All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Peter Rosin <peda@axentia.se>,
	linux-i2c@vger.kernel.org, Wolfram Sang <wsa@the-dreams.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 2/4] i2c: mux: pca954x: Make use of device properties
Date: Mon, 16 Mar 2020 18:07:22 +0200	[thread overview]
Message-ID: <20200316160724.37596-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20200316160724.37596-1-andriy.shevchenko@linux.intel.com>

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: dropped I2C table ID changes (Peter)
 drivers/i2c/muxes/i2c-mux-pca954x.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index b764c7c746e9..928c6f5ceac7 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -43,10 +43,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/mux/mux.h>
@@ -198,7 +196,6 @@ static const struct i2c_device_id pca954x_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca954x_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id pca954x_of_match[] = {
 	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
 	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
@@ -215,7 +212,6 @@ static const struct of_device_id pca954x_of_match[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, pca954x_of_match);
-#endif
 
 /* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
    for this as they will try to lock adapter a second time */
@@ -426,7 +422,6 @@ static int pca954x_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
-	struct device_node *np = dev->of_node;
 	struct gpio_desc *gpio;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
@@ -456,7 +451,7 @@ static int pca954x_probe(struct i2c_client *client,
 		udelay(1);
 	}
 
-	data->chip = of_device_get_match_data(dev);
+	data->chip = device_get_match_data(dev);
 	if (!data->chip)
 		data->chip = &chips[id->driver_data];
 
@@ -478,8 +473,8 @@ static int pca954x_probe(struct i2c_client *client,
 	}
 
 	data->idle_state = MUX_IDLE_AS_IS;
-	if (of_property_read_u32(np, "idle-state", &data->idle_state)) {
-		if (np && of_property_read_bool(np, "i2c-mux-idle-disconnect"))
+	if (device_property_read_u32(dev, "idle-state", &data->idle_state)) {
+		if (device_property_read_bool(dev, "i2c-mux-idle-disconnect"))
 			data->idle_state = MUX_IDLE_DISCONNECT;
 	}
 
@@ -562,7 +557,7 @@ static struct i2c_driver pca954x_driver = {
 	.driver		= {
 		.name	= "pca954x",
 		.pm	= &pca954x_pm,
-		.of_match_table = of_match_ptr(pca954x_of_match),
+		.of_match_table = pca954x_of_match,
 	},
 	.probe		= pca954x_probe,
 	.remove		= pca954x_remove,
-- 
2.25.1

  reply	other threads:[~2020-03-16 16:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-16 16:07 [PATCH v2 1/4] i2c: mux: pca954x: Refactor pca954x_irq_handler() Andy Shevchenko
2020-03-16 16:07 ` Andy Shevchenko [this message]
2020-03-16 16:07 ` [PATCH v2 3/4] i2c: mux: pca954x: Move device_remove_file() out of pca954x_cleanup() Andy Shevchenko
2020-03-16 16:07 ` [PATCH v2 4/4] i2c: mux: pca954x: Convert license to SPDX identifier Andy Shevchenko
2020-03-25 21:43 ` [PATCH v2 1/4] i2c: mux: pca954x: Refactor pca954x_irq_handler() Andy Shevchenko
2020-04-15 14:48   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200316160724.37596-2-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.