST 2020 x86_64
GNU/Linux


~Bhaskar




>---
>
>Al Viro (2):
>      gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
>      cifs_atomic_open(): fix double-put on late allocation failure
>
>Amir Goldstein (2):
>      ovl: fix lock in ovl_llseek()
>      ovl: fix some xino configurations
>
>Amol Grover (2):
>      iommu/vt-d: Fix RCU list debugging warnings
>      net: caif: Add lockdep expression to RCU traversal primitive
>
>Andrea Parri (1):
>      workqueue: Document (some) memory-ordering properties of
>{queue,schedule}_work()
>
>Andrew Lunn (2):
>      net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
>      net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
>
>Anson Huang (1):
>      clk: imx8mn: Fix incorrect clock defines
>
>Arnaldo Carvalho de Melo (5):
>      perf tests bp_account: Make global variable static
>      perf env: Do not return pointers to local variables
>      perf parse-events: Use asprintf() instead of strncpy() to read
>tracepoint files
>      perf bench: Share some global variables to fix build with gcc 10
>      perf symbols: Don't try to find a vmlinux file when looking for
>kernel modules
>
>Artem Savkov (1):
>      ftrace: Return the first found result in lookup_rec()
>
>Ben Chuang (1):
>      mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x
>
>Can Guo (1):
>      scsi: ufs: Fix possible unclocked access to auto hibern8 timer register
>
>Charles Keepax (2):
>      pinctrl: core: Remove extra kref_get which blocks hogs being freed
>      pinctrl: madera: Add missing call to pinctrl_unregister_mappings
>
>Chris Packham (1):
>      net: mvmdio: avoid error message for optional IRQ
>
>Chris Wilson (5):
>      drm/i915: Actually emit the await_start
>      drm/i915: Return early for await_start on same timeline
>      drm/i915/execlists: Enable timeslice on partial virtual engine dequeue
>      drm/i915/gt: Close race between cacheline_retire and free
>      drm/i915: Defer semaphore priority bumping to a workqueue
>
>Christian Borntraeger (1):
>      KVM: s390: Also reset registers in sync regs for initial cpu reset
>
>Christian Brauner (1):
>      pid: make ENOMEM return value more obvious
>
>Christoph Hellwig (1):
>      driver code: clarify and fix platform device DMA mask allocation
>
>Colin Ian King (1):
>      net: systemport: fix index check to avoid an array out of bounds access
>
>Corey Minyard (1):
>      pid: Fix error return value in some cases
>
>Cyril Hrubis (1):
>      sys/sysinfo: Respect boottime inside time namespace
>
>Dajun Jin (1):
>      drivers/of/of_mdio.c:fix of_mdiobus_register()
>
>Dan Carpenter (1):
>      net: nfc: fix bounds checking bugs on "pipe"
>
>Dan Moulding (1):
>      iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices
>
>Daniel Drake (1):
>      iommu/vt-d: Ignore devices with out-of-spec domain number
>
>Davide Caratti (1):
>      tc-testing: add ETS scheduler to tdc build configuration
>
>Dmitry Bogdanov (2):
>      net: macsec: update SCI upon MAC address change.
>      net: macsec: invoke mdo_upd_secy callback when mac address changed
>
>Dmitry Yakunin (2):
>      inet_diag: return classid for all socket types
>      cgroup, netclassid: periodically release file_lock on classid updating
>
>Dominik Czarnota (1):
>      sxgbe: Fix off by one in samsung driver strncpy size arg
>
>Edward Cree (1):
>      sfc: detach from cb_page in efx_copy_channel()
>
>Edwin Peer (1):
>      bnxt_en: fix error handling when flashing from file
>
>Eric Biggers (1):
>      fscrypt: don't evict dirty inodes after removing key
>
>Eric Dumazet (5):
>      slip: make slhc_compress() more robust against malicious packets
>      bonding/alb: make sure arp header is pulled before accessing it
>      gre: fix uninit-value in __iptunnel_pull_header
>      ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()
>      net: memcg: fix lockdep splat in inet_csk_accept()
>
>Eugeniy Paltsev (1):
>      ARC: define __ALIGN_STR and __ALIGN symbols for ARC
>
>Felix Fietkau (1):
>      mt76: fix array overflow on receiving too many fragments for a packet
>
>Florian Westphal (2):
>      netfilter: nf_tables: free flowtable hooks on hook register error
>      netfilter: nf_tables: fix infinite loop when expr is not available
>
>Geert Uytterhoeven (2):
>      ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
>      of: clk: Make of_clk_get_parent_{count,name}() parameter const
>
>Gustavo A. R. Silva (1):
>      auxdisplay: charlcd: replace zero-length array with flexible-array member
>
>H. Nikolaus Schaller (2):
>      MIPS: DTS: CI20: fix PMU definitions for ACT8600
>      MIPS: DTS: CI20: fix interrupt for pcf8563 RTC
>
>Haiwei Li (1):
>      KVM: SVM: Fix the svm vmexit code for WRMSR
>
>Halil Pasic (2):
>      virtio-blk: fix hw_queue stopped on arbitrary error
>      virtio-blk: improve virtqueue error to BLK_STS
>
>Hamish Martin (1):
>      i2c: gpio: suppress error on probe defer
>
>Hangbin Liu (5):
>      net/ipv6: use configured metric when add peer route
>      net/ipv6: need update peer route when modify metric
>      net/ipv6: remove the old peer route if change it to a new one
>      selftests/net/fib_tests: update addr_metric_test for peer route testing
>      ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface
>
>Hans de Goede (3):
>      iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
>      iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn
>+ add_taint
>      iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with
>pr_warn + add_taint
>
>Hauke Mehrtens (1):
>      phylink: Improve error message when validate failed
>
>Hawking Zhang (1):
>      drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
>
>Heiner Kallweit (2):
>      net: phy: avoid clearing PHY interrupts twice in irq handler
>      net: phy: fix MDIO bus PM PHY resuming
>
>Hersen Wu (1):
>      drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of
>watermark to smu during boot up
>
>Hillf Danton (1):
>      workqueue: don't use wq_select_unbound_cpu() for bound works
>
>Ian Rogers (1):
>      tools: Fix off-by 1 relative directory includes
>
>Jacob Keller (1):
>      devlink: remove trigger command from devlink-region.rst
>
>Jakub Kicinski (26):
>      devlink: validate length of param values
>      devlink: validate length of region addr/len
>      fib: add missing attribute validation for tun_id
>      nl802154: add missing attribute validation
>      nl802154: add missing attribute validation for dev_type
>      can: add missing attribute validation for termination
>      macsec: add missing attribute validation for port
>      openvswitch: add missing attribute validation for hash
>      net: fq: add missing attribute validation for orphan mask
>      net: taprio: add missing attribute validation for txtime delay
>      team: add missing attribute validation for port ifindex
>      team: add missing attribute validation for array index
>      tipc: add missing attribute validation for MTU property
>      nfc: add missing attribute validation for SE API
>      nfc: add missing attribute validation for deactivate target
>      nfc: add missing attribute validation for vendor subcommand
>      netfilter: cthelper: add missing attribute validation for cthelper
>      netfilter: nft_payload: add missing attribute validation for
>payload csum flags
>      netfilter: nft_tunnel: add missing attribute validation for tunnels
>      MAINTAINERS: remove bouncing pkaustub@cisco.com from enic
>      MAINTAINERS: update cxgb4vf maintainer to Vishal
>      nl80211: add missing attribute validation for critical protocol indication
>      nl80211: add missing attribute validation for beacon report scanning
>      nl80211: add missing attribute validation for channel switch
>      net: fec: validate the new settings in fec_enet_set_coalesce()
>      MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
>
>Jann Horn (1):
>      afs: Use kfree_rcu() instead of casting kfree() to rcu_callback_t
>
>Jarkko Nikula (1):
>      i2c: designware-pci: Fix BUG_ON during device removal
>
>Jason A. Donenfeld (2):
>      crypto: x86/curve25519 - support assemblers with no adx support
>      KVM: fix Kconfig menu text for -Werror
>
>Jens Axboe (1):
>      io_uring: ensure RCU callback ordering with rcu_barrier()
>
>Jian Shen (4):
>      net: hns3: fix a not link up issue when fibre port supports autoneg
>      net: hns3: fix VF VLAN table entries inconsistent issue
>      net: hns3: fix RMW issue for VLAN filter switch
>      net: hns3: clear port base VLAN when unload PF
>
>Jiang Lidong (1):
>      veth: ignore peer tx_dropped when counting local rx_dropped
>
>Jiri Wiesner (1):
>      ipvlan: do not add hardware address of master to its unicast filter list
>
>John Garry (1):
>      perf jevents: Fix leak of mapfile memory
>
>Jonas Gorski (1):
>      net: phy: bcm63xx: fix OOPS due to missing driver name
>
>Jonathan Neuschäfer (2):
>      docs: networking: net_failover: Fix a few typos
>      rhashtable: Document the right function parameters
>
>Julian Wiedmann (6):
>      s390/qeth: don't reset default_out_queue
>      s390/qeth: handle error when backing RX buffer
>      s390/qeth: cancel RX reclaim work earlier
>      s390/qeth: use page pointers to manage RX buffer pool
>      s390/qeth: refactor buffer pool code
>      s390/qeth: implement smarter resizing of the RX buffer pool
>
>Juliet Kim (1):
>      ibmvnic: Do not process device remove during device reset
>
>Karsten Graul (1):
>      net/smc: cancel event worker during device removal
>
>Kim Phillips (1):
>      perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
>
>Krzysztof Kozlowski (2):
>      ARC: Cleanup old Kconfig IO scheduler options
>      auxdisplay: Fix Kconfig indentation
>
>Leonard Crestez (1):
>      pinctrl: imx: scu: Align imx sc msg structs to 4
>
>Linus Torvalds (1):
>      Linux 5.6-rc6
>
>Linus Walleij (2):
>      pinctrl: qcom: ssbi-gpio: Fix fwspec parsing bug
>      pinctrl: qcom: Assign irq_eoi conditionally
>
>Lyude Paul (4):
>      drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant
>      drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks
>      drm/dp_mst: Reprobe path resources in CSN handler
>      drm/dp_mst: Rewrite and fix bandwidth limit checks
>
>Madalin Bucur (4):
>      dt-bindings: net: FMan erratum A050385
>      arm64: dts: ls1043a: FMan erratum A050385
>      fsl/fman: detect FMan erratum A050385
>      dpaa_eth: FMan erratum A050385 workaround
>
>Mahesh Bandewar (3):
>      ipvlan: don't deref eth hdr before checking it's set
>      ipvlan: add cond_resched_rcu() while processing muticast backlog
>      macvlan: add cond_resched() during multicast processing
>
>Marc Zyngier (2):
>      iommu/dma: Fix MSI reservation allocation
>      irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
>
>Marek Szyprowski (1):
>      drm/exynos: Fix cleanup of IOMMU related objects
>
>Martin Leung (1):
>      drm/amd/display: update soc bb for nv14
>
>Masanari Iida (3):
>      linux-next: DOC: RDS: Fix a typo in rds.txt
>      ktest: Fix some typos in sample.conf
>      ktest: Fix typos in ktest.pl
>
>Mathias Kresin (1):
>      pinctrl: falcon: fix syntax error
>
>Matthew Auld (1):
>      drm/i915: be more solid in checking the alignment
>
>Megha Dey (2):
>      iommu/vt-d: Fix debugfs register reads
>      iommu/vt-d: Populate debugfs if IOMMUs are detected
>
>Michael Auchter (1):
>      misc: eeprom: at24: fix regulator underflow
>
>Michal Koutný (1):
>      cgroup: Iterate tasks that did not finish do_exit()
>
>Miguel Ojeda (1):
>      clang-format: Update with the latest for_each macro list
>
>Mika Westerberg (3):
>      watchdog: iTCO_wdt: Export vendorsupport
>      watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
>      i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
>
>Mike Gilbert (1):
>      cpupower: avoid multiple definition with gcc -fno-common
>
>Miklos Szeredi (2):
>      fuse: fix stack use after return
>      ovl: fix lockdep warning for async write
>
>Ming Lei (1):
>      blk-mq: insert flush request to the front of dispatch queue
>
>Nathan Chancellor (2):
>      virtio_balloon: Adjust label in virtballoon_probe
>      dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom
>
>Nick Desaulniers (1):
>      perf diff: Fix undefined string comparision spotted by clang's
>-Wstring-compare
>
>Nicolas Belin (1):
>      pinctrl: meson-gxl: fix GPIOX sdio pins
>
>Nicolas Cavallari (1):
>      mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
>
>Nitesh Narayan Lal (1):
>      KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
>
>Pablo Neira Ayuso (3):
>      netlink: Use netlink header as base to calculate bad attribute offset
>      netfilter: nf_tables: dump NFTA_CHAIN_FLAGS attribute
>      netfilter: nft_chain_nat: inet family is missing module ownership
>
>Paolo Abeni (1):
>      mptcp: always include dack if possible.
>
>Paolo Lungaroni (1):
>      seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
>
>Paul Cercueil (1):
>      MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling
>
>Peter Xu (1):
>      x86/vector: Remove warning on managed interrupt migration
>
>Peter Zijlstra (1):
>      futex: Fix inode life-time issue
>
>Qian Cai (3):
>      cgroup: fix psi_show() crash on 32bit ino archs
>      iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
>      iommu/vt-d: Silence RCU-list debugging warnings
>
>Randy Dunlap (2):
>      ARC: fix some Kconfig typos
>      atm: nicstar: fix if-statement empty body warning
>
>Remi Pommarel (1):
>      net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used
>
>Robin Murphy (1):
>      iommu/io-pgtable-arm: Fix IOVA validation for 32-bit
>
>Russell King (2):
>      net: dsa: mv88e6xxx: fix lockup on warm boot
>      net: dsa: fix phylink_start()/phylink_stop() calls
>
>Scott Mayhew (4):
>      NFS: Ensure the fs_context has the correct fs_type before mounting
>      NFS: Don't hard-code the fs_type when submounting
>      NFS: Fix leak of ctx->nfs_server.hostname
>      nfs: add minor version to nfs_server_key for fscache
>
>Sean Christopherson (1):
>      KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
>
>Shakeel Butt (2):
>      cgroup: memcg: net: do not associate sock with unrelated cgroup
>      net: memcg: late association of sock to memcg
>
>Shannon Nelson (1):
>      ionic: fix vf op lock usage
>
>Shin'ichiro Kawasaki (1):
>      block: Fix partition support for host aware zoned block devices
>
>Stefan Haberland (1):
>      s390/dasd: fix data corruption for thin provisioned devices
>
>Stephen Boyd (1):
>      mmc: sdhci-msm: Mark sdhci_msm_cqe_disable static
>
>Steven Rostedt (VMware) (2):
>      ktest: Make default build option oldconfig not randconfig
>      ktest: Add timeout for ssh sync testing
>
>Suman Anna (1):
>      virtio_ring: Fix mem leak with vring_new_virtqueue()
>
>Suravee Suthikulpanit (1):
>      iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
>
>Sven Eckelmann (1):
>      batman-adv: Don't schedule OGM for disabled interface
>
>Takashi Iwai (1):
>      ipmi_si: Avoid spurious errors for optional IRQs
>
>Taniya Das (2):
>      clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
>      clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
>
>Tejun Heo (1):
>      blk-iocost: fix incorrect vtime comparison in iocg_is_idle()
>
>Thomas Bogendoerfer (1):
>      MAINTAINERS: Correct MIPS patchwork URL
>
>Thomas Gleixner (2):
>      x86/mce/therm_throt: Undo thermal polling properly on CPU offline
>      futex: Unbreak futex hashing
>
>Tina Zhang (2):
>      drm/i915/gvt: Fix emulated vbt size issue
>      drm/i915/gvt: Fix dma-buf display blur issue on CFL
>
>Tom Lendacky (1):
>      x86/ioremap: Map EFI runtime services data as encrypted for SEV
>
>Tom Zhao (1):
>      sfc: complete the next packet when we receive a timestamp
>
>Tommi Rantala (3):
>      perf top: Fix stdio interface input handling with glibc 2.28+
>      perf bench futex-wake: Restore thread count default to online CPU count
>      perf bench: Clear struct sigaction before sigaction() syscall
>
>Tony Luck (1):
>      x86/mce: Fix logic and comments around MSR_PPIN_CTL
>
>Tycho Andersen (1):
>      cgroup1: don't call release_agent when it is ""
>
>Ulf Hansson (5):
>      mmc: core: Allow host controllers to require R1B for CMD6
>      mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
>      mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
>      mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
>      mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
>
>Vasily Averin (6):
>      cgroup-v1: cgroup_pidlist_next should update position index
>      cgroup: cgroup_procs_next should increase position index
>      netfilter: nf_conntrack: ct_cpu_seq_next should increase position index
>      netfilter: synproxy: synproxy_cpu_seq_next should increase position index
>      netfilter: xt_recent: recent_seq_next should increase position index
>      netfilter: x_tables: xt_mttg_seq_next should increase position index
>
>Vasundhara Volam (1):
>      bnxt_en: reinitialize IRQs when MTU is modified
>
>Vineet Gupta (2):
>      ARC: fpu: fix randconfig build error reported by 0-day test service
>      ARC: show_regs: reduce lines of output
>
>Vinicius Costa Gomes (1):
>      taprio: Fix sending packets without dequeueing them
>
>Vishal Kulkarni (1):
>      cxgb4: fix checks for max queues to allocate
>
>Vitaly Kuznetsov (3):
>      KVM: x86: clear stale x86_emulate_ctxt->intercept value
>      KVM: x86: remove stale comment from struct x86_emulate_ctxt
>      KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
>
>Vladimir Oltean (2):
>      net: dsa: sja1105: Don't destroy not-yet-created xmit_worker
>      net: mscc: ocelot: properly account for VLAN header length when
>setting MRU
>
>Vladis Dronov (2):
>      efi: Fix a race and a buffer overflow while reading efivars via sysfs
>      efi: Add a sanity check to efivar_store_raw()
>
>Wanpeng Li (1):
>      KVM: X86: Fix dereference null cpufreq policy
>
>Wen Xiong (1):
>      scsi: ipr: Fix softlockup when rescanning devices in petitboot
>
>Willem de Bruijn (1):
>      net/packet: tpacket_rcv: do not increment ring index on drop
>
>Wolfram Sang (2):
>      macintosh: windfarm: fix MODINFO regression
>      i2c: acpi: put device when verifying client fails
>
>Yangtao Li (1):
>      auxdisplay: img-ascii-lcd: convert to devm_platform_ioremap_resource
>
>Yonghyun Hwang (1):
>      iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
>
>Yonglong Liu (1):
>      net: hns3: fix "tc qdisc del" failed issue
>
>You-Sheng Yang (1):
>      r8152: check disconnect status after long sleep
>
>Zhenyu Wang (1):
>      drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
>
>Zhenzhong Duan (1):
>      iommu/vt-d: Fix the wrong printing in RHSA parsing

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

      reply	other threads:[~2020-03-16  9:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-15 22:19 Linux 5.6-rc6 Linus Torvalds
2020-03-16  9:18 ` Bhaskar Chowdhury [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200316091857.GA27510@Slackware \
    --to=unixbhaskar@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.