All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Zhang <markz@mellanox.com>,
	linux-rdma@vger.kernel.org, Maor Gottlieb <maorg@mellanox.com>,
	netdev@vger.kernel.org, Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next 1/6] net/mlx5: Enable SW-defined RoCEv2 UDP source port
Date: Wed, 18 Mar 2020 11:52:55 +0200	[thread overview]
Message-ID: <20200318095300.45574-2-leon@kernel.org> (raw)
In-Reply-To: <20200318095300.45574-1-leon@kernel.org>

From: Mark Zhang <markz@mellanox.com>

When this is enabled, UDP source port for RoCEv2 packets are defined
by software instead of firmware.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 39 +++++++++++++++++++
 include/linux/mlx5/mlx5_ifc.h                 |  5 ++-
 2 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 6b38ec72215a..bdc73370297b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -585,6 +585,39 @@ static int handle_hca_cap(struct mlx5_core_dev *dev)
 	return err;
 }
 
+static int handle_hca_cap_roce(struct mlx5_core_dev *dev)
+{
+	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
+	void *set_hca_cap;
+	void *set_ctx;
+	int err;
+
+	if (!MLX5_CAP_GEN(dev, roce))
+		return 0;
+
+	err = mlx5_core_get_caps(dev, MLX5_CAP_ROCE);
+	if (err)
+		return err;
+
+	if (MLX5_CAP_ROCE(dev, sw_r_roce_src_udp_port) ||
+	    !MLX5_CAP_ROCE_MAX(dev, sw_r_roce_src_udp_port))
+		return 0;
+
+	set_ctx = kzalloc(set_sz, GFP_KERNEL);
+	if (!set_ctx)
+		return -ENOMEM;
+
+	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
+	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ROCE],
+	       MLX5_ST_SZ_BYTES(roce_cap));
+	MLX5_SET(roce_cap, set_hca_cap, sw_r_roce_src_udp_port, 1);
+
+	err = set_caps(dev, set_ctx, set_sz, MLX5_SET_HCA_CAP_OP_MOD_ROCE);
+
+	kfree(set_ctx);
+	return err;
+}
+
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
 	int err;
@@ -607,6 +640,12 @@ static int set_hca_cap(struct mlx5_core_dev *dev)
 		goto out;
 	}
 
+	err = handle_hca_cap_roce(dev);
+	if (err) {
+		mlx5_core_err(dev, "handle_hca_cap_roce failed\n");
+		goto out;
+	}
+
 out:
 	return err;
 }
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 208bf1127be7..bb217c3f30da 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -74,6 +74,7 @@ enum {
 	MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE        = 0x0,
 	MLX5_SET_HCA_CAP_OP_MOD_ODP                   = 0x2,
 	MLX5_SET_HCA_CAP_OP_MOD_ATOMIC                = 0x3,
+	MLX5_SET_HCA_CAP_OP_MOD_ROCE                  = 0x4,
 };
 
 enum {
@@ -902,7 +903,9 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 
 struct mlx5_ifc_roce_cap_bits {
 	u8         roce_apm[0x1];
-	u8         reserved_at_1[0x1f];
+	u8         reserved_at_1[0x3];
+	u8         sw_r_roce_src_udp_port[0x1];
+	u8         reserved_at_5[0x1b];
 
 	u8         reserved_at_20[0x60];
 
-- 
2.24.1


  reply	other threads:[~2020-03-18  9:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-18  9:52 [PATCH rdma-next 0/6] Set flow_label and RoCEv2 UDP source port for datagram QP Leon Romanovsky
2020-03-18  9:52 ` Leon Romanovsky [this message]
2020-03-18 23:33   ` [PATCH mlx5-next 1/6] net/mlx5: Enable SW-defined RoCEv2 UDP source port Saeed Mahameed
2020-03-19  6:05     ` Leon Romanovsky
2020-03-20  1:16       ` Saeed Mahameed
2020-03-18  9:52 ` [PATCH rdma-next 2/6] RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and " Leon Romanovsky
2020-03-18  9:52 ` [PATCH rdma-next 3/6] RDMA/mlx5: Define RoCEv2 udp source port when set path Leon Romanovsky
2020-03-18  9:52 ` [PATCH rdma-next 4/6] RDMA/cma: Initialize the flow label of CM's route path record Leon Romanovsky
2020-03-18  9:52 ` [PATCH rdma-next 5/6] RDMA/cm: Set flow label of recv_wc based on primary flow label Leon Romanovsky
2020-03-18  9:53 ` [PATCH rdma-next 6/6] RDMA/mlx5: Set UDP source port based on the grh.flow_label Leon Romanovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200318095300.45574-2-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=dledford@redhat.com \
    --cc=jgg@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=maorg@mellanox.com \
    --cc=markz@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=saeedm@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.